| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <0432bc8cdb6abb8618eac89d68db7441b613106d.1583135507.git.mchehab+huawei@kernel.org>
Date: Mon, 2 Mar 2020 08:59:27 +0100
From: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
To: Linux Doc Mailing List <linux-doc@...r.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>,
linux-kernel@...r.kernel.org, Jonathan Corbet <corbet@....net>,
Rob Herring <robh+dt@...nel.org>,
Lee Jones <lee.jones@...aro.org>, devicetree@...r.kernel.org
Subject: [PATCH v2 02/12] docs: dt: convert usage-model.txt to ReST
- Add a SPDX header;
- Adjust document title;
- Use footnoote markups;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to devicetree/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
---
Documentation/devicetree/index.rst | 1 +
Documentation/devicetree/of_unittest.txt | 2 +-
.../{usage-model.txt => usage-model.rst} | 35 +++++++++++--------
include/linux/mfd/core.h | 2 +-
4 files changed, 23 insertions(+), 17 deletions(-)
rename Documentation/devicetree/{usage-model.txt => usage-model.rst} (97%)
diff --git a/Documentation/devicetree/index.rst b/Documentation/devicetree/index.rst
index a11efe26f205..7a6aad7d384a 100644
--- a/Documentation/devicetree/index.rst
+++ b/Documentation/devicetree/index.rst
@@ -7,4 +7,5 @@ Open Firmware and Device Tree
.. toctree::
:maxdepth: 1
+ usage-model
writing-schema
diff --git a/Documentation/devicetree/of_unittest.txt b/Documentation/devicetree/of_unittest.txt
index 3e4e7d48ae93..9fdd2de9b770 100644
--- a/Documentation/devicetree/of_unittest.txt
+++ b/Documentation/devicetree/of_unittest.txt
@@ -11,7 +11,7 @@ architecture.
It is recommended to read the following documents before moving ahead.
-[1] Documentation/devicetree/usage-model.txt
+[1] Documentation/devicetree/usage-model.rst
[2] http://www.devicetree.org/Device_Tree_Usage
OF Selftest has been designed to test the interface (include/linux/of.h)
diff --git a/Documentation/devicetree/usage-model.txt b/Documentation/devicetree/usage-model.rst
similarity index 97%
rename from Documentation/devicetree/usage-model.txt
rename to Documentation/devicetree/usage-model.rst
index 33a8aaac02a8..326d7af10c5b 100644
--- a/Documentation/devicetree/usage-model.txt
+++ b/Documentation/devicetree/usage-model.rst
@@ -1,14 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
Linux and the Device Tree
--------------------------
+=========================
+
The Linux usage model for device tree data
-Author: Grant Likely <grant.likely@...retlab.ca>
+:Author: Grant Likely <grant.likely@...retlab.ca>
This article describes how Linux uses the device tree. An overview of
the device tree data format can be found on the device tree usage page
-at devicetree.org[1].
+at devicetree.org\ [1]_.
-[1] http://devicetree.org/Device_Tree_Usage
+.. [1] http://devicetree.org/Device_Tree_Usage
The "Open Firmware Device Tree", or simply Device Tree (DT), is a data
structure and language for describing hardware. More specifically, it
@@ -57,7 +61,7 @@ Tree (FDT) was created which could be passed to the kernel as a binary
blob without requiring a real Open Firmware implementation. U-Boot,
kexec, and other bootloaders were modified to support both passing a
Device Tree Binary (dtb) and to modify a dtb at boot time. DT was
-also added to the PowerPC boot wrapper (arch/powerpc/boot/*) so that
+also added to the PowerPC boot wrapper (``arch/powerpc/boot/*``) so that
a dtb could be wrapped up with the kernel image to support booting
existing non-DT aware firmware.
@@ -68,7 +72,7 @@ out of mainline (nios) have some level of DT support.
2. Data Model
-------------
-If you haven't already read the Device Tree Usage[1] page,
+If you haven't already read the Device Tree Usage\ [1]_ page,
then go read it now. It's okay, I'll wait....
2.1 High Level View
@@ -88,6 +92,7 @@ duplication and make it easier to support a wide range of hardware
with a single kernel image.
Linux uses DT data for three major purposes:
+
1) platform identification,
2) runtime configuration, and
3) device population.
@@ -117,7 +122,7 @@ The 'compatible' property contains a sorted list of strings starting
with the exact name of the machine, followed by an optional list of
boards it is compatible with sorted from most compatible to least. For
example, the root compatible properties for the TI BeagleBoard and its
-successor, the BeagleBoard xM board might look like, respectively:
+successor, the BeagleBoard xM board might look like, respectively::
compatible = "ti,omap3-beagleboard", "ti,omap3450", "ti,omap3";
compatible = "ti,omap3-beagleboard-xm", "ti,omap3450", "ti,omap3";
@@ -183,7 +188,7 @@ configuration data like the kernel parameters string and the location
of an initrd image.
Most of this data is contained in the /chosen node, and when booting
-Linux it will look something like this:
+Linux it will look something like this::
chosen {
bootargs = "console=ttyS0,115200 loglevel=8";
@@ -251,9 +256,9 @@ platform devices roughly correspond to device nodes at the root of the
tree and children of simple memory mapped bus nodes.
About now is a good time to lay out an example. Here is part of the
-device tree for the NVIDIA Tegra board.
+device tree for the NVIDIA Tegra board::
-/{
+ /{
compatible = "nvidia,harmony", "nvidia,tegra20";
#address-cells = <1>;
#size-cells = <1>;
@@ -313,7 +318,7 @@ device tree for the NVIDIA Tegra board.
i2s-controller = <&i2s1>;
i2s-codec = <&wm8903>;
};
-};
+ };
At .init_machine() time, Tegra board support code will need to look at
this DT and decide which nodes to create platform_devices for.
@@ -379,13 +384,13 @@ device tree support code reflects that and makes the above example
simpler. The second argument to of_platform_populate() is an
of_device_id table, and any node that matches an entry in that table
will also get its child nodes registered. In the Tegra case, the code
-can look something like this:
+can look something like this::
-static void __init harmony_init_machine(void)
-{
+ static void __init harmony_init_machine(void)
+ {
/* ... */
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
+ }
"simple-bus" is defined in the Devicetree Specification as a property
meaning a simple memory mapped bus, so the of_platform_populate() code
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
index d01d1299e49d..21718c8b2b48 100644
--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -74,7 +74,7 @@ struct mfd_cell {
/*
* Device Tree compatible string
- * See: Documentation/devicetree/usage-model.txt Chapter 2.2 for details
+ * See: Documentation/devicetree/usage-model.rst Chapter 2.2 for details
*/
const char *of_compatible;
--
2.21.1
Powered by blists - more mailing lists