[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <76cf24f1-4d72-2dec-ef80-36d6d3744ebe@ti.com>
Date: Mon, 6 Jan 2020 10:55:30 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Al Cooper <alcooperx@...il.com>, <linux-kernel@...r.kernel.org>
CC: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Florian Fainelli <f.fainelli@...il.com>,
"maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE"
<bcm-kernel-feedback-list@...adcom.com>,
Srinath Mannam <srinath.mannam@...adcom.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v4 00/13] phy: usb: Updates to Broadcom STB USB PHY driver
On 03/01/20 11:47 PM, Al Cooper wrote:
> This patchset contains various updates to the Broadcom STB USB Driver.
> The updates include:
> - Add support for 7216 and 7211 Broadcom SoCs which use the new
> Synopsys USB Controller.
> - Add support for USB Wake
> - Add various bug fixes.
merged, thanks!
-Kishon
>
>
> v4 - Fix mispelling, change Synopsis to Synopsys. Also add
> "Reviewed-by: Rob Herring" to bindings patch. There are no
> functional code changes in v4.
>
> v3 - Rebase to v5.5-rc1
>
> v2 - Changes based on review feedback
> - Add vendor prefix to DT property "syscon-piarbctl"
> - Use standard "wakeup" instead of "wake" for DT "interrupt-names"
>
> Al Cooper (13):
> phy: usb: EHCI DMA may lose a burst of DMA data for 7255xA0 family
> phy: usb: Get all drivers that use USB clks using correct
> enable/disable
> phy: usb: Put USB phys into IDDQ on suspend to save power in S2 mode
> phy: usb: Add "wake on" functionality
> phy: usb: Restructure in preparation for adding 7216 USB support
> dt-bindings: Add Broadcom STB USB PHY binding document
> phy: usb: Add support for new Synopsys USB controller on the 7216
> phy: usb: Add support for new Synopsys USB controller on the 7211b0
> phy: usb: fix driver to defer on clk_get defer
> phy: usb: PHY's MDIO registers not accessible without device installed
> phy: usb: bdc: Fix occasional failure with BDC on 7211
> phy: usb: USB driver is crashing during S3 resume on 7216
> phy: usb: Add support for wake and USB low power mode for 7211 S2/S5
>
> .../bindings/phy/brcm,brcmstb-usb-phy.txt | 69 ++-
> drivers/phy/broadcom/Makefile | 2 +-
> .../phy/broadcom/phy-brcm-usb-init-synopsys.c | 414 ++++++++++++++++++
> drivers/phy/broadcom/phy-brcm-usb-init.c | 226 +++++-----
> drivers/phy/broadcom/phy-brcm-usb-init.h | 148 ++++++-
> drivers/phy/broadcom/phy-brcm-usb.c | 269 ++++++++++--
> 6 files changed, 943 insertions(+), 185 deletions(-)
> create mode 100644 drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
>
Powered by blists - more mailing lists