[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1jo8txzm9z.fsf@starbuckisacylon.baylibre.com>
Date: Mon, 17 Feb 2020 08:49:12 +0100
From: Jerome Brunet <jbrunet@...libre.com>
To: Anand Moon <linux.amoon@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Neil Armstrong <narmstrong@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>
Cc: Kevin Hilman <khilman@...libre.com>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org
Subject: Re: [PATCHv1 2/3] arm64: dts: meson: Add missing regulator linked to VCCV5 regulator to VDDIO_C/TF_IO
On Sun 16 Feb 2020 at 18:34, Anand Moon <linux.amoon@...il.com> wrote:
> As per schematics add missing VCCV5 power supply to VDDIO_C/TF_IO
> regulator. Also add TF_3V3N_1V8_EN signal name to gpio pin.
Why ? I don't see the connection with the cover letter here ...
>
> Fixes: c35f6dc5c377 (arm64: dts: meson: Add minimal support for Odroid-N2)
> Cc: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
> Cc: Jerome Brunet <jbrunet@...libre.com>
> Cc: Neil Armstrong <narmstrong@...libre.com>
> Reviewed-by: Neil Armstrong <narmstrong@...libre.com>
> Signed-off-by: Anand Moon <linux.amoon@...il.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> index 353db3b32cc4..23eddff85fe5 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> @@ -66,11 +66,14 @@ tf_io: gpio-regulator-tf_io {
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <3300000>;
>
> + /* TF_3V3N_1V8_EN */
This is not terribly useful ... same for the previous patch
> gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
> gpios-states = <0>;
>
> states = <3300000 0>,
> <1800000 1>;
> + /* U16 RT9179GB */
> + vin-supply = <&vcc_5v>;
That is not parsed and not even part of the gpio regulator binding
documentation. It won't make any difference.
> };
>
> flash_1v8: regulator-flash_1v8 {
Powered by blists - more mailing lists