[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <f6dabbf17ee2d839e53d305de819acd8fab72fad.1577271823.git.agx@sigxcpu.org>
Date: Wed, 25 Dec 2019 12:07:17 +0100
From: Guido Günther <agx@...xcpu.org>
To: Jacek Anaszewski <jacek.anaszewski@...il.com>,
Pavel Machek <pavel@....cz>, Dan Murphy <dmurphy@...com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 4/6] leds: lm3692x: Allow to configure brigthness mode
Brightness mode is currently hardcoded as linear in the driver. Make
exponential mode configurable via DT.
Signed-off-by: Guido Günther <agx@...xcpu.org>
---
drivers/leds/leds-lm3692x.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/leds/leds-lm3692x.c b/drivers/leds/leds-lm3692x.c
index 28973cc5a6cc..ff20560a8263 100644
--- a/drivers/leds/leds-lm3692x.c
+++ b/drivers/leds/leds-lm3692x.c
@@ -115,7 +115,7 @@ struct lm3692x_led {
int led_enable;
int model_id;
- u8 boost_ctrl;
+ u8 boost_ctrl, brightness_ctrl;
};
static const struct reg_default lm3692x_reg_defs[] = {
@@ -267,8 +267,7 @@ static int lm3692x_init(struct lm3692x_led *led)
if (ret)
goto out;
- ret = regmap_write(led->regmap, LM3692X_BRT_CTRL,
- LM3692X_BL_ADJ_POL | LM3692X_RAMP_EN);
+ ret = regmap_write(led->regmap, LM3692X_BRT_CTRL, led->brightness_ctrl);
if (ret)
goto out;
@@ -326,6 +325,7 @@ static int lm3692x_probe_dt(struct lm3692x_led *led)
struct fwnode_handle *child = NULL;
struct led_init_data init_data = {};
u32 ovp;
+ bool exp_mode;
int ret;
led->enable_gpio = devm_gpiod_get_optional(&led->client->dev,
@@ -376,6 +376,12 @@ static int lm3692x_probe_dt(struct lm3692x_led *led)
}
}
+ led->brightness_ctrl = LM3692X_BL_ADJ_POL | LM3692X_RAMP_EN;
+ exp_mode = device_property_read_bool(&led->client->dev,
+ "ti,brightness-mapping-exponential");
+ if (exp_mode)
+ led->brightness_ctrl |= LM3692X_MAP_MODE_EXP;
+
child = device_get_next_child_node(&led->client->dev, child);
if (!child) {
dev_err(&led->client->dev, "No LED Child node\n");
--
2.23.0
Powered by blists - more mailing lists