| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 6 Mar 2020 21:47:34 +0100
From: Sebastian Reichel <sre@...nel.org>
To: Ashish Chavan <ashish.gschavan@...il.com>
Cc: linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] power: supply: ab8500_charger: Fix typos in commit
messages
Hi,
On Wed, Feb 26, 2020 at 11:22:23PM +0530, Ashish Chavan wrote:
> Trivial fix to spelling mistake in commit messages.
>
> Signed-off-by: Ashish Chavan <ashish.gschavan@...il.com>
> ---
Thanks, queued.
-- Sebastian
> drivers/power/supply/ab8500_charger.c | 35 +++++++++++++++------------
> 1 file changed, 19 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
> index 98b335042ba6..65741bab8552 100644
> --- a/drivers/power/supply/ab8500_charger.c
> +++ b/drivers/power/supply/ab8500_charger.c
> @@ -398,7 +398,7 @@ static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di,
> }
>
> /**
> - * ab8500_power_supply_changed - a wrapper with local extentions for
> + * ab8500_power_supply_changed - a wrapper with local extensions for
> * power_supply_changed
> * @di: pointer to the ab8500_charger structure
> * @psy: pointer to power_supply_that have changed.
> @@ -677,7 +677,7 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
> /*
> * Platform only supports USB 2.0.
> * This means that charging current from USB source
> - * is maximum 500 mA. Every occurence of USB_STAT_*_HOST_*
> + * is maximum 500 mA. Every occurrence of USB_STAT_*_HOST_*
> * should set USB_CH_IP_CUR_LVL_0P5.
> */
>
> @@ -1372,13 +1372,13 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
>
> /*
> * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts
> - * will be triggered everytime we enable the VDD ADC supply.
> + * will be triggered every time we enable the VDD ADC supply.
> * This will turn off charging for a short while.
> * It can be avoided by having the supply on when
> * there is a charger enabled. Normally the VDD ADC supply
> - * is enabled everytime a GPADC conversion is triggered. We will
> - * force it to be enabled from this driver to have
> - * the GPADC module independant of the AB8500 chargers
> + * is enabled every time a GPADC conversion is triggered.
> + * We will force it to be enabled from this driver to have
> + * the GPADC module independent of the AB8500 chargers
> */
> if (!di->vddadc_en_ac) {
> ret = regulator_enable(di->regu);
> @@ -1448,7 +1448,7 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
> if (is_ab8500_1p1_or_earlier(di->parent)) {
> /*
> * For ABB revision 1.0 and 1.1 there is a bug in the
> - * watchdog logic. That means we have to continously
> + * watchdog logic. That means we have to continuously
> * kick the charger watchdog even when no charger is
> * connected. This is only valid once the AC charger
> * has been enabled. This is a bug that is not handled
> @@ -1545,13 +1545,13 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
>
> /*
> * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts
> - * will be triggered everytime we enable the VDD ADC supply.
> + * will be triggered every time we enable the VDD ADC supply.
> * This will turn off charging for a short while.
> * It can be avoided by having the supply on when
> * there is a charger enabled. Normally the VDD ADC supply
> - * is enabled everytime a GPADC conversion is triggered. We will
> - * force it to be enabled from this driver to have
> - * the GPADC module independant of the AB8500 chargers
> + * is enabled every time a GPADC conversion is triggered.
> + * We will force it to be enabled from this driver to have
> + * the GPADC module independent of the AB8500 chargers
> */
> if (!di->vddadc_en_usb) {
> ret = regulator_enable(di->regu);
> @@ -1575,7 +1575,10 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
> return -ENXIO;
> }
>
> - /* ChVoltLevel: max voltage upto which battery can be charged */
> + /*
> + * ChVoltLevel: max voltage up to which battery can be
> + * charged
> + */
> ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
> AB8500_CH_VOLT_LVL_REG, (u8) volt_index);
> if (ret) {
> @@ -2007,7 +2010,7 @@ static void ab8500_charger_check_hw_failure_work(struct work_struct *work)
> * Work queue function for kicking the charger watchdog.
> *
> * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
> - * logic. That means we have to continously kick the charger
> + * logic. That means we have to continuously kick the charger
> * watchdog even when no charger is connected. This is only
> * valid once the AC charger has been enabled. This is
> * a bug that is not handled by the algorithm and the
> @@ -2255,7 +2258,7 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work)
> * Some chargers that breaks the USB spec is
> * identified as invalid by AB8500 and it refuse
> * to start the charging process. but by jumping
> - * thru a few hoops it can be forced to start.
> + * through a few hoops it can be forced to start.
> */
> if (is_ab8500(di->parent))
> ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
> @@ -3214,7 +3217,7 @@ static int ab8500_charger_resume(struct platform_device *pdev)
>
> /*
> * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
> - * logic. That means we have to continously kick the charger
> + * logic. That means we have to continuously kick the charger
> * watchdog even when no charger is connected. This is only
> * valid once the AC charger has been enabled. This is
> * a bug that is not handled by the algorithm and the
> @@ -3451,7 +3454,7 @@ static int ab8500_charger_probe(struct platform_device *pdev)
>
> /*
> * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
> - * logic. That means we have to continously kick the charger
> + * logic. That means we have to continuously kick the charger
> * watchdog even when no charger is connected. This is only
> * valid once the AC charger has been enabled. This is
> * a bug that is not handled by the algorithm and the
> --
> 2.17.1
>
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists