| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1685e79f7b53c70c64e37841fb4df173094ebd17.1583135507.git.mchehab+huawei@kernel.org>
Date: Mon, 2 Mar 2020 08:59:33 +0100
From: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
To: Linux Doc Mailing List <linux-doc@...r.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>,
linux-kernel@...r.kernel.org, Jonathan Corbet <corbet@....net>,
Rob Herring <robh+dt@...nel.org>,
Pantelis Antoniou <pantelis.antoniou@...sulko.com>,
Frank Rowand <frowand.list@...il.com>,
devicetree@...r.kernel.org
Subject: [PATCH v2 08/12] docs: dt: convert overlay-notes.txt to ReST format
- Add a SPDX header;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to devicetree/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
---
Documentation/devicetree/index.rst | 1 +
.../{overlay-notes.txt => overlay-notes.rst} | 141 +++++++++---------
MAINTAINERS | 2 +-
3 files changed, 74 insertions(+), 70 deletions(-)
rename Documentation/devicetree/{overlay-notes.txt => overlay-notes.rst} (56%)
diff --git a/Documentation/devicetree/index.rst b/Documentation/devicetree/index.rst
index ca83258fbba5..0669a53fc617 100644
--- a/Documentation/devicetree/index.rst
+++ b/Documentation/devicetree/index.rst
@@ -13,3 +13,4 @@ Open Firmware and Device Tree
changesets
dynamic-resolution-notes
of_unittest
+ overlay-notes
diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.rst
similarity index 56%
rename from Documentation/devicetree/overlay-notes.txt
rename to Documentation/devicetree/overlay-notes.rst
index 3f20a39e4bc2..7e8e568f64a8 100644
--- a/Documentation/devicetree/overlay-notes.txt
+++ b/Documentation/devicetree/overlay-notes.rst
@@ -1,5 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
Device Tree Overlay Notes
--------------------------
+=========================
This document describes the implementation of the in-kernel
device tree overlay functionality residing in drivers/of/overlay.c and is a
@@ -15,68 +18,68 @@ Since the kernel mainly deals with devices, any new device node that result
in an active device should have it created while if the device node is either
disabled or removed all together, the affected device should be deregistered.
-Lets take an example where we have a foo board with the following base tree:
-
----- foo.dts -----------------------------------------------------------------
- /* FOO platform */
- / {
- compatible = "corp,foo";
-
- /* shared resources */
- res: res {
- };
-
- /* On chip peripherals */
- ocp: ocp {
- /* peripherals that are always instantiated */
- peripheral1 { ... };
- }
- };
----- foo.dts -----------------------------------------------------------------
-
-The overlay bar.dts, when loaded (and resolved as described in [1]) should
-
----- bar.dts -----------------------------------------------------------------
-/plugin/; /* allow undefined label references and record them */
-/ {
- .... /* various properties for loader use; i.e. part id etc. */
- fragment@0 {
- target = <&ocp>;
- __overlay__ {
- /* bar peripheral */
- bar {
- compatible = "corp,bar";
- ... /* various properties and child nodes */
- }
- };
- };
-};
----- bar.dts -----------------------------------------------------------------
-
-result in foo+bar.dts
-
----- foo+bar.dts -------------------------------------------------------------
- /* FOO platform + bar peripheral */
- / {
- compatible = "corp,foo";
-
- /* shared resources */
- res: res {
- };
-
- /* On chip peripherals */
- ocp: ocp {
- /* peripherals that are always instantiated */
- peripheral1 { ... };
-
- /* bar peripheral */
- bar {
- compatible = "corp,bar";
- ... /* various properties and child nodes */
- }
- }
- };
----- foo+bar.dts -------------------------------------------------------------
+Lets take an example where we have a foo board with the following base tree::
+
+ ---- foo.dts --------------------------------------------------------------
+ /* FOO platform */
+ / {
+ compatible = "corp,foo";
+
+ /* shared resources */
+ res: res {
+ };
+
+ /* On chip peripherals */
+ ocp: ocp {
+ /* peripherals that are always instantiated */
+ peripheral1 { ... };
+ }
+ };
+ ---- foo.dts --------------------------------------------------------------
+
+The overlay bar.dts, when loaded (and resolved as described in [1]) should::
+
+ ---- bar.dts --------------------------------------------------------------
+ /plugin/; /* allow undefined label references and record them */
+ / {
+ .... /* various properties for loader use; i.e. part id etc. */
+ fragment@0 {
+ target = <&ocp>;
+ __overlay__ {
+ /* bar peripheral */
+ bar {
+ compatible = "corp,bar";
+ ... /* various properties and child nodes */
+ }
+ };
+ };
+ };
+ ---- bar.dts --------------------------------------------------------------
+
+result in foo+bar.dts::
+
+ ---- foo+bar.dts ----------------------------------------------------------
+ /* FOO platform + bar peripheral */
+ / {
+ compatible = "corp,foo";
+
+ /* shared resources */
+ res: res {
+ };
+
+ /* On chip peripherals */
+ ocp: ocp {
+ /* peripherals that are always instantiated */
+ peripheral1 { ... };
+
+ /* bar peripheral */
+ bar {
+ compatible = "corp,bar";
+ ... /* various properties and child nodes */
+ }
+ }
+ };
+ ---- foo+bar.dts ----------------------------------------------------------
As a result of the overlay, a new device node (bar) has been created
so a bar platform device will be registered and if a matching device driver
@@ -88,11 +91,11 @@ Overlay in-kernel API
The API is quite easy to use.
1. Call of_overlay_fdt_apply() to create and apply an overlay changeset. The
-return value is an error or a cookie identifying this overlay.
+ return value is an error or a cookie identifying this overlay.
2. Call of_overlay_remove() to remove and cleanup the overlay changeset
-previously created via the call to of_overlay_fdt_apply(). Removal of an
-overlay changeset that is stacked by another will not be permitted.
+ previously created via the call to of_overlay_fdt_apply(). Removal of an
+ overlay changeset that is stacked by another will not be permitted.
Finally, if you need to remove all overlays in one-go, just call
of_overlay_remove_all() which will remove every single one in the correct
@@ -109,9 +112,9 @@ respective node it received.
Overlay DTS Format
------------------
-The DTS of an overlay should have the following format:
+The DTS of an overlay should have the following format::
-{
+ {
/* ignored properties by the overlay */
fragment@0 { /* first child node */
@@ -131,7 +134,7 @@ The DTS of an overlay should have the following format:
...
};
/* more fragments follow */
-}
+ }
Using the non-phandle based target method allows one to use a base DT which does
not contain a __symbols__ node, i.e. it was not compiled with the -@ option.
diff --git a/MAINTAINERS b/MAINTAINERS
index 1380b1ed69a2..3f679cb4b330 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12459,7 +12459,7 @@ M: Frank Rowand <frowand.list@...il.com>
L: devicetree@...r.kernel.org
S: Maintained
F: Documentation/devicetree/dynamic-resolution-notes.rst
-F: Documentation/devicetree/overlay-notes.txt
+F: Documentation/devicetree/overlay-notes.rst
F: drivers/of/overlay.c
F: drivers/of/resolver.c
K: of_overlay_notifier_
--
2.21.1
Powered by blists - more mailing lists