[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a2a738c1-4080-be91-a8bf-3aebe20b27f7@st.com>
Date: Tue, 11 Feb 2020 15:24:19 +0000
From: Olivier MOYSAN <olivier.moysan@...com>
To: Jonathan Cameron <jic23@...nel.org>
CC: "robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"knaack.h@....de" <knaack.h@....de>,
"lars@...afoo.de" <lars@...afoo.de>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"pmeerw@...erw.net" <pmeerw@...erw.net>,
"linux-stm32@...md-mailman.stormreply.com"
<linux-stm32@...md-mailman.stormreply.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 1/4] dt-bindings: iio: adc: sd modulator: add vref support
On 2/8/20 5:04 PM, Jonathan Cameron wrote:
> On Tue, 4 Feb 2020 11:10:05 +0100
> Olivier Moysan <olivier.moysan@...com> wrote:
>
>> Add vref supply support to sigma delta modulator.
>>
>> Signed-off-by: Olivier Moysan <olivier.moysan@...com>
>> ---
>> .../devicetree/bindings/iio/adc/sigma-delta-modulator.yaml | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
>> index a390343d0c2a..2afe0765e971 100644
>> --- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
>> +++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
>> @@ -8,6 +8,7 @@ title: Device-Tree bindings for sigma delta modulator
>>
>> maintainers:
>> - Arnaud Pouliquen <arnaud.pouliquen@...com>
>> + - Olivier Moysan <olivier.moysan@...com>
>>
>> properties:
>> compatible:
>> @@ -21,6 +22,9 @@ properties:
>> '#io-channel-cells':
>> const: 0
>>
>> + vref-supply:
>> + description: Phandle to the vref input analog reference voltage.
> I note this in review of patch 2 but in general I'm not sure we should
> be introducing this for generic devices. It's fine if we have an
> explicit compatible but there is no reason to assume a generic sd-modulator
> uses an external reference.
>
> Jonathan
Ok, I will remove reference to external voltage for generic
sd-modulator, in v2.
I will add it for ads1201 compatible, instead.
Thanks for your review
Olivier
>> +
>> required:
>> - compatible
>> - '#io-channel-cells'
Powered by blists - more mailing lists