| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200206080014.13759-7-wambui.karugax@gmail.com>
Date: Thu, 6 Feb 2020 11:00:07 +0300
From: Wambui Karuga <wambui.karugax@...il.com>
To: jani.nikula@...ux.intel.com, joonas.lahtinen@...ux.intel.com,
rodrigo.vivi@...el.com, airlied@...ux.ie, daniel@...ll.ch
Cc: sean@...rly.run, intel-gfx@...ts.freedesktop.org,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 06/12] drm/i915/dp_aux_backlight: convert to drm_device based logging macros.
Conversion of the printk based drm logging macros to the struct
drm_device based logging macros in display/intel_dp_aux_backlight.c.
This also involves extracting the drm_i915_private device pointer from
various intel types to use in the macros.
Note that this converts DRM_DEBUG_DRIVER to drm_dbg().
References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@...il.com>
---
.../drm/i915/display/intel_dp_aux_backlight.c | 72 ++++++++++++-------
1 file changed, 45 insertions(+), 27 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
index e86feebef299..83d9c76e4da9 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
@@ -35,8 +35,9 @@ static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
®_val) < 0) {
- DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
- DP_EDP_DISPLAY_CONTROL_REGISTER);
+ drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
+ "Failed to read DPCD register 0x%x\n",
+ DP_EDP_DISPLAY_CONTROL_REGISTER);
return;
}
if (enable)
@@ -46,8 +47,9 @@ static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
reg_val) != 1) {
- DRM_DEBUG_KMS("Failed to %s aux backlight\n",
- enable ? "enable" : "disable");
+ drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
+ "Failed to %s aux backlight\n",
+ enable ? "enable" : "disable");
}
}
@@ -65,8 +67,9 @@ static u32 intel_dp_aux_get_backlight(struct intel_connector *connector)
if (drm_dp_dpcd_readb(&intel_dp->aux,
DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
&mode_reg) != 1) {
- DRM_DEBUG_KMS("Failed to read the DPCD register 0x%x\n",
- DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
+ drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
+ "Failed to read the DPCD register 0x%x\n",
+ DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
return 0;
}
@@ -80,8 +83,9 @@ static u32 intel_dp_aux_get_backlight(struct intel_connector *connector)
if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
&read_val, sizeof(read_val)) < 0) {
- DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
- DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
+ drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
+ "Failed to read DPCD register 0x%x\n",
+ DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
return 0;
}
level = read_val[0];
@@ -111,7 +115,8 @@ intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state, u32 lev
}
if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
vals, sizeof(vals)) < 0) {
- DRM_DEBUG_KMS("Failed to write aux backlight level\n");
+ drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
+ "Failed to write aux backlight level\n");
return;
}
}
@@ -133,7 +138,8 @@ static bool intel_dp_aux_set_pwm_freq(struct intel_connector *connector)
freq = dev_priv->vbt.backlight.pwm_freq_hz;
if (!freq) {
- DRM_DEBUG_KMS("Use panel default backlight frequency\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "Use panel default backlight frequency\n");
return false;
}
@@ -146,13 +152,14 @@ static bool intel_dp_aux_set_pwm_freq(struct intel_connector *connector)
fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
if (fxp_min > fxp_actual || fxp_actual > fxp_max) {
- DRM_DEBUG_KMS("Actual frequency out of range\n");
+ drm_dbg_kms(&dev_priv->drm, "Actual frequency out of range\n");
return false;
}
if (drm_dp_dpcd_writeb(&intel_dp->aux,
DP_EDP_BACKLIGHT_FREQ_SET, (u8) f) < 0) {
- DRM_DEBUG_KMS("Failed to write aux backlight freq\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "Failed to write aux backlight freq\n");
return false;
}
return true;
@@ -162,14 +169,16 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st
const struct drm_connector_state *conn_state)
{
struct intel_connector *connector = to_intel_connector(conn_state->connector);
+ struct drm_i915_private *i915 = to_i915(connector->base.dev);
struct intel_dp *intel_dp = intel_attached_dp(connector);
struct intel_panel *panel = &connector->panel;
u8 dpcd_buf, new_dpcd_buf, edp_backlight_mode;
if (drm_dp_dpcd_readb(&intel_dp->aux,
DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf) != 1) {
- DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
- DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
+ drm_dbg_kms(&i915->drm,
+ "Failed to read DPCD register 0x%x\n",
+ DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
return;
}
@@ -186,7 +195,8 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st
if (drm_dp_dpcd_writeb(&intel_dp->aux,
DP_EDP_PWMGEN_BIT_COUNT,
panel->backlight.pwmgen_bit_count) < 0)
- DRM_DEBUG_KMS("Failed to write aux pwmgen bit count\n");
+ drm_dbg_kms(&i915->drm,
+ "Failed to write aux pwmgen bit count\n");
break;
@@ -203,7 +213,8 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st
if (new_dpcd_buf != dpcd_buf) {
if (drm_dp_dpcd_writeb(&intel_dp->aux,
DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf) < 0) {
- DRM_DEBUG_KMS("Failed to write aux backlight mode\n");
+ drm_dbg_kms(&i915->drm,
+ "Failed to write aux backlight mode\n");
}
}
@@ -237,9 +248,11 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
* minimum value will applied automatically. So no need to check that.
*/
freq = i915->vbt.backlight.pwm_freq_hz;
- DRM_DEBUG_KMS("VBT defined backlight frequency %u Hz\n", freq);
+ drm_dbg_kms(&i915->drm, "VBT defined backlight frequency %u Hz\n",
+ freq);
if (!freq) {
- DRM_DEBUG_KMS("Use panel default backlight frequency\n");
+ drm_dbg_kms(&i915->drm,
+ "Use panel default backlight frequency\n");
return max_backlight;
}
@@ -254,12 +267,14 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
*/
if (drm_dp_dpcd_readb(&intel_dp->aux,
DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min) != 1) {
- DRM_DEBUG_KMS("Failed to read pwmgen bit count cap min\n");
+ drm_dbg_kms(&i915->drm,
+ "Failed to read pwmgen bit count cap min\n");
return max_backlight;
}
if (drm_dp_dpcd_readb(&intel_dp->aux,
DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max) != 1) {
- DRM_DEBUG_KMS("Failed to read pwmgen bit count cap max\n");
+ drm_dbg_kms(&i915->drm,
+ "Failed to read pwmgen bit count cap max\n");
return max_backlight;
}
pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
@@ -268,7 +283,8 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) {
- DRM_DEBUG_KMS("VBT defined backlight frequency out of range\n");
+ drm_dbg_kms(&i915->drm,
+ "VBT defined backlight frequency out of range\n");
return max_backlight;
}
@@ -279,10 +295,11 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
break;
}
- DRM_DEBUG_KMS("Using eDP pwmgen bit count of %d\n", pn);
+ drm_dbg_kms(&i915->drm, "Using eDP pwmgen bit count of %d\n", pn);
if (drm_dp_dpcd_writeb(&intel_dp->aux,
DP_EDP_PWMGEN_BIT_COUNT, pn) < 0) {
- DRM_DEBUG_KMS("Failed to write aux pwmgen bit count\n");
+ drm_dbg_kms(&i915->drm,
+ "Failed to write aux pwmgen bit count\n");
return max_backlight;
}
panel->backlight.pwmgen_bit_count = pn;
@@ -319,7 +336,8 @@ intel_dp_aux_display_control_capable(struct intel_connector *connector)
if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP &&
(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP) &&
!(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP)) {
- DRM_DEBUG_KMS("AUX Backlight Control Supported!\n");
+ drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
+ "AUX Backlight Control Supported!\n");
return true;
}
return false;
@@ -328,8 +346,8 @@ intel_dp_aux_display_control_capable(struct intel_connector *connector)
int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
{
struct intel_panel *panel = &intel_connector->panel;
- enum intel_backlight_type type =
- to_i915(intel_connector->base.dev)->vbt.backlight.type;
+ struct drm_i915_private *i915 = to_i915(intel_connector->base.dev);
+ enum intel_backlight_type type = i915->vbt.backlight.type;
if (i915_modparams.enable_dpcd_backlight == 0 ||
(i915_modparams.enable_dpcd_backlight == -1 &&
@@ -337,7 +355,7 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
return -ENODEV;
if (type != INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE)
- DRM_DEBUG_DRIVER("Ignoring VBT backlight type\n");
+ drm_dbg(&i915->drm, "Ignoring VBT backlight type\n");
panel->backlight.setup = intel_dp_aux_setup_backlight;
panel->backlight.enable = intel_dp_aux_enable_backlight;
--
2.25.0
Powered by blists - more mailing lists