[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200206192352.19939-1-f.fainelli@gmail.com>
Date: Thu, 6 Feb 2020 11:23:52 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: netdev@...r.kernel.org
Cc: Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
"David S. Miller" <davem@...emloft.net>,
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH net] net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP port
The 7445 switch clocking profiles do not allow us to run the IMP port at
2Gb/sec in a way that it is reliable and consistent. Make sure that the
setting is only applied to the 7278 family.
Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec")
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
drivers/net/dsa/bcm_sf2.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 3e8635311d0d..d1955543acd1 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -68,7 +68,9 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
/* Force link status for IMP port */
reg = core_readl(priv, offset);
- reg |= (MII_SW_OR | LINK_STS | GMII_SPEED_UP_2G);
+ reg |= (MII_SW_OR | LINK_STS);
+ if (priv->type == BCM7278_DEVICE_ID)
+ reg |= GMII_SPEED_UP_2G;
core_writel(priv, reg, offset);
/* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
--
2.17.1
Powered by blists - more mailing lists