[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1584133954-6953-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Fri, 13 Mar 2020 21:12:31 +0000
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
To: Mauro Carvalho Chehab <mchehab@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
NXP Linux Team <linux-imx@....com>,
Magnus Damm <magnus.damm@...il.com>,
Ezequiel Garcia <ezequiel@...labora.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-renesas-soc@...r.kernel.org,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Fabio Estevam <festevam@...il.com>,
linux-media@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v3 1/4] media: dt-bindings: media: i2c: Switch to assigned-clock-rates
Use assigned-clock-rates to specify the clock rate. Also mark
clock-frequency property as deprecated.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
---
Documentation/devicetree/bindings/media/i2c/ov5645.txt | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
index 72ad992..e62fe82 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
@@ -8,7 +8,7 @@ Required Properties:
- compatible: Value should be "ovti,ov5645".
- clocks: Reference to the xclk clock.
- clock-names: Should be "xclk".
-- clock-frequency: Frequency of the xclk clock.
+- clock-frequency (deprecated): Frequency of the xclk clock.
- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
to the hardware pin PWDNB which is physically active low.
- reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
@@ -37,7 +37,8 @@ Example:
clocks = <&clks 200>;
clock-names = "xclk";
- clock-frequency = <24000000>;
+ assigned-clocks = <&clks 200>;
+ assigned-clock-rates = <24000000>;
vdddo-supply = <&camera_dovdd_1v8>;
vdda-supply = <&camera_avdd_2v8>;
--
2.7.4
Powered by blists - more mailing lists