| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <202002251803.taTZxoDE%lkp@intel.com>
Date: Tue, 25 Feb 2020 18:47:03 +0800
From: kbuild test robot <lkp@...el.com>
To: Heiner Kallweit <hkallweit1@...il.com>
Cc: kbuild-all@...ts.01.org,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
alsa-devel@...a-project.org
Subject: Re: [PATCH v2 7/8] PCI: pci-bridge-emul: use PCI_STATUS_ERROR_BITS
Hi Heiner,
I love your patch! Yet something to improve:
[auto build test ERROR on pci/next]
[also build test ERROR on sound/for-next net-next/master net/master linus/master v5.6-rc3 next-20200224]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
url: https://github.com/0day-ci/linux/commits/Heiner-Kallweit/PCI-add-and-use-constant-PCI_STATUS_ERROR_BITS-and-helper-pci_status_get_and_clear_errors/20200225-154725
base: https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git next
config: arm-mvebu_v7_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (GCC) 7.5.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=7.5.0 make.cross ARCH=arm
If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@...el.com>
All errors (new ones prefixed by >>):
>> drivers//pci/pci-bridge-emul.c:53:37: error: expected '}' before ';' token
.w1c = PCI_STATUS_ERROR_BITS << 16;
^
drivers//pci/pci-bridge-emul.c:98:37: error: expected '}' before ';' token
.w1c = PCI_STATUS_ERROR_BITS << 16;
^
vim +53 drivers//pci/pci-bridge-emul.c
40
41 static const struct pci_bridge_reg_behavior pci_regs_behavior[] = {
42 [PCI_VENDOR_ID / 4] = { .ro = ~0 },
43 [PCI_COMMAND / 4] = {
44 .rw = (PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
45 PCI_COMMAND_MASTER | PCI_COMMAND_PARITY |
46 PCI_COMMAND_SERR),
47 .ro = ((PCI_COMMAND_SPECIAL | PCI_COMMAND_INVALIDATE |
48 PCI_COMMAND_VGA_PALETTE | PCI_COMMAND_WAIT |
49 PCI_COMMAND_FAST_BACK) |
50 (PCI_STATUS_CAP_LIST | PCI_STATUS_66MHZ |
51 PCI_STATUS_FAST_BACK | PCI_STATUS_DEVSEL_MASK) << 16),
52 .rsvd = GENMASK(15, 10) | ((BIT(6) | GENMASK(3, 0)) << 16),
> 53 .w1c = PCI_STATUS_ERROR_BITS << 16;
54 },
55 [PCI_CLASS_REVISION / 4] = { .ro = ~0 },
56
57 /*
58 * Cache Line Size register: implement as read-only, we do not
59 * pretend implementing "Memory Write and Invalidate"
60 * transactions"
61 *
62 * Latency Timer Register: implemented as read-only, as "A
63 * bridge that is not capable of a burst transfer of more than
64 * two data phases on its primary interface is permitted to
65 * hardwire the Latency Timer to a value of 16 or less"
66 *
67 * Header Type: always read-only
68 *
69 * BIST register: implemented as read-only, as "A bridge that
70 * does not support BIST must implement this register as a
71 * read-only register that returns 0 when read"
72 */
73 [PCI_CACHE_LINE_SIZE / 4] = { .ro = ~0 },
74
75 /*
76 * Base Address registers not used must be implemented as
77 * read-only registers that return 0 when read.
78 */
79 [PCI_BASE_ADDRESS_0 / 4] = { .ro = ~0 },
80 [PCI_BASE_ADDRESS_1 / 4] = { .ro = ~0 },
81
82 [PCI_PRIMARY_BUS / 4] = {
83 /* Primary, secondary and subordinate bus are RW */
84 .rw = GENMASK(24, 0),
85 /* Secondary latency is read-only */
86 .ro = GENMASK(31, 24),
87 },
88
89 [PCI_IO_BASE / 4] = {
90 /* The high four bits of I/O base/limit are RW */
91 .rw = (GENMASK(15, 12) | GENMASK(7, 4)),
92
93 /* The low four bits of I/O base/limit are RO */
94 .ro = (((PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK |
95 PCI_STATUS_DEVSEL_MASK) << 16) |
96 GENMASK(11, 8) | GENMASK(3, 0)),
97
98 .w1c = PCI_STATUS_ERROR_BITS << 16;
99
100 .rsvd = ((BIT(6) | GENMASK(4, 0)) << 16),
101 },
102
103 [PCI_MEMORY_BASE / 4] = {
104 /* The high 12-bits of mem base/limit are RW */
105 .rw = GENMASK(31, 20) | GENMASK(15, 4),
106
107 /* The low four bits of mem base/limit are RO */
108 .ro = GENMASK(19, 16) | GENMASK(3, 0),
109 },
110
111 [PCI_PREF_MEMORY_BASE / 4] = {
112 /* The high 12-bits of pref mem base/limit are RW */
113 .rw = GENMASK(31, 20) | GENMASK(15, 4),
114
115 /* The low four bits of pref mem base/limit are RO */
116 .ro = GENMASK(19, 16) | GENMASK(3, 0),
117 },
118
119 [PCI_PREF_BASE_UPPER32 / 4] = {
120 .rw = ~0,
121 },
122
123 [PCI_PREF_LIMIT_UPPER32 / 4] = {
124 .rw = ~0,
125 },
126
127 [PCI_IO_BASE_UPPER16 / 4] = {
128 .rw = ~0,
129 },
130
131 [PCI_CAPABILITY_LIST / 4] = {
132 .ro = GENMASK(7, 0),
133 .rsvd = GENMASK(31, 8),
134 },
135
136 [PCI_ROM_ADDRESS1 / 4] = {
137 .rw = GENMASK(31, 11) | BIT(0),
138 .rsvd = GENMASK(10, 1),
139 },
140
141 /*
142 * Interrupt line (bits 7:0) are RW, interrupt pin (bits 15:8)
143 * are RO, and bridge control (31:16) are a mix of RW, RO,
144 * reserved and W1C bits
145 */
146 [PCI_INTERRUPT_LINE / 4] = {
147 /* Interrupt line is RW */
148 .rw = (GENMASK(7, 0) |
149 ((PCI_BRIDGE_CTL_PARITY |
150 PCI_BRIDGE_CTL_SERR |
151 PCI_BRIDGE_CTL_ISA |
152 PCI_BRIDGE_CTL_VGA |
153 PCI_BRIDGE_CTL_MASTER_ABORT |
154 PCI_BRIDGE_CTL_BUS_RESET |
155 BIT(8) | BIT(9) | BIT(11)) << 16)),
156
157 /* Interrupt pin is RO */
158 .ro = (GENMASK(15, 8) | ((PCI_BRIDGE_CTL_FAST_BACK) << 16)),
159
160 .w1c = BIT(10) << 16,
161
162 .rsvd = (GENMASK(15, 12) | BIT(4)) << 16,
163 },
164 };
165
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
Download attachment ".config.gz" of type "application/gzip" (26287 bytes)
Powered by blists - more mailing lists