| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 24 Feb 2020 17:54:17 +0100
From: Ondrej Jirman <megous@...ous.com>
To: linux-sunxi@...glegroups.com
Cc: Ondrej Jirman <megous@...ous.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Maxime Ripard <mripard@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS),
linux-arm-kernel@...ts.infradead.org (moderated list:ARM/Allwinner
sunXi SoC support), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v2] ARM: dts: sun8i-a83t: Add thermal trip points/cooling maps
This enables passive cooling by down-regulating CPU voltage
and frequency.
For the trip points, I used values from the BSP code directly.
The critical trip point value is 30°C above the maximum recommended
ambient temperature (70°C) for the SoC from the datasheet, so there's
some headroom even at such a high ambient temperature.
Signed-off-by: Ondrej Jirman <megous@...ous.com>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 60 +++++++++++++++++++++++++++----
1 file changed, 54 insertions(+), 6 deletions(-)
v2:
- added more detail to the commit description
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 74ac7ee9383cf..53c2b6a836f27 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -72,7 +72,7 @@ cpu0: cpu@0 {
#cooling-cells = <2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
clocks = <&ccu CLK_C0CPUX>;
@@ -83,7 +83,7 @@ cpu@1 {
#cooling-cells = <2>;
};
- cpu@2 {
+ cpu2: cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
clocks = <&ccu CLK_C0CPUX>;
@@ -94,7 +94,7 @@ cpu@2 {
#cooling-cells = <2>;
};
- cpu@3 {
+ cpu3: cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
clocks = <&ccu CLK_C0CPUX>;
@@ -116,7 +116,7 @@ cpu100: cpu@100 {
#cooling-cells = <2>;
};
- cpu@101 {
+ cpu101: cpu@101 {
compatible = "arm,cortex-a7";
device_type = "cpu";
clocks = <&ccu CLK_C1CPUX>;
@@ -127,7 +127,7 @@ cpu@101 {
#cooling-cells = <2>;
};
- cpu@102 {
+ cpu102: cpu@102 {
compatible = "arm,cortex-a7";
device_type = "cpu";
clocks = <&ccu CLK_C1CPUX>;
@@ -138,7 +138,7 @@ cpu@102 {
#cooling-cells = <2>;
};
- cpu@103 {
+ cpu103: cpu@103 {
compatible = "arm,cortex-a7";
device_type = "cpu";
clocks = <&ccu CLK_C1CPUX>;
@@ -1188,12 +1188,60 @@ cpu0_thermal: cpu0-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&ths 0>;
+
+ trips {
+ cpu0_hot: cpu-hot {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_very_hot: cpu-very-hot {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ cpu-hot-limit {
+ trip = <&cpu0_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu1_thermal: cpu1-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&ths 1>;
+
+ trips {
+ cpu1_hot: cpu-hot {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_very_hot: cpu-very-hot {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ cpu-hot-limit {
+ trip = <&cpu1_hot>;
+ cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
gpu_thermal: gpu-thermal {
--
2.25.1
Powered by blists - more mailing lists