| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 12 Feb 2020 12:16:33 -0800
From: Matthias Kaehlcke <mka@...omium.org>
To: Sandeep Maheswaram <sanm@...eaurora.org>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Kishon Vijay Abraham I <kishon@...com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Stephen Boyd <swboyd@...omium.org>,
Doug Anderson <dianders@...omium.org>,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, Manu Gautam <mgautam@...eaurora.org>
Subject: Re: [PATCH v3 1/4] dt-bindings: phy: qcom,qmp: Convert QMP phy
bindings to yaml
Hi Sandeep,
On Wed, Feb 12, 2020 at 04:51:25PM +0530, Sandeep Maheswaram wrote:
> Convert QMP phy bindings to DT schema format using json-schema.
nit: s/phy bindings/PHY bindings/
> Signed-off-by: Sandeep Maheswaram <sanm@...eaurora.org>
> ---
> .../devicetree/bindings/phy/qcom,qmp-phy.yaml | 283 +++++++++++++++++++++
> .../devicetree/bindings/phy/qcom-qmp-phy.txt | 227 -----------------
> 2 files changed, 283 insertions(+), 227 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> new file mode 100644
> index 0000000..b39a594
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> @@ -0,0 +1,283 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm QMP PHY controller
> +
> +maintainers:
> + - Manu Gautam <mgautam@...eaurora.org>
> +
> +description:
> + QMP phy controller supports physical layer functionality for a number of
> + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,ipq8074-qmp-pcie-phy
> + - qcom,msm8996-qmp-pcie-phy
> + - qcom,msm8996-qmp-usb3-phy
> + - qcom,msm8998-qmp-usb3-phy
> + - qcom,msm8998-qmp-ufs-phy
> + - qcom,msm8998-qmp-pcie-phy
> + - qcom,sdm845-qmp-usb3-phy
> + - qcom,sdm845-qmp-usb3-uni-phy
> + - qcom,sdm845-qmp-ufs-phy
> + - qcom,sm8150-qmp-ufs-phy
nit: sort in alphabetical order (i.e. -pcie, -ufs, -usb3)?
> +
> + reg:
> + minItems: 1
> + items:
> + - description: Address and length of PHY's common serdes block.
> + - description: Address and length of the DP_COM control block.
> +
> + reg-names:
> + items:
> + - const: reg-base
> + - const: dp_com
> +
> + "#clock-cells":
> + enum: [ 1, 2 ]
> +
> + "#address-cells":
> + enum: [ 1, 2 ]
> +
> + "#size-cells":
> + enum: [ 1, 2 ]
> +
> + clocks:
> + maxItems: 4
> + minItems: 1
nit: minItems before maxItems, which is the order humans expect, also
it is the prevalent order in other .yaml bindings.
Do we actually need min/maxItems? I would expect the below rules for each
compatible string to take care of it, however I'm not a schema expert.
> +
> + clock-names:
> + maxItems: 4
> + minItems: 1
> + resets:
> + maxItems: 3
> + minItems: 1
> +
> + reset-names:
> + maxItems: 3
> + minItems: 1
> +
> + vdda-phy-supply:
> + description:
> + Phandle to a regulator supply to PHY core block.
> +
> + vdda-pll-supply:
> + description:
> + Phandle to 1.8V regulator supply to PHY refclk pll block.
> +
> + vddp-ref-clk-supply:
> + description:
> + Phandle to a regulator supply to any specific refclk
> + pll block.
> +
> +#Required nodes:
> +patternProperties:
> + "^lanes@[0-9a-f]+$":
> + type: object
> + description:
> + Each device node of QMP phy is required to have as many child nodes as
> + the number of lanes the PHY has.
> +
> +required:
> + - compatible
> + - reg
> + - "#clock-cells"
> + - "#address-cells"
> + - "#size-cells"
> + - clocks
> + - clock-names
> + - resets
> + - reset-names
> + - vdda-phy-supply
> + - vdda-pll-supply
> +
> +additionalProperties: false
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
fix indentation (2 blanks, not 3)
> + - qcom,sdm845-qmp-usb3-phy
> + - qcom,sdm845-qmp-usb3-uni-phy
> + then:
> + properties:
> + clocks:
> + items:
> + - description: Phy aux clock.
> + - description: Phy config clock.
> + - description: 19.2 MHz ref clk.
> + - description: Phy common block aux clock.
> + clock-names:
> + items:
> + - const: aux
> + - const: cfg_ahb
> + - const: ref
> + - const: com_aux
> + resets:
> + items:
> + - description: reset of phy block.
> + - description: phy common block reset.
> + reset-names:
> + items:
> + - const: phy
> + - const: common
fix indentation (3 -> 2)
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
fix indentation (3 -> 2)
> + - qcom,msm8996-qmp-pcie-phy
> + then:
> + properties:
> + clocks:
> + items:
> + - description: Phy aux clock.
> + - description: Phy config clock.
> + - description: 19.2 MHz ref clk.
> +
nit: remove empty line or add it everywhere.
> + clock-names:
> + items:
> + - const: aux
> + - const: cfg_ahb
> + - const: ref
> + resets:
> + items:
> + - description: reset of phy block.
> + - description: phy common block reset.
> + - description: phy's ahb cfg block reset.
> + reset-names:
> + items:
> + - const: phy
> + - const: common
> + - const: cfg
fix indentation (3 -> 2)
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
fix indentation (3 -> 2)
> + - qcom,msm8996-qmp-pcie-phy
> + - qcom,msm8996-qmp-usb3-phy
> + - qcom,msm8998-qmp-pcie-phy
> + - qcom,msm8998-qmp-usb3-phy
> + then:
> + properties:
> + clocks:
> + items:
> + - description: Phy aux clock.
> + - description: Phy config clock.
> + - description: 19.2 MHz ref clk.
> + clock-names:
> + items:
> + - const: aux
> + - const: cfg_ahb
> + - const: ref
> + resets:
> + items:
> + - description: reset of phy block.
> + - description: phy common block reset.
> + reset-names:
> + items:
> + - const: phy
> + - const: common
According to the .txt binding this is not correct for
'qcom,msm8996-qmp-pcie-phy':
For "qcom,msm8996-qmp-pcie-phy" must contain:
"phy", "common", "cfg".
This also matches the actual use in arch/arm64/boot/dts/qcom/msm8996.dtsi
Also the indentation needs to be fixed (3 -> 2)
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
fix indentation (3 -> 2)
> + - qcom,msm8998-qmp-ufs-phy
> + - qcom,sdm845-qmp-ufs-phy
> + - qcom,sm8150-qmp-ufs-phy
> + then:
> + properties:
> + clocks:
> + items:
> + - description: 19.2 MHz ref clk.
> + - description: Phy reference aux clock.
> + clock-names:
> + items:
> + - const: ref
> + - const: ref_aux
> + resets:
> + items:
> + - description: PHY reset in the UFS controller.
> + reset-names:
> + items:
> + - const: ufsphy
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
fix indentation (3 -> 2)
Thanks
Matthias
Powered by blists - more mailing lists