| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1582097265-20170-1-git-send-email-peng.fan@nxp.com>
Date: Wed, 19 Feb 2020 15:27:36 +0800
From: peng.fan@....com
To: ohad@...ery.com, bjorn.andersson@...aro.org, robh+dt@...nel.org,
shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
festevam@...il.com
Cc: linux-imx@....com, linux-remoteproc@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, Peng Fan <peng.fan@....com>
Subject: [PATCH 0/9] remoteproc: imx_rproc: support i.MX8/8M/7ULP
From: Peng Fan <peng.fan@....com>
This patchset aim to replace NXP vendor imx_rpmsg.c driver.
This patchset is tested with Loic PALLARDY's patch
"remoteproc: add support for co-processor loaded and booted before kernel"
https://patchwork.kernel.org/patch/11265869/,
and inspried from st's remoteproc early boot support.
Since Loic's patch is still under review, just expect your comments :)
Patch [1,2]/9: dt-bindings convert to json and new SoC support
Patch 3/9: skip firmware load when recovery. To i.MX8, firmware is not
handled by Linux.
Patch [4-9]/9: i.MX specific part to support rpmsg/virtio with mbox.
because NXP release image not have resoure table, so add resource
table in dts
My test dts diff for i.MX8QXP MEK, but I have tested this patchset
for i.MX8QXP MEK, i.MX8MM EVK, i.MX7ULP EVK:
+
+ imx8x-cm4 {
+ compatible = "fsl,imx8qxp-cm4";
+ rsrc-table = <
+ 0x1 0x2 0x0 0x0 0x18 0x5c
+ 3
+ /*fw_rsc_vdev*/
+ 7 0 1 0 0 0x200
+ /*fw_rsc_vdev_vring*/
+ 0x90000000 4096 256 1 0
+ 0x90008000 4096 256 2 0
+ 3
+ /*fw_rsc_vdev*/
+ 7 1 1 0 0 0x200
+ /*fw_rsc_vdev_vring*/
+ 0x90010000 4096 256 1 0
+ 0x90018000 4096 256 2 0
+ >;
+ early-booted;
+ mbox-names = "tx", "rx", "rxdb";
+ mboxes = <&lsio_mu5 0 1
+ &lsio_mu5 1 1
+ &lsio_mu5 3 1>;
+ mub-partition = <3>;
+ memory-region = <&vdev0vring0>, <&vdev0vring1>, <&vdev0buffer>,
+ <&vdev1vring0>, <&vdev1vring1>, <&vdev0buffer>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ vdev0vring0: vdev0vring0@...00000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x90000000 0 0x8000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@...08000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x90008000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring0: vdev1vring0@...10000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x90010000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring1: vdev1vring1@...18000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x90018000 0 0x8000>;
+ no-map;
+ };
+
+ vdev0buffer: vdev0buffer {
+ compatible = "shared-dma-pool";
+ reg = <0 0x90400000 0 0x100000>;
+ no-map;
+ };
+ };
+
Peng Fan (9):
dt-bindings: remoteproc: Convert imx-rproc to json-schema
dt-bindings: remoteproc: imx-rproc: support i.MX[8,8M,7ULP]
remoteproc: add support to skip firmware load when recovery
remoteproc: imx_rproc: surport early booted remote processor
remoteproc: imx_rproc: parse early-booted property
remoteproc: imx_proc: enable virtio/mailbox
remoteproc: imx_rproc: add i.MX8QM/QXP
remoteproc: imx_rproc: support i.MX7ULP
remoteproc: imx_rproc: add i.MX8MM support
.../devicetree/bindings/remoteproc/imx-rproc.txt | 33 --
.../devicetree/bindings/remoteproc/imx-rproc.yaml | 95 +++++
drivers/remoteproc/imx_rproc.c | 455 +++++++++++++++++++--
drivers/remoteproc/remoteproc_core.c | 19 +-
include/linux/remoteproc.h | 1 +
5 files changed, 531 insertions(+), 72 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/remoteproc/imx-rproc.txt
create mode 100644 Documentation/devicetree/bindings/remoteproc/imx-rproc.yaml
--
2.16.4
Powered by blists - more mailing lists