| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200128133343.29905-22-b.zolnierkie@samsung.com>
Date: Tue, 28 Jan 2020 14:33:36 +0100
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Jens Axboe <axboe@...nel.dk>
Cc: Michael Schmitz <schmitzmic@...il.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org,
b.zolnierkie@...sung.com
Subject: [PATCH 21/28] ata: move ata_qc_complete_multiple() to
libata-core-sata.c
* move ata_qc_complete_multiple() to libata-core-sata.c
Code size savings on m68k arch using atari_defconfig:
text data bss dec hex filename
before:
33212 572 40 33824 8420 drivers/ata/libata-core.o
after:
32815 572 40 33427 8293 drivers/ata/libata-core.o
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
---
drivers/ata/libata-core-sata.c | 59 ++++++++++++++++++++++++++++++++++
drivers/ata/libata-core.c | 59 ----------------------------------
include/linux/libata.h | 2 +-
3 files changed, 60 insertions(+), 60 deletions(-)
diff --git a/drivers/ata/libata-core-sata.c b/drivers/ata/libata-core-sata.c
index 8c6ed82dc166..5749aa57c352 100644
--- a/drivers/ata/libata-core-sata.c
+++ b/drivers/ata/libata-core-sata.c
@@ -772,6 +772,65 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
}
EXPORT_SYMBOL_GPL(sata_link_hardreset);
+/**
+ * ata_qc_complete_multiple - Complete multiple qcs successfully
+ * @ap: port in question
+ * @qc_active: new qc_active mask
+ *
+ * Complete in-flight commands. This functions is meant to be
+ * called from low-level driver's interrupt routine to complete
+ * requests normally. ap->qc_active and @qc_active is compared
+ * and commands are completed accordingly.
+ *
+ * Always use this function when completing multiple NCQ commands
+ * from IRQ handlers instead of calling ata_qc_complete()
+ * multiple times to keep IRQ expect status properly in sync.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * Number of completed commands on success, -errno otherwise.
+ */
+int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active)
+{
+ u64 done_mask, ap_qc_active = ap->qc_active;
+ int nr_done = 0;
+
+ /*
+ * If the internal tag is set on ap->qc_active, then we care about
+ * bit0 on the passed in qc_active mask. Move that bit up to match
+ * the internal tag.
+ */
+ if (ap_qc_active & (1ULL << ATA_TAG_INTERNAL)) {
+ qc_active |= (qc_active & 0x01) << ATA_TAG_INTERNAL;
+ qc_active ^= qc_active & 0x01;
+ }
+
+ done_mask = ap_qc_active ^ qc_active;
+
+ if (unlikely(done_mask & qc_active)) {
+ ata_port_err(ap, "illegal qc_active transition (%08llx->%08llx)\n",
+ ap->qc_active, qc_active);
+ return -EINVAL;
+ }
+
+ while (done_mask) {
+ struct ata_queued_cmd *qc;
+ unsigned int tag = __ffs64(done_mask);
+
+ qc = ata_qc_from_tag(ap, tag);
+ if (qc) {
+ ata_qc_complete(qc);
+ nr_done++;
+ }
+ done_mask &= ~(1ULL << tag);
+ }
+
+ return nr_done;
+}
+EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
+
/**
* sata_link_init_spd - Initialize link->sata_spd_limit
* @link: Link to configure sata_spd_limit for
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 17f1d98eab71..204e64ff4b93 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4456,65 +4456,6 @@ u64 ata_qc_get_active(struct ata_port *ap)
}
EXPORT_SYMBOL_GPL(ata_qc_get_active);
-/**
- * ata_qc_complete_multiple - Complete multiple qcs successfully
- * @ap: port in question
- * @qc_active: new qc_active mask
- *
- * Complete in-flight commands. This functions is meant to be
- * called from low-level driver's interrupt routine to complete
- * requests normally. ap->qc_active and @qc_active is compared
- * and commands are completed accordingly.
- *
- * Always use this function when completing multiple NCQ commands
- * from IRQ handlers instead of calling ata_qc_complete()
- * multiple times to keep IRQ expect status properly in sync.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- *
- * RETURNS:
- * Number of completed commands on success, -errno otherwise.
- */
-int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active)
-{
- u64 done_mask, ap_qc_active = ap->qc_active;
- int nr_done = 0;
-
- /*
- * If the internal tag is set on ap->qc_active, then we care about
- * bit0 on the passed in qc_active mask. Move that bit up to match
- * the internal tag.
- */
- if (ap_qc_active & (1ULL << ATA_TAG_INTERNAL)) {
- qc_active |= (qc_active & 0x01) << ATA_TAG_INTERNAL;
- qc_active ^= qc_active & 0x01;
- }
-
- done_mask = ap_qc_active ^ qc_active;
-
- if (unlikely(done_mask & qc_active)) {
- ata_port_err(ap, "illegal qc_active transition (%08llx->%08llx)\n",
- ap->qc_active, qc_active);
- return -EINVAL;
- }
-
- while (done_mask) {
- struct ata_queued_cmd *qc;
- unsigned int tag = __ffs64(done_mask);
-
- qc = ata_qc_from_tag(ap, tag);
- if (qc) {
- ata_qc_complete(qc);
- nr_done++;
- }
- done_mask &= ~(1ULL << tag);
- }
-
- return nr_done;
-}
-EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
-
/**
* ata_qc_issue - issue taskfile to device
* @qc: command to issue to device
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 453322cdf64a..62e962b62c5d 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1166,7 +1166,6 @@ extern void ata_id_c_string(const u16 *id, unsigned char *s,
extern unsigned int ata_do_dev_read_id(struct ata_device *dev,
struct ata_taskfile *tf, u16 *id);
extern void ata_qc_complete(struct ata_queued_cmd *qc);
-extern int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active);
extern u64 ata_qc_get_active(struct ata_port *ap);
extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd);
extern int ata_std_bios_param(struct scsi_device *sdev,
@@ -1202,6 +1201,7 @@ extern int ata_slave_link_init(struct ata_port *ap);
extern void ata_tf_to_fis(const struct ata_taskfile *tf,
u8 pmp, int is_cmd, u8 *fis);
extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
+extern int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active);
extern bool sata_lpm_ignore_phy_events(struct ata_link *link);
#else
static inline int sata_set_spd(struct ata_link *link) { return -EOPNOTSUPP; }
--
2.24.1
Powered by blists - more mailing lists