linux-kernel - [v1] dt-bindings: msm:disp: update dsi and dpu bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1580825737-27189-1-git-send-email-harigovi@codeaurora.org>
Date:   Tue,  4 Feb 2020 19:45:37 +0530
From:   Harigovindan P <harigovi@...eaurora.org>
To:     dri-devel@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org,
        freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org
Cc:     Harigovindan P <harigovi@...eaurora.org>,
        linux-kernel@...r.kernel.org, robdclark@...il.com,
        seanpaul@...omium.org, hoegsberg@...omium.org,
        kalyan_t@...eaurora.org, nganji@...eaurora.org
Subject: [v1] dt-bindings: msm:disp: update dsi and dpu bindings

Updating bindings of dsi and dpu by adding and removing certain
properties.

Signed-off-by: Harigovindan P <harigovi@...eaurora.org>
---

Changes in v1:
        - Adding "ahb" clock as a required property.
        - Adding "bus", "rot", "lut" as optional properties for sc7180 device.
        - Removing properties from dsi bindings that are unused.
	- Removing power-domain property since DSI is the child node of MDSS
	  and it will inherit supply from its parent.

 Documentation/devicetree/bindings/display/msm/dpu.txt | 7 +++++++
 Documentation/devicetree/bindings/display/msm/dsi.txt | 5 -----
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
index 551ae26..dd58472a 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
@@ -19,6 +19,7 @@ Required properties:
   The following clocks are required:
   * "iface"
   * "bus"
+  * "ahb"
   * "core"
 - interrupts: interrupt signal from MDSS.
 - interrupt-controller: identifies the node as an interrupt controller.
@@ -50,6 +51,8 @@ Required properties:
 - clock-names: device clock names, must be in same order as clocks property.
   The following clocks are required.
   * "bus"
+  For the device "qcom,sc7180-dpu":
+  * "bus" - is an optional property due to architecture change.
   * "iface"
   * "core"
   * "vsync"
@@ -70,6 +73,10 @@ Optional properties:
 - assigned-clocks: list of clock specifiers for clocks needing rate assignment
 - assigned-clock-rates: list of clock frequencies sorted in the same order as
   the assigned-clocks property.
+- For the device "qcom,sc7180-dpu":
+  clock-names: optional device clocks, needed for accessing LUT blocks.
+  * "rot"
+  * "lut"
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index af95586..61d659a 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -8,13 +8,10 @@ Required properties:
 - reg-names: The names of register regions. The following regions are required:
   * "dsi_ctrl"
 - interrupts: The interrupt signal from the DSI block.
-- power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: Phandles to device clocks.
 - clock-names: the following clocks are required:
-  * "mdp_core"
   * "iface"
   * "bus"
-  * "core_mmss"
   * "byte"
   * "pixel"
   * "core"
@@ -156,7 +153,6 @@ Example:
 			"core",
 			"core_mmss",
 			"iface",
-			"mdp_core",
 			"pixel";
 		clocks =
 			<&mmcc MDSS_AXI_CLK>,
@@ -164,7 +160,6 @@ Example:
 			<&mmcc MDSS_ESC0_CLK>,
 			<&mmcc MMSS_MISC_AHB_CLK>,
 			<&mmcc MDSS_AHB_CLK>,
-			<&mmcc MDSS_MDP_CLK>,
 			<&mmcc MDSS_PCLK0_CLK>;
 
 		assigned-clocks =
-- 
2.7.4