[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <158413179776.164562.8295974225127853050@swboyd.mtv.corp.google.com>
Date: Fri, 13 Mar 2020 13:36:37 -0700
From: Stephen Boyd <sboyd@...nel.org>
To: Ansuel Smith <ansuelsmth@...il.com>, agross@...nel.org
Cc: Ansuel Smith <ansuelsmth@...il.com>,
Mathieu Olivari <mathieu@...eaurora.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Michael Turquette <mturquette@...libre.com>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org
Subject: Re: [PATCH] ARM: qcom: Disable i2c device on gsbi4 for ipq806x
Quoting Ansuel Smith (2020-03-13 12:58:16)
> diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
> index 554c65e7aa0e..580aec63030d 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
> +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
> @@ -21,14 +21,5 @@ mux {
> };
> };
> };
> -
> - gsbi@...00000 {
> - i2c@...80000 {
> - status = "ok";
> - clock-frequency = <200000>;
> - pinctrl-0 = <&i2c4_pins>;
> - pinctrl-names = "default";
> - };
> - };
> };
> };
> diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
> index b0eee0903807..75706807e6cf 100644
> --- a/drivers/clk/qcom/gcc-ipq806x.c
> +++ b/drivers/clk/qcom/gcc-ipq806x.c
> @@ -782,7 +782,7 @@ static struct clk_rcg gsbi4_qup_src = {
> .parent_names = gcc_pxo_pll8,
> .num_parents = 2,
> .ops = &clk_rcg_ops,
> - .flags = CLK_SET_PARENT_GATE,
> + .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
A better solution is to use the protected-clocks property so we don't
try to touch these clks at all on this device. So this whole patch can
be routed through arm-soc and remove the i2c node and add some dt
property to the gcc node.
> },
> },
> };
Powered by blists - more mailing lists