linux-kernel - Re: [RFC PATCH v1 3/3] dt-bindings: thermal: Add yaml bindings for thermal zones

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200224184003.GA3607@bogus>
Date:   Mon, 24 Feb 2020 12:40:03 -0600
From:   Rob Herring <robh@...nel.org>
To:     Amit Kucheria <amit.kucheria@...aro.org>
Cc:     linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        swboyd@...omium.org, mka@...omium.org, daniel.lezcano@...aro.org,
        Amit Kucheria <amit.kucheria@...durent.com>,
        Zhang Rui <rui.zhang@...el.com>, linux-pm@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: Re: [RFC PATCH v1 3/3] dt-bindings: thermal: Add yaml bindings for
 thermal zones

On Mon, 24 Feb 2020 12:55:37 +0530, Amit Kucheria wrote:
> As part of moving the thermal bindings to YAML, split it up into 3
> bindings: thermal sensors, cooling devices and thermal zones.
> 
> The thermal-zone binding is a software abstraction to capture the
> properties of each zone - how often they should be checked, the
> temperature thresholds (trips) at which mitigation actions need to be
> taken and the level of mitigation needed at those thresholds.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
> ---
>  .../bindings/thermal/thermal-zones.yaml       | 302 ++++++++++++++++++
>  1 file changed, 302 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/thermal-zones.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-zones.example.dt.yaml: thermal-sensor@...3000: interrupt-names: ['uplow'] is too short
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-zones.example.dt.yaml: thermal-sensor@...3000: interrupts: [[0, 506, 4]] is too short
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-zones.example.dt.yaml: thermal-sensor@...5000: interrupt-names: ['uplow'] is too short
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-zones.example.dt.yaml: thermal-sensor@...5000: interrupts: [[0, 507, 4]] is too short

See https://patchwork.ozlabs.org/patch/1242847
Please check and re-submit.