[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200314171912.GA24092@roeck-us.net>
Date: Sat, 14 Mar 2020 10:19:12 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: afzal mohammed <afzal.mohd.ma@...il.com>
Cc: Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Florian Fainelli <f.fainelli@...il.com>,
Paul Burton <paulburton@...nel.org>,
linux-mips@...r.kernel.org, Ralf Baechle <ralf@...ux-mips.org>,
linux-kernel@...r.kernel.org,
bcm-kernel-feedback-list@...adcom.com,
Jiaxun Yang <jiaxun.yang@...goat.com>,
"Maciej W. Rozycki" <macro@...ux-mips.org>,
John Crispin <john@...ozen.org>,
Huacai Chen <chenhc@...ote.com>,
Nathan Chancellor <natechancellor@...il.com>,
Keguang Zhang <keguang.zhang@...il.com>,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2] MIPS: pass non-NULL dev_id on shared request_irq()
On Sat, Mar 14, 2020 at 01:43:12PM +0530, afzal mohammed wrote:
> Recently all usages of setup_irq() was replaced by request_irq().
> request_irq() does a few sanity checks that were not done in
> setup_irq(), if they fail irq registration will fail. One of the check
> is to ensure that non-NULL dev_id is passed in the case of shared irq.
> This caused malta on qemu to hang.
>
> Fix it by passing handler as dev_id to all request_irq()'s that are
> shared. For sni, instead of passing non-NULL dev_id, remove shared irq
> flags.
>
> Fixes: ac8fd122e070 ("MIPS: Replace setup_irq() by request_irq()")
> Reported-by: Nathan Chancellor <natechancellor@...il.com>
> Suggested-by: Thomas Bogendoerfer <tsbogend@...ha.franken.de>
> Signed-off-by: afzal mohammed <afzal.mohd.ma@...il.com>
Tested-by: Guenter Roeck <linux@...ck-us.net>
> ---
>
> v2:
> * use handler for dev_id
> * remove shared irq flags for sni
>
> arch/mips/dec/setup.c | 2 +-
> arch/mips/kernel/cevt-r4k.c | 3 ++-
> arch/mips/loongson2ef/lemote-2f/irq.c | 2 +-
> arch/mips/pmcs-msp71xx/msp_time.c | 2 +-
> arch/mips/sni/a20r.c | 4 ++--
> arch/mips/sni/pcit.c | 8 ++++----
> arch/mips/sni/rm200.c | 6 +++---
> 7 files changed, 14 insertions(+), 13 deletions(-)
>
> diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
> index c8bbac0c5051..d4e868b828e5 100644
> --- a/arch/mips/dec/setup.c
> +++ b/arch/mips/dec/setup.c
> @@ -758,7 +758,7 @@ void __init arch_init_irq(void)
> /* Register the bus error interrupt. */
> if (dec_interrupt[DEC_IRQ_BUS] >= 0 && busirq_handler) {
> if (request_irq(dec_interrupt[DEC_IRQ_BUS], busirq_handler,
> - busirq_flags, "bus error", NULL))
> + busirq_flags, "bus error", busirq_handler))
> pr_err("Failed to register bus error interrupt\n");
> }
> /* Register the HALT interrupt. */
> diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
> index 64e917dfe6b2..17a9cbb8b3df 100644
> --- a/arch/mips/kernel/cevt-r4k.c
> +++ b/arch/mips/kernel/cevt-r4k.c
> @@ -292,7 +292,8 @@ int r4k_clockevent_init(void)
>
> cp0_timer_irq_installed = 1;
>
> - if (request_irq(irq, c0_compare_interrupt, flags, "timer", NULL))
> + if (request_irq(irq, c0_compare_interrupt, flags, "timer",
> + c0_compare_interrupt))
> pr_err("Failed to request irq %d (timer)\n", irq);
>
> return 0;
> diff --git a/arch/mips/loongson2ef/lemote-2f/irq.c b/arch/mips/loongson2ef/lemote-2f/irq.c
> index 34e15e8b7a8f..6f00579971a3 100644
> --- a/arch/mips/loongson2ef/lemote-2f/irq.c
> +++ b/arch/mips/loongson2ef/lemote-2f/irq.c
> @@ -109,7 +109,7 @@ void __init mach_init_irq(void)
>
> /* setup north bridge irq (bonito) */
> if (request_irq(LOONGSON_NORTH_BRIDGE_IRQ, ip6_action,
> - IRQF_SHARED | IRQF_NO_THREAD, "cascade", NULL))
> + IRQF_SHARED | IRQF_NO_THREAD, "cascade", ip6_action))
> pr_err("Failed to register north bridge cascade interrupt\n");
> /* setup source bridge irq (i8259) */
> if (request_irq(LOONGSON_SOUTH_BRIDGE_IRQ, no_action,
> diff --git a/arch/mips/pmcs-msp71xx/msp_time.c b/arch/mips/pmcs-msp71xx/msp_time.c
> index baf0da8b4c98..9c629829f447 100644
> --- a/arch/mips/pmcs-msp71xx/msp_time.c
> +++ b/arch/mips/pmcs-msp71xx/msp_time.c
> @@ -81,7 +81,7 @@ unsigned int get_c0_compare_int(void)
> /* MIPS_MT modes may want timer for second VPE */
> if ((get_current_vpe()) && !tim_installed) {
> if (request_irq(MSP_INT_VPE1_TIMER, c0_compare_interrupt, flags,
> - "timer", NULL))
> + "timer", c0_compare_interrupt))
> pr_err("Failed to register timer interrupt\n");
> tim_installed++;
> }
> diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
> index ba966d62fb4b..0ecffb65fd6d 100644
> --- a/arch/mips/sni/a20r.c
> +++ b/arch/mips/sni/a20r.c
> @@ -222,8 +222,8 @@ void __init sni_a20r_irq_init(void)
> irq_set_chip_and_handler(i, &a20r_irq_type, handle_level_irq);
> sni_hwint = a20r_hwint;
> change_c0_status(ST0_IM, IE_IRQ0);
> - if (request_irq(SNI_A20R_IRQ_BASE + 3, sni_isa_irq_handler,
> - IRQF_SHARED, "ISA", NULL))
> + if (request_irq(SNI_A20R_IRQ_BASE + 3, sni_isa_irq_handler, 0, "ISA",
> + NULL))
> pr_err("Failed to register ISA interrupt\n");
> }
>
> diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c
> index 4a850ab03398..b331fe22c529 100644
> --- a/arch/mips/sni/pcit.c
> +++ b/arch/mips/sni/pcit.c
> @@ -244,8 +244,8 @@ void __init sni_pcit_irq_init(void)
> *(volatile u32 *)SNI_PCIT_INT_REG = 0;
> sni_hwint = sni_pcit_hwint;
> change_c0_status(ST0_IM, IE_IRQ1);
> - if (request_irq(SNI_PCIT_INT_START + 6, sni_isa_irq_handler,
> - IRQF_SHARED, "ISA", NULL))
> + if (request_irq(SNI_PCIT_INT_START + 6, sni_isa_irq_handler, 0, "ISA",
> + NULL))
> pr_err("Failed to register ISA interrupt\n");
> }
>
> @@ -259,8 +259,8 @@ void __init sni_pcit_cplus_irq_init(void)
> *(volatile u32 *)SNI_PCIT_INT_REG = 0x40000000;
> sni_hwint = sni_pcit_hwint_cplus;
> change_c0_status(ST0_IM, IE_IRQ0);
> - if (request_irq(MIPS_CPU_IRQ_BASE + 3, sni_isa_irq_handler,
> - IRQF_SHARED, "ISA", NULL))
> + if (request_irq(MIPS_CPU_IRQ_BASE + 3, sni_isa_irq_handler, 0, "ISA",
> + NULL))
> pr_err("Failed to register ISA interrupt\n");
> }
>
> diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
> index ba1f2fc6a43e..d84744ca871d 100644
> --- a/arch/mips/sni/rm200.c
> +++ b/arch/mips/sni/rm200.c
> @@ -473,10 +473,10 @@ void __init sni_rm200_irq_init(void)
> sni_hwint = sni_rm200_hwint;
> change_c0_status(ST0_IM, IE_IRQ0);
> if (request_irq(SNI_RM200_INT_START + 0, sni_rm200_i8259A_irq_handler,
> - IRQF_SHARED, "onboard ISA", NULL))
> + 0, "onboard ISA", NULL))
> pr_err("Failed to register onboard ISA interrupt\n");
> - if (request_irq(SNI_RM200_INT_START + 1, sni_isa_irq_handler,
> - IRQF_SHARED, "ISA", NULL))
> + if (request_irq(SNI_RM200_INT_START + 1, sni_isa_irq_handler, 0, "ISA",
> + NULL))
> pr_err("Failed to register ISA interrupt\n");
> }
>
> --
> 2.18.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Powered by blists - more mailing lists