[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <4f46506e8dc72400a7c7aac0ed275ebd9d097419.1582912972.git.hns@goldelico.com>
Date: Fri, 28 Feb 2020 19:02:52 +0100
From: "H. Nikolaus Schaller" <hns@...delico.com>
To: Paul Boddie <paul@...die.org.uk>,
Paul Cercueil <paul@...pouillou.net>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Ralf Baechle <ralf@...ux-mips.org>,
Paul Burton <paulburton@...nel.org>,
"H. Nikolaus Schaller" <hns@...delico.com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Andi Kleen <ak@...ux.intel.com>,
Kees Cook <keescook@...omium.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
"Eric W. Biederman" <ebiederm@...ssion.com>
Cc: devicetree@...r.kernel.org, linux-mips@...r.kernel.org,
linux-kernel@...r.kernel.org, letux-kernel@...nphoenux.org,
kernel@...a-handheld.com
Subject: [PATCH v4 4/5] MIPS: DTS: CI20: multiple DTS improvements
a) add DT node for SW1 as Enter button
The SW1 button can be used as a simple one-button keyboard
and is connected to PD17.
Note: SW1 has a second meaning to change the boot sequence
when pressed while powering on.
b) give eth0_power a defined voltage.
This is a 3.3V power switch (DVNET3.3V).
Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
---
arch/mips/boot/dts/ingenic/ci20.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 0251ca154ccb..ce6bf7e7dbba 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -4,6 +4,7 @@
#include "jz4780.dtsi"
#include <dt-bindings/clock/ingenic,tcu.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/regulator/active-semi,8865-regulator.h>
@@ -27,6 +28,17 @@
0x30000000 0x30000000>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ sw1 {
+ label = "ci20:sw1";
+ linux,code = <KEY_F13>;
+ gpios = <&gpd 17 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -58,6 +70,8 @@
eth0_power: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "eth0_power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
gpio = <&gpb 25 GPIO_ACTIVE_LOW>;
enable-active-high;
};
--
2.23.0
Powered by blists - more mailing lists