[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200210172059.GH25745@shell.armlinux.org.uk>
Date: Mon, 10 Feb 2020 17:20:59 +0000
From: Russell King - ARM Linux admin <linux@...linux.org.uk>
To: Olof Johansson <olof@...om.net>
Cc: "mark.rutland@....com" <mark.rutland@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
"arnd@...db.de" <arnd@...db.de>,
"m.karthikeyan@...iveil.co.in" <m.karthikeyan@...iveil.co.in>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"Z.q. Hou" <zhiqiang.hou@....com>,
"l.subrahmanya@...iveil.co.in" <l.subrahmanya@...iveil.co.in>,
"will.deacon@....com" <will.deacon@....com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Leo Li <leoyang.li@....com>,
"M.h. Lian" <minghuan.lian@....com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
Xiaowei Bao <xiaowei.bao@....com>,
"catalin.marinas@....com" <catalin.marinas@....com>,
"bhelgaas@...gle.com" <bhelgaas@...gle.com>,
"andrew.murray@....com" <andrew.murray@....com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
Mingkai Hu <mingkai.hu@....com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCHv9 00/12] PCI: Recode Mobiveil driver and add PCIe Gen4
driver for NXP Layerscape SoCs
On Mon, Feb 10, 2020 at 04:15:53PM +0000, Russell King - ARM Linux admin wrote:
> On Mon, Feb 10, 2020 at 04:28:23PM +0100, Olof Johansson wrote:
> > On Mon, Feb 10, 2020 at 4:23 PM Russell King - ARM Linux admin
> > <linux@...linux.org.uk> wrote:
> > >
> > > On Mon, Feb 10, 2020 at 04:12:30PM +0100, Olof Johansson wrote:
> > > > On Thu, Feb 6, 2020 at 11:57 AM Z.q. Hou <zhiqiang.hou@....com> wrote:
> > > > >
> > > > > Hi Olof,
> > > > >
> > > > > Thanks a lot for your comments!
> > > > > And sorry for my delay respond!
> > > >
> > > > Actually, they apply with only minor conflicts on top of current -next.
> > > >
> > > > Bjorn, any chance we can get you to pick these up pretty soon? They
> > > > enable full use of a promising ARM developer system, the SolidRun
> > > > HoneyComb, and would be quite valuable for me and others to be able to
> > > > use with mainline or -next without any additional patches applied --
> > > > which this patchset achieves.
> > > >
> > > > I know there are pending revisions based on feedback. I'll leave it up
> > > > to you and others to determine if that can be done with incremental
> > > > patches on top, or if it should be fixed before the initial patchset
> > > > is applied. But all in all, it's holding up adaption by me and surely
> > > > others of a very interesting platform -- I'm looking to replace my
> > > > aging MacchiatoBin with one of these and would need PCIe/NVMe to work
> > > > before I do.
> > >
> > > If you're going to be using NVMe, make sure you use a power-fail safe
> > > version; I've already had one instance where ext4 failed to mount
> > > because of a corrupted journal using an XPG SX8200 after the Honeycomb
> > > Serror'd, and then I powered it down after a few hours before later
> > > booting it back up.
> > >
> > > EXT4-fs (nvme0n1p2): INFO: recovery required on readonly filesystem
> > > EXT4-fs (nvme0n1p2): write access will be enabled during recovery
> > > JBD2: journal transaction 80849 on nvme0n1p2-8 is corrupt.
> > > EXT4-fs (nvme0n1p2): error loading journal
> >
> > Hmm, using btrfs on mine, not sure if the exposure is similar or not.
>
> As I understand the problem, it isn't a filesystem issue. It's a data
> integrity issue with the NVMe over power fail, how they cache the data,
> and ultimately write it to the nand flash.
>
> Have a read of:
>
> https://www.kingston.com/en/solutions/servers-data-centers/ssd-power-loss-protection
This was the link I was actually looking for:
http://industrial.adata.com/en/technology/92
but there's also:
http://industrial.adata.com/en/technology/26
ADATA make the XPG SX8200:
NVME Identify Controller:
vid : 0x1cc1
ssvid : 0x1cc1
mn : ADATA SX8200PNP
fr : R0906I
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up
Powered by blists - more mailing lists