[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200108090804.22889-1-rjliao@codeaurora.org>
Date: Wed, 8 Jan 2020 17:08:02 +0800
From: Rocky Liao <rjliao@...eaurora.org>
To: marcel@...tmann.org, johan.hedberg@...il.com
Cc: mka@...omium.org, linux-kernel@...r.kernel.org,
linux-bluetooth@...r.kernel.org, linux-arm-msm@...r.kernel.org,
Rocky Liao <rjliao@...eaurora.org>
Subject: [PATCH v2 1/3] Bluetooth: hci_qca: Add qca_power_on() API to support both wcn399x and Rome power up
This patch adds a unified API qca_power_on() to support both wcn399x and
Rome power on. For wcn399x it calls the qca_wcn3990_init() to init the
regulators, and for Rome it pulls up the bt_en GPIO to power up the btsoc.
Signed-off-by: Rocky Liao <rjliao@...eaurora.org>
---
Changes in v2: None
drivers/bluetooth/hci_qca.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 9392cc7f9908..f6555bd1adbc 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1532,6 +1532,27 @@ static int qca_wcn3990_init(struct hci_uart *hu)
return 0;
}
+static int qca_power_on(struct hci_dev *hdev)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+ enum qca_btsoc_type soc_type = qca_soc_type(hu);
+ struct qca_serdev *qcadev;
+ int ret = 0;
+
+ if (qca_is_wcn399x(soc_type)) {
+ ret = qca_wcn3990_init(hu);
+ } else {
+ if (hu->serdev) {
+ qcadev = serdev_device_get_drvdata(hu->serdev);
+ gpiod_set_value_cansleep(qcadev->bt_en, 1);
+ /* Controller needs time to bootup. */
+ msleep(150);
+ }
+ }
+
+ return ret;
+}
+
static int qca_setup(struct hci_uart *hu)
{
struct hci_dev *hdev = hu->hdev;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Powered by blists - more mailing lists