| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200116110515.20480-1-kishon@ti.com>
Date: Thu, 16 Jan 2020 16:35:15 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC: Kishon Vijay Abraham I <kishon@...com>,
<linux-kernel@...r.kernel.org>
Subject: [GIT PULL] PHY: For 5.6
Hi Greg,
Please find the pull request for 5.6 merge window below.
PHY core now creates a device link between PHY consumer and PHY
provider required for suspend/resume ordering and also adds support
for DisplayPort controller to pass configuration parameters to PHY.
It includes new PHY drivers for TI's J721E SoC (PCIe and USB), eMMC
PHY driver for Intel's LGM SoC and USB PHY driver for Broadcom
SoC.
For the detailed list of changes, please see the tag message below.
All these changes have been in linux -next for a while now.
Consider merging this for the next merge window and let me know if I
have to change something.
Thanks
Kishon
The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:
Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git tags/phy-for-5.6
for you to fetch changes up to 28a263814638c3c63093e0bf682eec1e451054d9:
dt-bindings: phy: Add PHY_TYPE_DP definition (2020-01-14 10:50:19 +0530)
----------------------------------------------------------------
phy: for 5.6
*) Add support in PHY core to create link between PHY consumer and PHY
provider
*) Add DisplayPort PHY configuration set to be used for negotiating the
configurations to be used between DisplayPort controller and
DisplayPort PHY
*) Add PHY wrapper driver (configure inputs to Cadence Sierra PHY) for
TI's J721E SoC and adapt Cadence Sierra PHY driver to be used for
J721E SoC (Supports USB and PCIe)
*) Add PHY driver for eMMC PHY in Intel LGM SoC
*) Add PHY support for 7216 and 7211 Broadcom SoCs which uses the new
Synopsys USB Controller
*) Add support for 16nm SATA PHY present in Broadcom 7216 SoC
*) Fix lost packet issue, fix MDIO from getting inaccessible, fix
occasional transaction failures, fix USB driver from crashing in
Broadcom USB PHY driver
*) Fix missing PCS SW reset in UFS PHY of Qualcomm SM8150
*) Use "struct phy_configure_opts_mipi_dphy" to pass parameters from
display controller to rockchip-inno-dsidphy
*) Other cleanups including compile testing for some of the PHY drivers,
fixing Kconfig indentation, duplicate writes in drivers etc.,
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
----------------------------------------------------------------
Al Cooper (13):
phy: usb: EHCI DMA may lose a burst of DMA data for 7255xA0 family
phy: usb: Get all drivers that use USB clks using correct enable/disable
phy: usb: Put USB phys into IDDQ on suspend to save power in S2 mode
phy: usb: Add "wake on" functionality
phy: usb: Restructure in preparation for adding 7216 USB support
dt-bindings: Add Broadcom STB USB PHY binding document
phy: usb: Add support for new Synopsys USB controller on the 7216
phy: usb: Add support for new Synopsys USB controller on the 7211b0
phy: usb: fix driver to defer on clk_get defer
phy: usb: PHY's MDIO registers not accessible without device installed
phy: usb: bdc: Fix occasional failure with BDC on 7211
phy: usb: USB driver is crashing during S3 resume on 7216
phy: usb: Add support for wake and USB low power mode for 7211 S2/S5
Alexandre Torgue (1):
phy: core: Add consumer device link support
Anil Varughese (1):
phy: cadence: Sierra: Configure both lane cdb and common cdb registers for external SSC
Chuhong Yuan (1):
phy: ti-pipe3: make clk operations symmetric in probe and remove
Colin Ian King (1):
phy: cadence: Sierra: remove redundant initialization of pointer regmap
Florian Fainelli (2):
dt-bindings: phy: Document BCM7216 SATA PHY compatible string
phy: brcm-sata: Implement 7216 initialization sequence
Heiko Stuebner (2):
dt-bindings: phy: drop #clock-cells from rockchip,px30-dsi-dphy
phy/rockchip: inno-dsidphy: generalize parameter handling
Jyri Sarha (1):
dt-bindings: phy: Add PHY_TYPE_DP definition
Kishon Vijay Abraham I (13):
dt-bindings: phy: Sierra: Add bindings for Sierra in TI's J721E
phy: cadence: Sierra: Make "phy_clk" and "sierra_apb" optional resources
phy: cadence: Sierra: Use "regmap" for read and write to Sierra registers
phy: cadence: Sierra: Add support for SERDES_16G used in J721E SoC
phy: cadence: Sierra: Make cdns_sierra_phy_init() as phy_ops
phy: cadence: Sierra: Modify register macro names to be in sync with Sierra user guide
phy: cadence: Sierra: Get reset control "array" for each link
phy: cadence: Sierra: Check for PLL lock during PHY power on
phy: cadence: Sierra: Change MAX_LANES of Sierra to 16
phy: cadence: Sierra: Set cmn_refclk_dig_div/cmn_refclk1_dig_div frequency to 25MHz
phy: cadence: Sierra: Use correct dev pointer in cdns_sierra_phy_remove()
dt-bindings: phy: Document WIZ (SERDES wrapper) bindings
phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC
Krzysztof Kozlowski (3):
phy: hisilicon: Fix Kconfig indentation
phy: mediatek: Fix Kconfig indentation
phy: Enable compile testing for some of drivers
Ma Feng (1):
phy: lantiq: vrx200-pcie: Remove unneeded semicolon
Maxime Ripard (1):
dt-bindings: usb: Convert Allwinner A80 USB PHY controller to a schema
Nathan Chancellor (1):
phy: qualcomm: Adjust indentation in read_poll_timeout
Nishad Kamdar (1):
phy: qcom-qmp: Use the correct style for SPDX License Identifier
Ramuthevar Vadivel Murugan (3):
dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY
phy: intel-lgm-emmc: Add support for eMMC PHY
phy: intel-lgm-emmc: Fix warning by adding missing MODULE_LICENSE
Roger Quadros (3):
phy: cadence: Sierra: add phy_reset hook
dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO
phy: ti: j721e-wiz: Manage typec-gpio-dir
Vinod Koul (4):
phy: qcom-qmp: Use register defines
phy: qcom-qmp: remove duplicate powerdown write
phy: qcom-qmp: remove no_pcs_sw_reset for sm8150
phy: qcom-qmp: Add SW reset register
Wei Yongjun (1):
phy: ti: j721e-wiz: Fix return value check in wiz_probe()
Yuti Amonkar (1):
phy: Add DisplayPort configuration options
Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml | 135 ++++++++++++++++++
Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt | 69 +++++++--
Documentation/devicetree/bindings/phy/brcm-sata-phy.txt | 1 +
Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml | 56 ++++++++
Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt | 13 +-
Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml | 5 -
Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt | 37 -----
Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml | 221 +++++++++++++++++++++++++++++
drivers/phy/Kconfig | 1 +
drivers/phy/Makefile | 1 +
drivers/phy/allwinner/Kconfig | 3 +-
drivers/phy/broadcom/Kconfig | 4 +-
drivers/phy/broadcom/Makefile | 2 +-
drivers/phy/broadcom/phy-brcm-sata.c | 120 ++++++++++++++++
drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c | 414 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/phy/broadcom/phy-brcm-usb-init.c | 226 +++++++++++++++---------------
drivers/phy/broadcom/phy-brcm-usb-init.h | 148 ++++++++++++++++++--
drivers/phy/broadcom/phy-brcm-usb.c | 269 ++++++++++++++++++++++++++++-------
drivers/phy/cadence/phy-cadence-sierra.c | 709 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------
drivers/phy/hisilicon/Kconfig | 16 +--
drivers/phy/intel/Kconfig | 9 ++
drivers/phy/intel/Makefile | 2 +
drivers/phy/intel/phy-intel-emmc.c | 284 +++++++++++++++++++++++++++++++++++++
drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c | 2 +-
drivers/phy/marvell/Kconfig | 8 +-
drivers/phy/mediatek/Kconfig | 25 ++--
drivers/phy/phy-core.c | 49 ++++++-
drivers/phy/qualcomm/phy-qcom-apq8064-sata.c | 2 +-
drivers/phy/qualcomm/phy-qcom-qmp.c | 7 +-
drivers/phy/qualcomm/phy-qcom-qmp.h | 2 +-
drivers/phy/rockchip/Kconfig | 1 +
drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c | 319 +++++++++++++-----------------------------
drivers/phy/samsung/Kconfig | 8 +-
drivers/phy/ti/Kconfig | 19 ++-
drivers/phy/ti/Makefile | 1 +
drivers/phy/ti/phy-j721e-wiz.c | 959 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/phy/ti/phy-ti-pipe3.c | 18 +--
drivers/usb/renesas_usbhs/rcar2.c | 2 +-
drivers/usb/renesas_usbhs/rza2.c | 2 +-
include/dt-bindings/phy/phy.h | 1 +
include/linux/phy/phy-dp.h | 95 +++++++++++++
include/linux/phy/phy.h | 14 +-
42 files changed, 3635 insertions(+), 644 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
delete mode 100644 Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
create mode 100644 drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
create mode 100644 drivers/phy/intel/Kconfig
create mode 100644 drivers/phy/intel/Makefile
create mode 100644 drivers/phy/intel/phy-intel-emmc.c
create mode 100644 drivers/phy/ti/phy-j721e-wiz.c
create mode 100644 include/linux/phy/phy-dp.h
Powered by blists - more mailing lists