linux-kernel - [PATCH v4 5/5] MIPS: CI20: defconfig: multiple improvements

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <f42513950a007cc0952e810b3412a17ade5c98c9.1582912972.git.hns@goldelico.com>
Date:   Fri, 28 Feb 2020 19:02:53 +0100
From:   "H. Nikolaus Schaller" <hns@...delico.com>
To:     Paul Boddie <paul@...die.org.uk>,
        Paul Cercueil <paul@...pouillou.net>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Ralf Baechle <ralf@...ux-mips.org>,
        Paul Burton <paulburton@...nel.org>,
        "H. Nikolaus Schaller" <hns@...delico.com>,
        Miquel Raynal <miquel.raynal@...tlin.com>,
        Andi Kleen <ak@...ux.intel.com>,
        Kees Cook <keescook@...omium.org>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        Geert Uytterhoeven <geert+renesas@...der.be>,
        "Eric W. Biederman" <ebiederm@...ssion.com>
Cc:     devicetree@...r.kernel.org, linux-mips@...r.kernel.org,
        linux-kernel@...r.kernel.org, letux-kernel@...nphoenux.org,
        kernel@...a-handheld.com
Subject: [PATCH v4 5/5] MIPS: CI20: defconfig: multiple improvements

a) configure for supporting modules

Not all drivers need to be compiled into the kernel.
Support building and loading of kernel modules.

b) compile leds-gpio driver into the kernel and configure for LED triggers

DTS has been augmented to add some gpio-leds. We need the leds-gpio driver
and enable the triggers.

c) configure CONFIG_REGULATOR_ACT8865 for PMU

The PMU on the CI20 board is an ACT8600 using the ACT8865 driver.
Since it is not compiled, the PMU and the CI20 board is running in
power-on reset state of the PMU.

d) compile gpio-ir driver

The CI20 board has a gpio based IR receiver.

e) configure for CONFIG_KEYBOARD_GPIO=m

The SW1 button is hooked up to send input events.

Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
---
 arch/mips/configs/ci20_defconfig | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index be41df2a81fb..0db0088bbc1c 100644
--- a/arch/mips/configs/ci20_defconfig
+++ b/arch/mips/configs/ci20_defconfig
@@ -1,4 +1,5 @@
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_MODULES=y
 CONFIG_KERNEL_XZ=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -88,12 +89,14 @@ CONFIG_I2C_JZ4780=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_KEYBOARD_GPIO=m
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_JZ4740_WDT=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_ACT8865=y
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
@@ -166,3 +169,21 @@ CONFIG_STACKTRACE=y
 # CONFIG_FTRACE is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="earlycon console=ttyS4,115200 clk_ignore_unused"
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_MTD=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_LEDS_TRIGGER_CAMERA=m
+CONFIG_LIRC=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_RC_DEVICES=y
+CONFIG_IR_GPIO_CIR=m
+CONFIG_IR_GPIO_TX=m
-- 
2.23.0