| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 24 Feb 2020 15:54:25 -0600
From: Rob Herring <robh@...nel.org>
To: Amit Kucheria <amit.kucheria@...aro.org>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
Stephen Boyd <swboyd@...omium.org>,
Matthias Kaehlcke <mka@...omium.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Amit Kucheria <amit.kucheria@...durent.com>,
Zhang Rui <rui.zhang@...el.com>,
"open list:THERMAL" <linux-pm@...r.kernel.org>,
devicetree@...r.kernel.org
Subject: Re: [RFC PATCH v1 3/3] dt-bindings: thermal: Add yaml bindings for
thermal zones
On Mon, Feb 24, 2020 at 1:26 AM Amit Kucheria <amit.kucheria@...aro.org> wrote:
>
> As part of moving the thermal bindings to YAML, split it up into 3
> bindings: thermal sensors, cooling devices and thermal zones.
>
> The thermal-zone binding is a software abstraction to capture the
> properties of each zone - how often they should be checked, the
> temperature thresholds (trips) at which mitigation actions need to be
> taken and the level of mitigation needed at those thresholds.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
> ---
> .../bindings/thermal/thermal-zones.yaml | 302 ++++++++++++++++++
> 1 file changed, 302 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/thermal-zones.yaml
>
> diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
> new file mode 100644
> index 000000000000..bc1ce8e41324
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
> @@ -0,0 +1,302 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR MIT)
Why MIT instead of BSD-2-Clause? And do you have rights to add that?
Any text you copied over from the .txt file was only GPL2. Relicensing
would be nice if you can get permission from the authors.
> +# Copyright 2020 Linaro Ltd.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
> +$schema: http://devicetree.org/meta-schemas/base.yaml#
> +
> +title: Thermal zone binding
> +
> +maintainers:
> + - Amit Kucheria <amitk@...nel.org>
> +
> +description: |
> + Thermal management is achieved in devicetree by describing the sensor hardware
> + and the software abstraction of cooling devices and thermal zones required to
> + take appropriate action to mitigate thermal overloads.
> +
> + The following node types are used to completely describe a thermal management
> + system in devicetree:
> + - thermal-sensor: device that measures temperature, has SoC-specific bindings
> + - cooling-device: device used to dissipate heat either passively or artively
typo
> + - thermal-zones: a container of the following node types used to describe all
> + thermal data for the platform
> +
> + This binding describes the thermal-zones.
> +
> + The polling-delay properties of a thermal-zone are bound to the maximum dT/dt
> + (temperature derivative over time) in two situations for a thermal zone:
> + 1. when passive cooling is activated (polling-delay-passive)
> + 2. when the zone just needs to be monitored (polling-delay) or when
> + active cooling is activated.
> +
> + The maximum dT/dt is highly bound to hardware power consumption and
> + dissipation capability. The delays should be chosen to account for said
> + max dT/dt, such that a device does not cross several trip boundaries
> + unexpectedly between polls. Choosing the right polling delays shall avoid
> + having the device in temperature ranges that may damage the silicon structures
> + and reduce silicon lifetime.
> +
> +properties:
> + thermal-zones:
> + type: object
> + description:
> + A /thermal-zones node is required in order to use the thermal framework to
> + manage input from the various thermal zones in the system in order to
> + mitigate thermal overload conditions. It does not represent a real device
> + in the system, but acts as a container to link thermal sensor devices,
> + platform-data regarding temperature thresholds and the mitigation actions
> + to take when the temperature crosses those thresholds.
> +
> + properties:
> + $nodename:
> + pattern: "^[a-zA-Z][a-zA-Z0-9,\\-]{1,12}-thermal$"
> + type: object
> + description:
> + Each thermal zone node contains information about how frequently it
> + must be checked, the sensor responsible for reporting temperature for
> + this zone, one sub-node containing the various trip points for this
> + zone and one sub-node containing all the zone cooling-maps.
> +
> + properties:
> + polling-delay:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + description:
> + The maximum number of milliseconds to wait between polls when
> + checking this thermal zone. Setting this to 0 disables the polling
> + timers setup by the thermal framework and assumes that the thermal
> + sensors in this zone support interrupts.
> +
> + polling-delay-passive:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + description:
> + The maximum number of milliseconds to wait between polls when
> + checking this thermal zone while doing passive cooling. Setting
> + this to 0 disables the polling timers setup by the thermal
> + framework and assumes that the thermal sensors in this zone
> + support interrupts.
> +
> + thermal-sensors:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + A list of thermal sensor phandles and sensor specifiers used to
> + monitor this thermal zone.
> +
> + trips:
> + type: object
> + description:
> + This node describes a set of points in the temperature domain at
> + which the thermal framework needs to takes action. The actions to
> + be taken are defined in another node called cooling-maps.
> +
> + patternProperties:
> + "^[a-zA-Z][a-zA-Z0-9,+\\._]{0,63}$":
> + type: object
> +
> + properties:
> + temperature:
> + $ref: /schemas/types.yaml#/definitions/int32
> + description:
> + An integer expressing the trip temperature in millicelsius.
Wouldn't 200000 mC be a reasonable max? And -273000 mC min.
> +
> + hysteresis:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + An unsigned integer expressing the hysteresis delta with
> + respect to the trip temperature property above, also in
> + millicelsius.
> +
> + type:
> + oneOf:
> + - items:
> + - enum:
Drop oneOf and items. Just enum is enough.
> + - active
> + - passive
> + - hot
> + - critical
> + description: |
> + There are four valid trip types,
> + - active - enable active cooling e.g. fans
> + - passive - enable passive cooling e.g. throttling cpu
> + - hot - send notification to driver if .notify
> + callback registered
> + - critical - send notification to driver if .notify
> + callback registered and trigger a shutdown
Perhaps make these comments on each enum entry.
> +
> + required:
> + - temperature
> + - hysteresis
> + - type
'additionalProperties: false'? Or can the node have other properties?
> +
> + cooling-maps:
> + type: object
> + description:
> + This node describes the action to be taken when a thermal zone
> + crosses one of the temperature thresholds described in the trips
> + node. The action takes the form of a mapping relation between a
> + trip and the target cooling device state.
> +
> + patternProperties:
> + "^map[0-9][-a-zA-Z0-9]*$":
> + type: object
> +
> + properties:
> + trip:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + A phandle of a trip point node within this thermal zone.
> +
> + cooling-device:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + A list of cooling device phandles along with the minimum
> + and maximum cooling state specifiers for each cooling
> + device. Using the THERMAL_NO_LIMIT (-1UL) constant in the
> + cooling-device phandle limit specifier lets the framework
> + use the minimum and maximum cooling state for that cooling
> + device automatically.
> +
> + contribution:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 100
> + description:
> + The contribution of the cooling devices at the trip
> + temperature, both referenced in this map, to this thermal
> + zone as a percentage.
> +
> + required:
> + - trip
> + - cooling-device
'additionalProperties: false'?
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/thermal/thermal.h>
> +
> + // Example 1: SDM845 TSENS
> + soc: soc@0 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + /* ... */
> +
> + tsens0: thermal-sensor@...3000 {
> + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> + reg = <0 0x0c263000 0 0x1ff>, /* TM */
> + <0 0x0c222000 0 0x1ff>; /* SROT */
> + #qcom,sensors = <13>;
> + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uplow";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens1: thermal-sensor@...5000 {
> + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> + reg = <0 0x0c265000 0 0x1ff>, /* TM */
> + <0 0x0c223000 0 0x1ff>; /* SROT */
> + #qcom,sensors = <8>;
> + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uplow";
> + #thermal-sensor-cells = <1>;
> + };
> + };
> +
> + /* ... */
> +
> + thermal-zones {
> + cpu0-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 1>;
> +
> + trips {
> + cpu0_alert0: trip-point0 {
> + temperature = <90000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu0_alert1: trip-point1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu0_crit: cpu_crit {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu0_alert0>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT
> + THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT
> + THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT
> + THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT
> + THERMAL_NO_LIMIT>;
> + };
> +
> + map1 {
> + trip = <&cpu0_alert1>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT
> + THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT
> + THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT
> + THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT
> + THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> +
> + /* ... */
> +
> + cluster0-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 5>;
> +
> + trips {
> + cluster0_alert0: trip-point0 {
> + temperature = <90000>;
> + hysteresis = <2000>;
> + type = "hot";
> + };
> + cluster0_crit: cluster0_crit {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + /* ... */
> +
> + gpu-thermal-top {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 11>;
> +
> + trips {
> + gpu1_alert0: trip-point0 {
> + temperature = <90000>;
> + hysteresis = <2000>;
> + type = "hot";
> + };
> + };
> + };
> + };
> +...
> --
> 2.20.1
>
Powered by blists - more mailing lists