| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200206080014.13759-6-wambui.karugax@gmail.com>
Date: Thu, 6 Feb 2020 11:00:06 +0300
From: Wambui Karuga <wambui.karugax@...il.com>
To: jani.nikula@...ux.intel.com, joonas.lahtinen@...ux.intel.com,
rodrigo.vivi@...el.com, airlied@...ux.ie, daniel@...ll.ch
Cc: sean@...rly.run, intel-gfx@...ts.freedesktop.org,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 05/12] drm/i915/crt: automatic conversion to drm_device based logging macros.
Replaces various instances of the printk based logging macros with the
struct drm_device based logging macros in i915/display/intel_crt.c using
the following coccinelle script that matches based on the existence of a
drm_i915_private device pointer:
@@
identifier fn, T;
@@
fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
@@
identifier fn, T;
@@
fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
Checkpatch warnings were addressed manually.
Signed-off-by: Wambui Karuga <wambui.karugax@...il.com>
---
drivers/gpu/drm/i915/display/intel_crt.c | 49 +++++++++++++++---------
1 file changed, 31 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c
index 0e2f63b0d458..45ecc7d9c829 100644
--- a/drivers/gpu/drm/i915/display/intel_crt.c
+++ b/drivers/gpu/drm/i915/display/intel_crt.c
@@ -420,7 +420,8 @@ static int hsw_crt_compute_config(struct intel_encoder *encoder,
/* LPT FDI RX only supports 8bpc. */
if (HAS_PCH_LPT(dev_priv)) {
if (pipe_config->bw_constrained && pipe_config->pipe_bpp < 24) {
- DRM_DEBUG_KMS("LPT only supports 24bpp\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "LPT only supports 24bpp\n");
return -EINVAL;
}
@@ -449,7 +450,8 @@ static bool ilk_crt_detect_hotplug(struct drm_connector *connector)
crt->force_hotplug_required = false;
save_adpa = adpa = intel_de_read(dev_priv, crt->adpa_reg);
- DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
+ drm_dbg_kms(&dev_priv->drm,
+ "trigger hotplug detect cycle: adpa=0x%x\n", adpa);
adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
if (turn_off_dac)
@@ -461,7 +463,8 @@ static bool ilk_crt_detect_hotplug(struct drm_connector *connector)
crt->adpa_reg,
ADPA_CRT_HOTPLUG_FORCE_TRIGGER,
1000))
- DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
+ drm_dbg_kms(&dev_priv->drm,
+ "timed out waiting for FORCE_TRIGGER");
if (turn_off_dac) {
intel_de_write(dev_priv, crt->adpa_reg, save_adpa);
@@ -475,7 +478,8 @@ static bool ilk_crt_detect_hotplug(struct drm_connector *connector)
ret = true;
else
ret = false;
- DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);
+ drm_dbg_kms(&dev_priv->drm, "ironlake hotplug adpa=0x%x, result %d\n",
+ adpa, ret);
return ret;
}
@@ -505,7 +509,8 @@ static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
reenable_hpd = intel_hpd_disable(dev_priv, crt->base.hpd_pin);
save_adpa = adpa = intel_de_read(dev_priv, crt->adpa_reg);
- DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
+ drm_dbg_kms(&dev_priv->drm,
+ "trigger hotplug detect cycle: adpa=0x%x\n", adpa);
adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
@@ -513,7 +518,8 @@ static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
if (intel_de_wait_for_clear(dev_priv, crt->adpa_reg,
ADPA_CRT_HOTPLUG_FORCE_TRIGGER, 1000)) {
- DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
+ drm_dbg_kms(&dev_priv->drm,
+ "timed out waiting for FORCE_TRIGGER");
intel_de_write(dev_priv, crt->adpa_reg, save_adpa);
}
@@ -524,7 +530,8 @@ static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
else
ret = false;
- DRM_DEBUG_KMS("valleyview hotplug adpa=0x%x, result %d\n", adpa, ret);
+ drm_dbg_kms(&dev_priv->drm,
+ "valleyview hotplug adpa=0x%x, result %d\n", adpa, ret);
if (reenable_hpd)
intel_hpd_enable(dev_priv, crt->base.hpd_pin);
@@ -564,7 +571,8 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
/* wait for FORCE_DETECT to go off */
if (intel_de_wait_for_clear(dev_priv, PORT_HOTPLUG_EN,
CRT_HOTPLUG_FORCE_DETECT, 1000))
- DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
+ drm_dbg_kms(&dev_priv->drm,
+ "timed out waiting for FORCE_DETECT to go off");
}
stat = intel_de_read(dev_priv, PORT_HOTPLUG_STAT);
@@ -635,13 +643,16 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector)
* have to check the EDID input spec of the attached device.
*/
if (!is_digital) {
- DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "CRT detected via DDC:0x50 [EDID]\n");
ret = true;
} else {
- DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
}
} else {
- DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [no valid EDID found]\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "CRT not detected via DDC:0x50 [no valid EDID found]\n");
}
kfree(edid);
@@ -666,7 +677,7 @@ intel_crt_load_detect(struct intel_crt *crt, u32 pipe)
u8 st00;
enum drm_connector_status status;
- DRM_DEBUG_KMS("starting load-detect on CRT\n");
+ drm_dbg_kms(&dev_priv->drm, "starting load-detect on CRT\n");
bclrpat_reg = BCLRPAT(pipe);
vtotal_reg = VTOTAL(pipe);
@@ -807,9 +818,9 @@ intel_crt_detect(struct drm_connector *connector,
int status, ret;
struct intel_load_detect_pipe tmp;
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] force=%d\n",
- connector->base.id, connector->name,
- force);
+ drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s] force=%d\n",
+ connector->base.id, connector->name,
+ force);
if (i915_modparams.load_detect_test) {
wakeref = intel_display_power_get(dev_priv,
@@ -830,11 +841,13 @@ intel_crt_detect(struct drm_connector *connector,
* only trust an assertion that the monitor is connected.
*/
if (intel_crt_detect_hotplug(connector)) {
- DRM_DEBUG_KMS("CRT detected via hotplug\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "CRT detected via hotplug\n");
status = connector_status_connected;
goto out;
} else
- DRM_DEBUG_KMS("CRT not detected via hotplug\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "CRT not detected via hotplug\n");
}
if (intel_crt_detect_ddc(connector)) {
@@ -930,7 +943,7 @@ void intel_crt_reset(struct drm_encoder *encoder)
intel_de_write(dev_priv, crt->adpa_reg, adpa);
intel_de_posting_read(dev_priv, crt->adpa_reg);
- DRM_DEBUG_KMS("crt adpa set to 0x%x\n", adpa);
+ drm_dbg_kms(&dev_priv->drm, "crt adpa set to 0x%x\n", adpa);
crt->force_hotplug_required = true;
}
--
2.25.0
Powered by blists - more mailing lists