[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1584133954-6953-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Fri, 13 Mar 2020 21:12:32 +0000
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
To: Mauro Carvalho Chehab <mchehab@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
NXP Linux Team <linux-imx@....com>,
Magnus Damm <magnus.damm@...il.com>,
Ezequiel Garcia <ezequiel@...labora.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-renesas-soc@...r.kernel.org,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Fabio Estevam <festevam@...il.com>,
linux-media@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v3 2/4] media: i2c: ov5645: Switch to assigned-clock-rates
This patch switches to assigned-clock-rates for specifying the clock rate.
The clk-conf.c internally handles setting the clock rate when
assigned-clock-rates is passed.
The driver now sets the clock frequency only if the deprecated property
clock-frequency is defined instead assigned-clock-rates, this is to avoid
breakage with existing DT binaries.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
---
drivers/media/i2c/ov5645.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
index a6c17d1..4fbabf3 100644
--- a/drivers/media/i2c/ov5645.c
+++ b/drivers/media/i2c/ov5645.c
@@ -1055,6 +1055,7 @@ static int ov5645_probe(struct i2c_client *client)
struct device_node *endpoint;
struct ov5645 *ov5645;
u8 chip_id_high, chip_id_low;
+ bool set_clk = false;
unsigned int i;
u32 xclk_freq;
int ret;
@@ -1094,12 +1095,18 @@ static int ov5645_probe(struct i2c_client *client)
return PTR_ERR(ov5645->xclk);
}
- ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq);
- if (ret) {
- dev_err(dev, "could not get xclk frequency\n");
- return ret;
+ /* check if deprecated property clock-frequency is defined */
+ ret = of_property_read_u32(dev->of_node, "clock-frequency",
+ &xclk_freq);
+ if (!ret) {
+ ret = clk_set_rate(ov5645->xclk, xclk_freq);
+ if (ret) {
+ dev_err(dev, "could not set xclk frequency\n");
+ return ret;
+ }
}
+ xclk_freq = clk_get_rate(ov5645->xclk);
/* external clock must be 24MHz, allow 1% tolerance */
if (xclk_freq < 23760000 || xclk_freq > 24240000) {
dev_err(dev, "external clock frequency %u is not supported\n",
@@ -1107,12 +1114,6 @@ static int ov5645_probe(struct i2c_client *client)
return -EINVAL;
}
- ret = clk_set_rate(ov5645->xclk, xclk_freq);
- if (ret) {
- dev_err(dev, "could not set xclk frequency\n");
- return ret;
- }
-
for (i = 0; i < OV5645_NUM_SUPPLIES; i++)
ov5645->supplies[i].supply = ov5645_supply_name[i];
--
2.7.4
Powered by blists - more mailing lists