| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <170c85e33ef.10e7ed4c64871.7120630740497911364@flygoat.com>
Date: Wed, 11 Mar 2020 14:53:01 +0800
From: Jiaxun Yang <jiaxun.yang@...goat.com>
To: "Tiezhu Yang" <yangtiezhu@...ngson.cn>
Cc: "Thomas Bogendoerfer" <tsbogend@...ha.franken.de>,
"Huacai Chen" <chenhc@...ote.com>,
"linux-mips" <linux-mips@...r.kernel.org>,
"linux-kernel" <linux-kernel@...r.kernel.org>,
"Xuefeng Li" <lixuefeng@...ngson.cn>
Subject: 回复:[PATCH] MIPS: Loongson: Add model name to /proc/cpuinfo
---- 在 星期三, 2020-03-11 14:33:34 Tiezhu Yang <yangtiezhu@...ngson.cn> 撰写 ----
> In the current code, when execute command "cat /proc/cpuinfo" or "lscpu",
> it can not get cpu type and frequency directly because the model name is
> not exist, so add it.
>
> E.g. without this patch:
>
> [loongson@...alhost ~]$ lscpu
> Architecture: mips64
> Byte Order: Little Endian
> CPU(s): 4
> On-line CPU(s) list: 0-3
> Thread(s) per core: 1
> Core(s) per socket: 4
> Socket(s): 1
> NUMA node(s): 1
> L1d cache: 64K
> L1i cache: 64K
> L2 cache: 2048K
> NUMA node0 CPU(s): 0-3
>
> With this patch:
>
> [loongson@...alhost ~]$ lscpu
> Architecture: mips64
> Byte Order: Little Endian
> CPU(s): 4
> On-line CPU(s) list: 0-3
> Thread(s) per core: 1
> Core(s) per socket: 4
> Socket(s): 1
> NUMA node(s): 1
> Model name: Loongson-3A R3 (Loongson-3A3000) @ 1449MHz
> L1d cache: 64K
> L1i cache: 64K
> L2 cache: 2048K
> NUMA node0 CPU(s): 0-3
Hi Tiezhu,
Thanks for your patch, you're the successor of Huacai:
https://www.linux-mips.org/archives/linux-mips/2018-09/msg00113.html
I think it's worthy to have this string in cpuinfo as many userspace
program is parsing it beacuse x86 have it.
See my review comments below:
>
> Signed-off-by: Tiezhu Yang <yangtiezhu@...ngson.cn>
> ---
> arch/mips/include/asm/cpu-info.h | 1 +
> arch/mips/kernel/cpu-probe.c | 27 +++++++++++++++++++++++----
> arch/mips/kernel/proc.c | 4 ++++
> 3 files changed, 28 insertions(+), 4 deletions(-)
>
> diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
> index ed7ffe4..50e924e 100644
> --- a/arch/mips/include/asm/cpu-info.h
> +++ b/arch/mips/include/asm/cpu-info.h
> @@ -115,6 +115,7 @@ extern struct cpuinfo_mips cpu_data[];
> extern void cpu_probe(void);
> extern void cpu_report(void);
>
> +extern const char *__model_name[];
> extern const char *__cpu_name[];
> #define cpu_name_string() __cpu_name[raw_smp_processor_id()]
>
> diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
> index 6ab6b03..3ae40cc 100644
> --- a/arch/mips/kernel/cpu-probe.c
> +++ b/arch/mips/kernel/cpu-probe.c
> @@ -1548,6 +1548,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
> set_elf_platform(cpu, "loongson2e");
> set_isa(c, MIPS_CPU_ISA_III);
> c->fpu_msk31 |= FPU_CSR_CONDX;
> + __model_name[cpu] = "Loongson-2E";
> break;
> case PRID_REV_LOONGSON2F:
> c->cputype = CPU_LOONGSON2EF;
> @@ -1555,23 +1556,37 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
> set_elf_platform(cpu, "loongson2f");
> set_isa(c, MIPS_CPU_ISA_III);
> c->fpu_msk31 |= FPU_CSR_CONDX;
> + __model_name[cpu] = "Loongson-2F";
> break;
> case PRID_REV_LOONGSON3A_R1:
> c->cputype = CPU_LOONGSON64;
> __cpu_name[cpu] = "ICT Loongson-3";
> set_elf_platform(cpu, "loongson3a");
> set_isa(c, MIPS_CPU_ISA_M64R1);
> - c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
> - MIPS_ASE_LOONGSON_EXT);
> + c->ases |= (MIPS_ASE_LOONGSON_MMI |
> + MIPS_ASE_LOONGSON_CAM |
> + MIPS_ASE_LOONGSON_EXT);
Is the newline intentional?
Also applied to code below.
> + __model_name[cpu] = "Loongson-3A R1 (Loongson-3A1000)";
> break;
> case PRID_REV_LOONGSON3B_R1:
> + c->cputype = CPU_LOONGSON64;
> + __cpu_name[cpu] = "ICT Loongson-3";
> + set_elf_platform(cpu, "loongson3b");
> + set_isa(c, MIPS_CPU_ISA_M64R1);
> + c->ases |= (MIPS_ASE_LOONGSON_MMI |
> + MIPS_ASE_LOONGSON_CAM |
> + MIPS_ASE_LOONGSON_EXT);
> + __model_name[cpu] = "Loongson-3B R1 (Loongson-3B1000)";
> + break;
> case PRID_REV_LOONGSON3B_R2:
> c->cputype = CPU_LOONGSON64;
> __cpu_name[cpu] = "ICT Loongson-3";
> set_elf_platform(cpu, "loongson3b");
> set_isa(c, MIPS_CPU_ISA_M64R1);
> - c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
> - MIPS_ASE_LOONGSON_EXT);
> + c->ases |= (MIPS_ASE_LOONGSON_MMI |
> + MIPS_ASE_LOONGSON_CAM |
> + MIPS_ASE_LOONGSON_EXT);
> + __model_name[cpu] = "Loongson-3B R2 (Loongson-3B1500)";
> break;
> }
>
> @@ -1926,6 +1941,7 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
> __cpu_name[cpu] = "ICT Loongson-3";
> set_elf_platform(cpu, "loongson3a");
> set_isa(c, MIPS_CPU_ISA_M64R2);
> + __model_name[cpu] = "Loongson-3A R2 (Loongson-3A2000)";
> break;
> case PRID_REV_LOONGSON3A_R3_0:
> case PRID_REV_LOONGSON3A_R3_1:
> @@ -1933,6 +1949,7 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
> __cpu_name[cpu] = "ICT Loongson-3";
> set_elf_platform(cpu, "loongson3a");
> set_isa(c, MIPS_CPU_ISA_M64R2);
> + __model_name[cpu] = "Loongson-3A R3 (Loongson-3A3000)";
> break;
> }
>
> @@ -1952,6 +1969,7 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
> c->writecombine = _CACHE_UNCACHED_ACCELERATED;
> c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
> MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2);
> + __model_name[cpu] = "Loongson-3A R4 (Loongson-3A4000)";
> break;
> default:
> panic("Unknown Loongson Processor ID!");
> @@ -2111,6 +2129,7 @@ u64 __ua_limit;
> EXPORT_SYMBOL(__ua_limit);
> #endif
>
> +const char *__model_name[NR_CPUS];
> const char *__cpu_name[NR_CPUS];
> const char *__elf_platform;
>
> diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
> index f8d3671..5fc74e6 100644
> --- a/arch/mips/kernel/proc.c
> +++ b/arch/mips/kernel/proc.c
> @@ -15,6 +15,7 @@
> #include <asm/mipsregs.h>
> #include <asm/processor.h>
> #include <asm/prom.h>
> +#include <asm/time.h>
>
> unsigned int vced_count, vcei_count;
>
> @@ -63,6 +64,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
> seq_printf(m, fmt, __cpu_name[n],
> (version >> 4) & 0x0f, version & 0x0f,
> (fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
> + if (__model_name[n])
> + seq_printf(m, "model name\t\t: %s @ %uMHz\n",
> + __model_name[n], mips_hpt_frequency / 500000);
> seq_printf(m, "BogoMIPS\t\t: %u.%02u\n",
Actually I don't think take mips_hpt_frequency here is a good option. mips_hpt_frequency
is used by cevt-r4k. Processors like Ingenic don't use cevt-r4k don't have it.
Probably you can do as what Huacai did, append the frequency part in platform code.
> cpu_data[n].udelay_val / (500000/HZ),
> (cpu_data[n].udelay_val / (5000/HZ)) % 100);
> --
> 2.1.0
>
>
Thanks.
--
Jiaxun Yang
Powered by blists - more mailing lists