| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f1cdc0d47a434e318d7eee11c0e6c364@realtek.com>
Date: Mon, 30 Dec 2019 14:39:15 +0000
From: James Tai <james.tai@...ltek.com>
To: Andreas Färber <afaerber@...e.de>,
"linux-realtek-soc@...ts.infradead.org"
<linux-realtek-soc@...ts.infradead.org>
CC: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
"Mark Rutland" <mark.rutland@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Subject: RE: [PATCH 03/14] arm64: dts: realtek: rtd139x: Introduce CRT, iso and misc syscon
> Group the non-iso reset controller nodes into a CRT syscon mfd node.
> Group reset controller, watchdog and UART0 into an Isolation mfd node.
> Group UART1 and UART2 into a Miscellaneous syscon mfd node.
>
> Cc: James Tai <james.tai@...ltek.com>
> Signed-off-by: Andreas Färber <afaerber@...e.de>
> ---
> arch/arm64/boot/dts/realtek/rtd139x.dtsi | 147
> +++++++++++++++++++------------
> 1 file changed, 90 insertions(+), 57 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/realtek/rtd139x.dtsi
> b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
> index c11a505e43e2..3a571f3b7e38 100644
> --- a/arch/arm64/boot/dts/realtek/rtd139x.dtsi
> +++ b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
> @@ -61,70 +61,31 @@
> #size-cells = <1>;
> ranges = <0x0 0x98000000 0x200000>;
>
> - reset1: reset-controller@0 {
> - compatible = "snps,dw-low-reset";
> - reg = <0x0 0x4>;
> - #reset-cells = <1>;
> - };
> -
> - reset2: reset-controller@4 {
> - compatible = "snps,dw-low-reset";
> - reg = <0x4 0x4>;
> - #reset-cells = <1>;
> - };
> -
> - reset3: reset-controller@8 {
> - compatible = "snps,dw-low-reset";
> - reg = <0x8 0x4>;
> - #reset-cells = <1>;
> - };
> -
> - reset4: reset-controller@50 {
> - compatible = "snps,dw-low-reset";
> - reg = <0x50 0x4>;
> - #reset-cells = <1>;
> - };
> -
> - iso_reset: reset-controller@...8 {
> - compatible = "snps,dw-low-reset";
> - reg = <0x7088 0x4>;
> - #reset-cells = <1>;
> - };
> -
> - wdt: watchdog@...0 {
> - compatible = "realtek,rtd1295-watchdog";
> - reg = <0x7680 0x100>;
> - clocks = <&osc27M>;
> - };
> -
> - uart0: serial@...0 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x7800 0x400>;
> - reg-shift = <2>;
> + crt: syscon@0 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x0 0x1000>;
> reg-io-width = <4>;
> - clock-frequency = <27000000>;
> - resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
> - status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0x1000>;
> };
>
> - uart1: serial@...00 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x1b200 0x100>;
> - reg-shift = <2>;
> + iso: syscon@...0 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x7000 0x1000>;
> reg-io-width = <4>;
> - clock-frequency = <432000000>;
> - resets = <&reset2 RTD1295_RSTN_UR1>;
> - status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x7000 0x1000>;
> };
>
> - uart2: serial@...00 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x1b400 0x100>;
> - reg-shift = <2>;
> + misc: syscon@...00 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x1b000 0x1000>;
> reg-io-width = <4>;
> - clock-frequency = <432000000>;
> - resets = <&reset2 RTD1295_RSTN_UR2>;
> - status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1b000 0x1000>;
> };
> };
>
> @@ -140,3 +101,75 @@
> };
> };
> };
> +
> +&crt {
> + reset1: reset-controller@0 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x0 0x4>;
> + #reset-cells = <1>;
> + };
> +
> + reset2: reset-controller@4 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x4 0x4>;
> + #reset-cells = <1>;
> + };
> +
> + reset3: reset-controller@8 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x8 0x4>;
> + #reset-cells = <1>;
> + };
> +
> + reset4: reset-controller@50 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x50 0x4>;
> + #reset-cells = <1>;
> + };
> +};
> +
> +&iso {
> + iso_reset: reset-controller@88 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x88 0x4>;
> + #reset-cells = <1>;
> + };
> +
> + wdt: watchdog@680 {
> + compatible = "realtek,rtd1295-watchdog";
> + reg = <0x680 0x100>;
> + clocks = <&osc27M>;
> + };
> +
> + uart0: serial@800 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x800 0x400>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <27000000>;
> + resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
> + status = "disabled";
> + };
> +};
> +
> +&misc {
> + uart1: serial@200 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x200 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <432000000>;
> + resets = <&reset2 RTD1295_RSTN_UR1>;
> + status = "disabled";
> + };
> +
> + uart2: serial@400 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x400 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <432000000>;
> + resets = <&reset2 RTD1295_RSTN_UR2>;
> + status = "disabled";
> + };
> +};
> --
> 2.16.4
>
>
Acked-by: James Tai <james.tai@...ltek.com>
Powered by blists - more mailing lists