[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1584133954-6953-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Fri, 13 Mar 2020 21:12:33 +0000
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
To: Mauro Carvalho Chehab <mchehab@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
NXP Linux Team <linux-imx@....com>,
Magnus Damm <magnus.damm@...il.com>,
Ezequiel Garcia <ezequiel@...labora.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-renesas-soc@...r.kernel.org,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Fabio Estevam <festevam@...il.com>,
linux-media@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v3 3/4] media: i2c: ov5645: Set maximum leverage of external clock frequency to 24480000
While testing on Renesas RZ/G2E platform, noticed the clock frequency to
be 24242424 as a result the probe failed. However increasing the maximum
leverage of external clock frequency to 24480000 fixes this issue. Since
this difference is small enough and is insignificant set the same in the
driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
---
drivers/media/i2c/ov5645.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
index 4fbabf3..b49359b 100644
--- a/drivers/media/i2c/ov5645.c
+++ b/drivers/media/i2c/ov5645.c
@@ -1107,8 +1107,10 @@ static int ov5645_probe(struct i2c_client *client)
}
xclk_freq = clk_get_rate(ov5645->xclk);
- /* external clock must be 24MHz, allow 1% tolerance */
- if (xclk_freq < 23760000 || xclk_freq > 24240000) {
+ /* external clock must be 24MHz, allow a minimum 1% and a maximum of 2%
+ * tolerance
+ */
+ if (xclk_freq < 23760000 || xclk_freq > 24480000) {
dev_err(dev, "external clock frequency %u is not supported\n",
xclk_freq);
return -EINVAL;
--
2.7.4
Powered by blists - more mailing lists