| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200302180730.1886678-19-tudor.ambarus@microchip.com>
Date: Mon, 2 Mar 2020 18:07:54 +0000
From: <Tudor.Ambarus@...rochip.com>
To: <bbrezillon@...nel.org>, <vigneshr@...com>,
<linux-mtd@...ts.infradead.org>
CC: <miquel.raynal@...tlin.com>, <richard@....at>, <joel@....id.au>,
<andrew@...id.au>, <Nicolas.Ferre@...rochip.com>,
<alexandre.belloni@...tlin.com>, <Ludovic.Desroches@...rochip.com>,
<matthias.bgg@...il.com>, <vz@...ia.com>,
<michal.simek@...inx.com>, <ludovic.barre@...com>,
<john.garry@...wei.com>, <tglx@...utronix.de>,
<nishkadg.linux@...il.com>, <michael@...le.cc>,
<dinguyen@...nel.org>, <thor.thayer@...ux.intel.com>,
<swboyd@...omium.org>, <opensource@...ayne.com>,
<mika.westerberg@...ux.intel.com>, <kstewart@...uxfoundation.org>,
<allison@...utok.net>, <jethro@...tanix.com>, <info@...ux.net>,
<alexander.sverdlin@...ia.com>, <rfontana@...hat.com>,
<linux-kernel@...r.kernel.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-aspeed@...ts.ozlabs.org>,
<linux-arm-kernel@...ts.infradead.org>,
<Tudor.Ambarus@...rochip.com>
Subject: [PATCH 18/23] mtd: spi-nor: Move Winbond bits out of core.c
From: Boris Brezillon <bbrezillon@...nel.org>
Create a SPI NOR manufacturer driver for Winbond chips, and move the
Winbond definitions outside of core.c.
Signed-off-by: Boris Brezillon <bbrezillon@...nel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
---
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/core.c | 115 +---------------------------------
drivers/mtd/spi-nor/core.h | 1 +
drivers/mtd/spi-nor/winbond.c | 113 +++++++++++++++++++++++++++++++++
4 files changed, 116 insertions(+), 114 deletions(-)
create mode 100644 drivers/mtd/spi-nor/winbond.c
diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index ef7afc654a15..33b6f834a14f 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -13,4 +13,5 @@ spi-nor-objs += macronix.o
spi-nor-objs += micron-st.o
spi-nor-objs += spansion.o
spi-nor-objs += sst.o
+spi-nor-objs += winbond.o
obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 9ff0b09887b4..c99f063b0781 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -487,38 +487,6 @@ int spi_nor_write_ear(struct spi_nor *nor, u8 ear)
return ret;
}
-/**
- * winbond_set_4byte() - Set 4-byte address mode for Winbond flashes.
- * @nor: pointer to 'struct spi_nor'.
- * @enable: true to enter the 4-byte address mode, false to exit the 4-byte
- * address mode.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int winbond_set_4byte(struct spi_nor *nor, bool enable)
-{
- int ret;
-
- ret = spi_nor_en4_ex4_set_4byte(nor, enable);
- if (ret || enable)
- return ret;
-
- /*
- * On Winbond W25Q256FV, leaving 4byte mode causes the Extended Address
- * Register to be set to 1, so all 3-byte-address reads come from the
- * second 16M. We must clear the register to enable normal behavior.
- */
- ret = spi_nor_write_enable(nor);
- if (ret)
- return ret;
-
- ret = spi_nor_write_ear(nor, 0);
- if (ret)
- return ret;
-
- return spi_nor_write_disable(nor);
-}
-
/**
* spi_nor_xread_sr() - Read the Status Register on S3AN flashes.
* @nor: pointer to 'struct spi_nor'.
@@ -2017,73 +1985,6 @@ int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
* old entries may be missing 4K flag.
*/
static const struct flash_info spi_nor_ids[] = {
- /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
- { "w25x05", INFO(0xef3010, 0, 64 * 1024, 1, SECT_4K) },
- { "w25x10", INFO(0xef3011, 0, 64 * 1024, 2, SECT_4K) },
- { "w25x20", INFO(0xef3012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) },
- { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) },
- {
- "w25q16dw", INFO(0xef6015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
- {
- "w25q16jv-im/jm", INFO(0xef7015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- { "w25q20cl", INFO(0xef4012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25q20bw", INFO(0xef5012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25q20ew", INFO(0xef6012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) },
- {
- "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- {
- "w25q32jv", INFO(0xef7016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- {
- "w25q32jwm", INFO(0xef8016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
- { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
- {
- "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- {
- "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- {
- "w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
- { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES) },
- { "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
- SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
-
/* Catalyst / On Semiconductor -- non-JEDEC */
{ "cat25c11", CAT25_INFO( 16, 8, 16, 1, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
{ "cat25c03", CAT25_INFO( 32, 8, 16, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
@@ -2118,6 +2019,7 @@ static const struct spi_nor_manufacturer *manufacturers[] = {
&spi_nor_st,
&spi_nor_spansion,
&spi_nor_sst,
+ &spi_nor_winbond,
};
static const struct flash_info *
@@ -2811,11 +2713,6 @@ static int spi_nor_setup(struct spi_nor *nor,
return nor->params.setup(nor, hwcaps);
}
-static void winbond_set_default_init(struct spi_nor *nor)
-{
- nor->params.set_4byte = winbond_set_4byte;
-}
-
/**
* spi_nor_manufacturer_init_params() - Initialize the flash's parameters and
* settings based on MFR register and ->default_init() hook.
@@ -2823,16 +2720,6 @@ static void winbond_set_default_init(struct spi_nor *nor)
*/
static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
{
- /* Init flash parameters based on MFR */
- switch (JEDEC_MFR(nor->info)) {
- case SNOR_MFR_WINBOND:
- winbond_set_default_init(nor);
- break;
-
- default:
- break;
- }
-
if (nor->manufacturer && nor->manufacturer->fixups &&
nor->manufacturer->fixups->default_init)
nor->manufacturer->fixups->default_init(nor);
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 7bc0f6a15b36..01e0b8e2b191 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -180,6 +180,7 @@ extern const struct spi_nor_manufacturer spi_nor_micron;
extern const struct spi_nor_manufacturer spi_nor_st;
extern const struct spi_nor_manufacturer spi_nor_spansion;
extern const struct spi_nor_manufacturer spi_nor_sst;
+extern const struct spi_nor_manufacturer spi_nor_winbond;
int spi_nor_write_enable(struct spi_nor *nor);
int spi_nor_write_disable(struct spi_nor *nor);
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
new file mode 100644
index 000000000000..1e77dffbf729
--- /dev/null
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info winbond_parts[] = {
+ /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
+ { "w25x05", INFO(0xef3010, 0, 64 * 1024, 1, SECT_4K) },
+ { "w25x10", INFO(0xef3011, 0, 64 * 1024, 2, SECT_4K) },
+ { "w25x20", INFO(0xef3012, 0, 64 * 1024, 4, SECT_4K) },
+ { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) },
+ { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) },
+ { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) },
+ { "w25q16dw", INFO(0xef6015, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
+ { "w25q16jv-im/jm", INFO(0xef7015, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK |
+ SPI_NOR_HAS_TB) },
+ { "w25q20cl", INFO(0xef4012, 0, 64 * 1024, 4, SECT_4K) },
+ { "w25q20bw", INFO(0xef5012, 0, 64 * 1024, 4, SECT_4K) },
+ { "w25q20ew", INFO(0xef6012, 0, 64 * 1024, 4, SECT_4K) },
+ { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) },
+ { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "w25q32jv", INFO(0xef7016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ },
+ { "w25q32jwm", INFO(0xef8016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
+ { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
+ { "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
+ { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
+ { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
+ { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES) },
+ { "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
+ SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
+};
+
+/**
+ * winbond_set_4byte() - Set 4-byte address mode for Winbond flashes.
+ * @nor: pointer to 'struct spi_nor'.
+ * @enable: true to enter the 4-byte address mode, false to exit the 4-byte
+ * address mode.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int winbond_set_4byte(struct spi_nor *nor, bool enable)
+{
+ int ret;
+
+ ret = spi_nor_en4_ex4_set_4byte(nor, enable);
+ if (ret || enable)
+ return ret;
+
+ /*
+ * On Winbond W25Q256FV, leaving 4byte mode causes the Extended Address
+ * Register to be set to 1, so all 3-byte-address reads come from the
+ * second 16M. We must clear the register to enable normal behavior.
+ */
+ ret = spi_nor_write_enable(nor);
+ if (ret)
+ return ret;
+
+ ret = spi_nor_write_ear(nor, 0);
+ if (ret)
+ return ret;
+
+ return spi_nor_write_disable(nor);
+}
+
+static void winbond_default_init(struct spi_nor *nor)
+{
+ nor->params.set_4byte = winbond_set_4byte;
+}
+
+static const struct spi_nor_fixups winbond_fixups = {
+ .default_init = winbond_default_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_winbond = {
+ .name = "winbond",
+ .parts = winbond_parts,
+ .nparts = ARRAY_SIZE(winbond_parts),
+ .fixups = &winbond_fixups,
+};
+
--
2.23.0
Powered by blists - more mailing lists