[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200206191314.GA19759@bogus>
Date: Thu, 6 Feb 2020 19:13:14 +0000
From: Rob Herring <robh@...nel.org>
To: Harigovindan P <harigovi@...eaurora.org>
Cc: dri-devel@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org,
freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, robdclark@...il.com,
seanpaul@...omium.org, hoegsberg@...omium.org,
kalyan_t@...eaurora.org, nganji@...eaurora.org
Subject: Re: [v1] dt-bindings: msm:disp: update dsi and dpu bindings
On Tue, Feb 04, 2020 at 07:45:37PM +0530, Harigovindan P wrote:
> Updating bindings of dsi and dpu by adding and removing certain
> properties.
Yes, the diff tells me that. The commit message should say why.
This change breaks compatibility as well.
>
> Signed-off-by: Harigovindan P <harigovi@...eaurora.org>
> ---
>
> Changes in v1:
> - Adding "ahb" clock as a required property.
> - Adding "bus", "rot", "lut" as optional properties for sc7180 device.
> - Removing properties from dsi bindings that are unused.
> - Removing power-domain property since DSI is the child node of MDSS
> and it will inherit supply from its parent.
>
> Documentation/devicetree/bindings/display/msm/dpu.txt | 7 +++++++
> Documentation/devicetree/bindings/display/msm/dsi.txt | 5 -----
> 2 files changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> index 551ae26..dd58472a 100644
> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> @@ -19,6 +19,7 @@ Required properties:
> The following clocks are required:
> * "iface"
> * "bus"
> + * "ahb"
You can't just add new clocks...
> * "core"
> - interrupts: interrupt signal from MDSS.
> - interrupt-controller: identifies the node as an interrupt controller.
> @@ -50,6 +51,8 @@ Required properties:
> - clock-names: device clock names, must be in same order as clocks property.
> The following clocks are required.
> * "bus"
> + For the device "qcom,sc7180-dpu":
> + * "bus" - is an optional property due to architecture change.
> * "iface"
> * "core"
> * "vsync"
> @@ -70,6 +73,10 @@ Optional properties:
> - assigned-clocks: list of clock specifiers for clocks needing rate assignment
> - assigned-clock-rates: list of clock frequencies sorted in the same order as
> the assigned-clocks property.
> +- For the device "qcom,sc7180-dpu":
> + clock-names: optional device clocks, needed for accessing LUT blocks.
> + * "rot"
> + * "lut"
>
> Example:
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
> index af95586..61d659a 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
> @@ -8,13 +8,10 @@ Required properties:
> - reg-names: The names of register regions. The following regions are required:
> * "dsi_ctrl"
> - interrupts: The interrupt signal from the DSI block.
> -- power-domains: Should be <&mmcc MDSS_GDSC>.
> - clocks: Phandles to device clocks.
> - clock-names: the following clocks are required:
> - * "mdp_core"
> * "iface"
> * "bus"
> - * "core_mmss"
> * "byte"
> * "pixel"
> * "core"
> @@ -156,7 +153,6 @@ Example:
> "core",
> "core_mmss",
> "iface",
> - "mdp_core",
> "pixel";
> clocks =
> <&mmcc MDSS_AXI_CLK>,
> @@ -164,7 +160,6 @@ Example:
> <&mmcc MDSS_ESC0_CLK>,
> <&mmcc MMSS_MISC_AHB_CLK>,
> <&mmcc MDSS_AHB_CLK>,
> - <&mmcc MDSS_MDP_CLK>,
> <&mmcc MDSS_PCLK0_CLK>;
>
> assigned-clocks =
> --
> 2.7.4
>
Powered by blists - more mailing lists