| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200302180730.1886678-17-tudor.ambarus@microchip.com>
Date: Mon, 2 Mar 2020 18:07:53 +0000
From: <Tudor.Ambarus@...rochip.com>
To: <bbrezillon@...nel.org>, <vigneshr@...com>,
<linux-mtd@...ts.infradead.org>
CC: <miquel.raynal@...tlin.com>, <richard@....at>, <joel@....id.au>,
<andrew@...id.au>, <Nicolas.Ferre@...rochip.com>,
<alexandre.belloni@...tlin.com>, <Ludovic.Desroches@...rochip.com>,
<matthias.bgg@...il.com>, <vz@...ia.com>,
<michal.simek@...inx.com>, <ludovic.barre@...com>,
<john.garry@...wei.com>, <tglx@...utronix.de>,
<nishkadg.linux@...il.com>, <michael@...le.cc>,
<dinguyen@...nel.org>, <thor.thayer@...ux.intel.com>,
<swboyd@...omium.org>, <opensource@...ayne.com>,
<mika.westerberg@...ux.intel.com>, <kstewart@...uxfoundation.org>,
<allison@...utok.net>, <jethro@...tanix.com>, <info@...ux.net>,
<alexander.sverdlin@...ia.com>, <rfontana@...hat.com>,
<linux-kernel@...r.kernel.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-aspeed@...ts.ozlabs.org>,
<linux-arm-kernel@...ts.infradead.org>,
<Tudor.Ambarus@...rochip.com>
Subject: [PATCH 16/23] mtd: spi-nor: Move Spansion bits out of core.c
From: Boris Brezillon <bbrezillon@...nel.org>
Create a SPI NOR manufacturer driver for Spansion chips, and move the
Spansion definitions outside of core.c.
Signed-off-by: Boris Brezillon <bbrezillon@...nel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
---
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/core.c | 59 +--------------------
drivers/mtd/spi-nor/core.h | 1 +
drivers/mtd/spi-nor/spansion.c | 95 ++++++++++++++++++++++++++++++++++
4 files changed, 98 insertions(+), 58 deletions(-)
create mode 100644 drivers/mtd/spi-nor/spansion.c
diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index c7e5fb908bec..cb06ee50bf68 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -11,4 +11,5 @@ spi-nor-objs += intel.o
spi-nor-objs += issi.o
spi-nor-objs += macronix.o
spi-nor-objs += micron-st.o
+spi-nor-objs += spansion.o
obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 8d54dfe33cdc..448717543d1e 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2017,44 +2017,6 @@ int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
* old entries may be missing 4K flag.
*/
static const struct flash_info spi_nor_ids[] = {
- /* Spansion/Cypress -- single (large) sector size only, at least
- * for the chips listed here (without boot sectors).
- */
- { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl128s0", INFO6(0x012018, 0x4d0080, 256 * 1024, 64,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
- { "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
- { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) },
- { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
- { "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | USE_CLSR) },
- { "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
- { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
- { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
- { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
- { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
- { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
- { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) },
- { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) },
- { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) },
- { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) },
- { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) },
- { "s25fl004k", INFO(0xef4013, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
- { "s25fl116k", INFO(0x014015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, SECT_4K) },
- { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) },
- { "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_DUAL_READ) },
- { "s25fl208k", INFO(0x014014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ) },
- { "s25fl064l", INFO(0x016017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "s25fl128l", INFO(0x016018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "s25fl256l", INFO(0x016019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-
/* SST -- large erase sizes are "overlays", "sectors" are 4K */
{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
@@ -2173,6 +2135,7 @@ static const struct spi_nor_manufacturer *manufacturers[] = {
&spi_nor_macronix,
&spi_nor_micron,
&spi_nor_st,
+ &spi_nor_spansion,
};
static const struct flash_info *
@@ -3106,17 +3069,6 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
}
-static void spansion_post_sfdp_fixups(struct spi_nor *nor)
-{
- if (nor->params.size <= SZ_16M)
- return;
-
- nor->flags |= SNOR_F_4B_OPCODES;
- /* No small sector erase for 4-byte command set */
- nor->erase_opcode = SPINOR_OP_SE;
- nor->mtd.erasesize = nor->info->sector_size;
-}
-
static void s3an_post_sfdp_fixups(struct spi_nor *nor)
{
nor->params.setup = s3an_nor_setup;
@@ -3134,15 +3086,6 @@ static void s3an_post_sfdp_fixups(struct spi_nor *nor)
*/
static void spi_nor_post_sfdp_fixups(struct spi_nor *nor)
{
- switch (JEDEC_MFR(nor->info)) {
- case SNOR_MFR_SPANSION:
- spansion_post_sfdp_fixups(nor);
- break;
-
- default:
- break;
- }
-
if (nor->info->flags & SPI_S3AN)
s3an_post_sfdp_fixups(nor);
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 7e3ec8e4ef34..8e45617578f3 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -178,6 +178,7 @@ extern const struct spi_nor_manufacturer spi_nor_issi;
extern const struct spi_nor_manufacturer spi_nor_macronix;
extern const struct spi_nor_manufacturer spi_nor_micron;
extern const struct spi_nor_manufacturer spi_nor_st;
+extern const struct spi_nor_manufacturer spi_nor_spansion;
int spi_nor_write_enable(struct spi_nor *nor);
int spi_nor_write_disable(struct spi_nor *nor);
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
new file mode 100644
index 000000000000..16683983a20e
--- /dev/null
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info spansion_parts[] = {
+ /* Spansion/Cypress -- single (large) sector size only, at least
+ * for the chips listed here (without boot sectors).
+ */
+ { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl128s0", INFO6(0x012018, 0x4d0080, 256 * 1024, 64,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ USE_CLSR) },
+ { "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ USE_CLSR) },
+ { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) },
+ { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ USE_CLSR) },
+ { "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | USE_CLSR) },
+ { "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ USE_CLSR) },
+ { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
+ { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
+ { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
+ { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ USE_CLSR) },
+ { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ USE_CLSR) },
+ { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) },
+ { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) },
+ { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) },
+ { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) },
+ { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) },
+ { "s25fl004k", INFO(0xef4013, 0, 64 * 1024, 8,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
+ { "s25fl116k", INFO(0x014015, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, SECT_4K) },
+ { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) },
+ { "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8,
+ SECT_4K | SPI_NOR_DUAL_READ) },
+ { "s25fl208k", INFO(0x014014, 0, 64 * 1024, 16,
+ SECT_4K | SPI_NOR_DUAL_READ) },
+ { "s25fl064l", INFO(0x016017, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES) },
+ { "s25fl128l", INFO(0x016018, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES) },
+ { "s25fl256l", INFO(0x016019, 0, 64 * 1024, 512,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES) },
+};
+
+static void spansion_post_sfdp_fixups(struct spi_nor *nor)
+{
+ if (nor->params.size <= SZ_16M)
+ return;
+
+ nor->flags |= SNOR_F_4B_OPCODES;
+ /* No small sector erase for 4-byte command set */
+ nor->erase_opcode = SPINOR_OP_SE;
+ nor->mtd.erasesize = nor->info->sector_size;
+}
+
+static const struct spi_nor_fixups spansion_fixups = {
+ .post_sfdp = spansion_post_sfdp_fixups,
+};
+
+const struct spi_nor_manufacturer spi_nor_spansion = {
+ .name = "spansion",
+ .parts = spansion_parts,
+ .nparts = ARRAY_SIZE(spansion_parts),
+ .fixups = &spansion_fixups,
+};
--
2.23.0
Powered by blists - more mailing lists