| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHLCerOSz4aAkukPzRRwOgeiTnw1ATSp0gPd9ujqiv9uAfj2Mg@mail.gmail.com>
Date: Tue, 17 Mar 2020 16:22:00 +0530
From: Amit Kucheria <amit.kucheria@...durent.com>
To: Rajeshwari <rkambl@...eaurora.org>
Cc: Andy Gross <agross@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>, LKML <linux-kernel@...r.kernel.org>,
sivaa@...eaurora.org, sanm@...eaurora.org,
Doug Anderson <dianders@...omium.org>
Subject: Re: [PATCH] arm64: dts: qcom: sc7180: Changed polling-delay in
Thermal-zones node
On Tue, Mar 17, 2020 at 1:11 PM Rajeshwari <rkambl@...eaurora.org> wrote:
>
> Changed polling-delay and polling-delay-passive to zero as per
> the requirement.
>
> Signed-off-by: Rajeshwari <rkambl@...eaurora.org>
Reviewed-by: Amit Kucheria <amit.kucheria@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 100 +++++++++++++++++------------------
> 1 file changed, 50 insertions(+), 50 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index ca876ed..d81c4f1 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -1907,8 +1907,8 @@
>
> thermal-zones {
> cpu0-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens0 1>;
>
> @@ -1955,8 +1955,8 @@
> };
>
> cpu1-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens0 2>;
>
> @@ -2003,8 +2003,8 @@
> };
>
> cpu2-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens0 3>;
>
> @@ -2051,8 +2051,8 @@
> };
>
> cpu3-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens0 4>;
>
> @@ -2099,8 +2099,8 @@
> };
>
> cpu4-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens0 5>;
>
> @@ -2147,8 +2147,8 @@
> };
>
> cpu5-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens0 6>;
>
> @@ -2195,8 +2195,8 @@
> };
>
> cpu6-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens0 9>;
>
> @@ -2235,8 +2235,8 @@
> };
>
> cpu7-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens0 10>;
>
> @@ -2275,8 +2275,8 @@
> };
>
> cpu8-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens0 11>;
>
> @@ -2315,8 +2315,8 @@
> };
>
> cpu9-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens0 12>;
>
> @@ -2355,8 +2355,8 @@
> };
>
> aoss0-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens0 0>;
>
> @@ -2376,8 +2376,8 @@
> };
>
> cpuss0-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens0 7>;
>
> @@ -2396,8 +2396,8 @@
> };
>
> cpuss1-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens0 8>;
>
> @@ -2416,8 +2416,8 @@
> };
>
> gpuss0-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens0 13>;
>
> @@ -2437,8 +2437,8 @@
> };
>
> gpuss1-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens0 14>;
>
> @@ -2458,8 +2458,8 @@
> };
>
> aoss1-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens1 0>;
>
> @@ -2479,8 +2479,8 @@
> };
>
> cwlan-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens1 1>;
>
> @@ -2500,8 +2500,8 @@
> };
>
> audio-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens1 2>;
>
> @@ -2521,8 +2521,8 @@
> };
>
> ddr-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens1 3>;
>
> @@ -2542,8 +2542,8 @@
> };
>
> q6-hvx-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens1 4>;
>
> @@ -2563,8 +2563,8 @@
> };
>
> camera-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens1 5>;
>
> @@ -2584,8 +2584,8 @@
> };
>
> mdm-core-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens1 6>;
>
> @@ -2605,8 +2605,8 @@
> };
>
> mdm-dsp-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens1 7>;
>
> @@ -2626,8 +2626,8 @@
> };
>
> npu-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens1 8>;
>
> @@ -2647,8 +2647,8 @@
> };
>
> video-thermal {
> - polling-delay-passive = <250>;
> - polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
>
> thermal-sensors = <&tsens1 9>;
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
Powered by blists - more mailing lists