lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200204101008.11411-5-olivier.moysan@st.com>
Date:   Tue, 4 Feb 2020 11:10:08 +0100
From:   Olivier Moysan <olivier.moysan@...com>
To:     <jic23@...nel.org>, <robh+dt@...nel.org>, <olivier.moysan@...com>
CC:     <mark.rutland@....com>, <knaack.h@....de>, <lars@...afoo.de>,
        <devicetree@...r.kernel.org>, <linux-iio@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <pmeerw@...erw.net>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH 4/4] iio: adc: stm32-dfsdm: add scale and offset support

Add scale and offset attributes support to STM32 DFSDM.

Signed-off-by: Olivier Moysan <olivier.moysan@...com>
---
 drivers/iio/adc/stm32-dfsdm-adc.c | 105 +++++++++++++++++++++++++++++-
 1 file changed, 102 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
index 07b9dfdf8e76..b85fd3e90496 100644
--- a/drivers/iio/adc/stm32-dfsdm-adc.c
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -10,6 +10,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/iio/adc/stm32-dfsdm-adc.h>
 #include <linux/iio/buffer.h>
+#include <linux/iio/consumer.h>
 #include <linux/iio/hw-consumer.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/timer/stm32-lptim-trigger.h>
@@ -67,6 +68,13 @@ struct stm32_dfsdm_dev_data {
 	const struct regmap_config *regmap_cfg;
 };
 
+struct stm32_dfsdm_sd_chan_info {
+	int scale_val;
+	int scale_val2;
+	int offset;
+	unsigned int differential;
+};
+
 struct stm32_dfsdm_adc {
 	struct stm32_dfsdm *dfsdm;
 	const struct stm32_dfsdm_dev_data *dev_data;
@@ -79,6 +87,7 @@ struct stm32_dfsdm_adc {
 	struct iio_hw_consumer *hwc;
 	struct completion completion;
 	u32 *buffer;
+	struct stm32_dfsdm_sd_chan_info *sd_chan;
 
 	/* Audio specific */
 	unsigned int spi_freq;  /* SPI bus clock frequency */
@@ -1271,7 +1280,10 @@ static int stm32_dfsdm_read_raw(struct iio_dev *indio_dev,
 				int *val2, long mask)
 {
 	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
-	int ret;
+	struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id];
+	struct stm32_dfsdm_filter_osr *flo = &fl->flo[fl->fast];
+	u32 max = flo->max << (flo->lshift - chan->scan_type.shift);
+	int ret, idx = chan->scan_index;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
@@ -1307,6 +1319,41 @@ static int stm32_dfsdm_read_raw(struct iio_dev *indio_dev,
 		*val = adc->sample_freq;
 
 		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		/*
+		 * Scale is expressed in mV.
+		 * When fast mode is disabled, actual resolution may be lower
+		 * than 2^n, where n=realbits-1.
+		 * This leads to underestimating input voltage. To
+		 * compensate this deviation, the voltage reference can be
+		 * corrected with a factor = realbits resolution / actual max
+		 */
+		*val = div_u64((u64)adc->sd_chan[idx].scale_val *
+			       (u64)BIT(DFSDM_DATA_RES - 1), max);
+		*val2 = chan->scan_type.realbits;
+		if (adc->sd_chan[idx].differential)
+			*val *= 2;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+
+	case IIO_CHAN_INFO_OFFSET:
+		/*
+		 * DFSDM output data are in the range [-2^n,2^n-1],
+		 * with n=realbits-1.
+		 * - Differential modulator:
+		 * Offset correspond to SD modulator offset.
+		 * - Single ended modulator:
+		 * Input is in [0V,Vref] range, where 0V corresponds to -2^n.
+		 * Add 2^n to offset. (i.e. middle of input range)
+		 * offset = offset(sd) * vref / res(sd) * max / vref.
+		 */
+		*val = div_u64((u64)max * adc->sd_chan[idx].offset,
+			       BIT(adc->sd_chan[idx].scale_val2 - 1));
+		if (!adc->sd_chan[idx].differential)
+			*val += max;
+
+		return IIO_VAL_INT;
 	}
 
 	return -EINVAL;
@@ -1430,7 +1477,9 @@ static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
 	 * IIO_CHAN_INFO_RAW: used to compute regular conversion
 	 * IIO_CHAN_INFO_OVERSAMPLING_RATIO: used to set oversampling
 	 */
-	ch->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
+	ch->info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				 BIT(IIO_CHAN_INFO_SCALE) |
+				 BIT(IIO_CHAN_INFO_OFFSET);
 	ch->info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) |
 					BIT(IIO_CHAN_INFO_SAMP_FREQ);
 
@@ -1481,8 +1530,10 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
 {
 	struct iio_chan_spec *ch;
 	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+	struct iio_channel *channels, *chan;
+	struct stm32_dfsdm_sd_chan_info *sd_chan;
 	int num_ch;
-	int ret, chan_idx;
+	int ret, chan_idx, val2;
 
 	adc->oversamp = DFSDM_DEFAULT_OVERSAMPLING;
 	ret = stm32_dfsdm_compute_all_osrs(indio_dev, adc->oversamp);
@@ -1506,6 +1557,22 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
 	if (!ch)
 		return -ENOMEM;
 
+	/* Get SD modulator channels */
+	channels = iio_channel_get_all(&indio_dev->dev);
+	if (IS_ERR(channels)) {
+		dev_err(&indio_dev->dev, "Failed to get channel %ld\n",
+			PTR_ERR(channels));
+		return PTR_ERR(channels);
+	}
+	chan = &channels[0];
+
+	adc->sd_chan = devm_kzalloc(&indio_dev->dev,
+				    sizeof(*adc->sd_chan) * num_ch, GFP_KERNEL);
+	if (!adc->sd_chan)
+		return -ENOMEM;
+
+	sd_chan = adc->sd_chan;
+
 	for (chan_idx = 0; chan_idx < num_ch; chan_idx++) {
 		ch[chan_idx].scan_index = chan_idx;
 		ret = stm32_dfsdm_adc_chan_init_one(indio_dev, &ch[chan_idx]);
@@ -1513,6 +1580,38 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
 			dev_err(&indio_dev->dev, "Channels init failed\n");
 			return ret;
 		}
+
+		if (!chan->indio_dev)
+			return -EINVAL;
+
+		ret = iio_read_channel_scale(chan, &sd_chan->scale_val,
+					     &sd_chan->scale_val2);
+		if (ret < 0) {
+			dev_err(&indio_dev->dev,
+				"Failed to get channel %d scale\n", chan_idx);
+			return ret;
+		}
+
+		if (iio_channel_has_info(chan->channel, IIO_CHAN_INFO_OFFSET)) {
+			ret = iio_read_channel_offset(chan, &sd_chan->offset,
+						      &val2);
+			if (ret < 0) {
+				dev_err(&indio_dev->dev,
+					"Failed to get channel %d offset\n",
+					chan_idx);
+				return ret;
+			}
+		}
+
+		sd_chan->differential = chan->channel->differential;
+
+		dev_dbg(&indio_dev->dev, "Channel %d %s scale ref=%d offset=%d",
+			chan_idx, chan->channel->differential ?
+			"differential" : "single-ended",
+			sd_chan->scale_val, sd_chan->offset);
+
+		chan++;
+		sd_chan++;
 	}
 
 	indio_dev->num_channels = num_ch;
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ