[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CANpmjNOvDrzb=hbA2D+HW12Jy3LMLfdTrd2H=wgYCwQUcZgDzw@mail.gmail.com>
Date: Fri, 20 Mar 2020 15:49:31 +0100
From: Marco Elver <elver@...gle.com>
To: Boqun Feng <boqun.feng@...il.com>
Cc: "Paul E. McKenney" <paulmck@...nel.org>,
LKML <linux-kernel@...r.kernel.org>,
kasan-dev <kasan-dev@...glegroups.com>, kernel-team@...com,
Ingo Molnar <mingo@...nel.org>,
Andrey Konovalov <andreyknvl@...gle.com>,
Alexander Potapenko <glider@...gle.com>,
Dmitry Vyukov <dvyukov@...gle.com>, Qian Cai <cai@....pw>
Subject: Re: [PATCH kcsan 17/32] kcsan: Introduce ASSERT_EXCLUSIVE_* macros
On Thu, 19 Mar 2020 at 04:23, Boqun Feng <boqun.feng@...il.com> wrote:
>
> On Tue, Mar 17, 2020 at 12:12:36PM +0100, Marco Elver wrote:
> > On Sat, 14 Mar 2020 at 03:22, Boqun Feng <boqun.feng@...il.com> wrote:
> > >
> > > On Fri, Mar 13, 2020 at 05:15:32PM +0100, Marco Elver wrote:
> > > > On Fri, 13 Mar 2020 at 09:52, Boqun Feng <boqun.feng@...il.com> wrote:
> > > > >
> > > > > Hi Marco,
> > > > >
> > > > > On Mon, Mar 09, 2020 at 12:04:05PM -0700, paulmck@...nel.org wrote:
> > > > > > From: Marco Elver <elver@...gle.com>
> > > > > >
> > > > > > Introduces ASSERT_EXCLUSIVE_WRITER and ASSERT_EXCLUSIVE_ACCESS, which
> > > > > > may be used to assert properties of synchronization logic, where
> > > > > > violation cannot be detected as a normal data race.
> > > > > >
> > > > > > Examples of the reports that may be generated:
> > > > > >
> > > > > > ==================================================================
> > > > > > BUG: KCSAN: assert: race in test_thread / test_thread
> > > > > >
> > > > > > write to 0xffffffffab3d1540 of 8 bytes by task 466 on cpu 2:
> > > > > > test_thread+0x8d/0x111
> > > > > > debugfs_write.cold+0x32/0x44
> > > > > > ...
> > > > > >
> > > > > > assert no writes to 0xffffffffab3d1540 of 8 bytes by task 464 on cpu 0:
> > > > > > test_thread+0xa3/0x111
> > > > > > debugfs_write.cold+0x32/0x44
> > > > > > ...
> > > > > > ==================================================================
> > > > > >
> > > > > > ==================================================================
> > > > > > BUG: KCSAN: assert: race in test_thread / test_thread
> > > > > >
> > > > > > assert no accesses to 0xffffffffab3d1540 of 8 bytes by task 465 on cpu 1:
> > > > > > test_thread+0xb9/0x111
> > > > > > debugfs_write.cold+0x32/0x44
> > > > > > ...
> > > > > >
> > > > > > read to 0xffffffffab3d1540 of 8 bytes by task 464 on cpu 0:
> > > > > > test_thread+0x77/0x111
> > > > > > debugfs_write.cold+0x32/0x44
> > > > > > ...
> > > > > > ==================================================================
> > > > > >
> > > > > > Signed-off-by: Marco Elver <elver@...gle.com>
> > > > > > Suggested-by: Paul E. McKenney <paulmck@...nel.org>
> > > > > > Signed-off-by: Paul E. McKenney <paulmck@...nel.org>
> > > > > > ---
> > > > > > include/linux/kcsan-checks.h | 40 ++++++++++++++++++++++++++++++++++++++++
> > > > > > 1 file changed, 40 insertions(+)
> > > > > >
> > > > > > diff --git a/include/linux/kcsan-checks.h b/include/linux/kcsan-checks.h
> > > > > > index 5dcadc2..cf69617 100644
> > > > > > --- a/include/linux/kcsan-checks.h
> > > > > > +++ b/include/linux/kcsan-checks.h
> > > > > > @@ -96,4 +96,44 @@ static inline void kcsan_check_access(const volatile void *ptr, size_t size,
> > > > > > kcsan_check_access(ptr, size, KCSAN_ACCESS_ATOMIC | KCSAN_ACCESS_WRITE)
> > > > > > #endif
> > > > > >
> > > > > > +/**
> > > > > > + * ASSERT_EXCLUSIVE_WRITER - assert no other threads are writing @var
> > > > > > + *
> > > > > > + * Assert that there are no other threads writing @var; other readers are
> > > > > > + * allowed. This assertion can be used to specify properties of concurrent code,
> > > > > > + * where violation cannot be detected as a normal data race.
> > > > > > + *
> > > > >
> > > > > I like the idea that we can assert no other writers, however I think
> > > > > assertions like ASSERT_EXCLUSIVE_WRITER() are a little limited. For
> > > > > example, if we have the following code:
> > > > >
> > > > > preempt_disable();
> > > > > do_sth();
> > > > > raw_cpu_write(var, 1);
> > > > > do_sth_else();
> > > > > preempt_enable();
> > > > >
> > > > > we can add the assert to detect another potential writer like:
> > > > >
> > > > > preempt_disable();
> > > > > do_sth();
> > > > > ASSERT_EXCLUSIVE_WRITER(var);
> > > > > raw_cpu_write(var, 1);
> > > > > do_sth_else();
> > > > > preempt_enable();
> > > > >
> > > > > , but, if I understand how KCSAN works correctly, it only works if the
> > > > > another writer happens when the ASSERT_EXCLUSIVE_WRITER(var) is called,
> > > > > IOW, it can only detect another writer between do_sth() and
> > > > > raw_cpu_write(). But our intent is to prevent other writers for the
> > > > > whole preemption-off section. With this assertion introduced, people may
> > > > > end up with code like:
> > > >
> > > > To confirm: KCSAN will detect a race if it sets up a watchpoint on
> > > > ASSERT_EXCLUSIVE_WRITER(var), and a concurrent write happens. Note
> > > > that the watchpoints aren't always set up, but only periodically
> > > > (discussed more below). For every watchpoint, we also inject an
> > > > artificial delay. Pseudo-code:
> > > >
> > > > if watchpoint for access already set up {
> > > > consume watchpoint;
> > > > else if should set up watchpoint {
> > > > setup watchpoint;
> > > > udelay(...);
> > > > check watchpoint consumed;
> > > > release watchpoint;
> > > > }
> > > >
> > >
> > > Yes, I get this part.
> > >
> > > > > preempt_disable();
> > > > > ASSERT_EXCLUSIVE_WRITER(var);
> > > > > do_sth();
> > > > > ASSERT_EXCLUSIVE_WRITER(var);
> > > > > raw_cpu_write(var, 1);
> > > > > ASSERT_EXCLUSIVE_WRITER(var);
> > > > > do_sth_else();
> > > > > ASSERT_EXCLUSIVE_WRITER(var);
> > > > > preempt_enable();
> > > > >
> > > > > and that is horrible...
> > > >
> > > > It is, and I would strongly discourage any such use, because it's not
> > > > necessary. See below.
> > > >
> > > > > So how about making a pair of annotations
> > > > > ASSERT_EXCLUSIVE_WRITER_BEGIN() and ASSERT_EXCLUSIVE_WRITER_END(), so
> > > > > that we can write code like:
> > > > >
> > > > > preempt_disable();
> > > > > ASSERT_EXCLUSIVE_WRITER_BEGIN(var);
> > > > > do_sth();
> > > > > raw_cpu_write(var, 1);
> > > > > do_sth_else();
> > > > > ASSERT_EXCLUSIVE_WRITER_END(var);
> > > > > preempt_enable();
> > > > >
> > > > > ASSERT_EXCLUSIVE_WRITER_BEGIN() could be a rough version of watchpoint
> > > > > setting up and ASSERT_EXCLUSIVE_WRITER_END() could be watchpoint
> > > > > removing. So I think it's feasible.
> > > >
> > > > Keep in mind that the time from ASSERT_EXCLUSIVE_WRITER_BEGIN to END
> > > > might be on the order of a few nanosec, whereas KCSAN's default
> > > > watchpoint delay is 10s of microsec (default ~80 for tasks). That
> > > > means we would still have to set up a delay somewhere, and the few
> > > > nanosec between BEGIN and END are insignificant and don't buy us
> > > > anything.
> > > >
> > >
> > > Yeah, the delay doesn't buy us anything given the default watchpoint
> > > delay, and I agree even with *_{BEGIN/END}, we still need to set up a
> > > delay somewhere. Adding a delay makes the watchpoint live longer so that
> > > a problem will more likely happen, but sometimes the delay won't be
> > > enough, considering another writer like:
> > >
> > > if (per_cpu(var, cpu) == 1)
> > > per_cpu(var, cpu) = 0;
> > >
> > > in this user case, percpu variable "var" is used for maintaining some
> > > state machine, and a CPU set a state with its own variable so that other
> > > CPUs can consume it. And this another writer cannot be catched by:
> > >
> > > preempt_disable();
> > > do_sth();
> > > ASSERT_EXCLUSIVE_WRITER(var);
> > > raw_cpu_write(var, 1);
> > > do_sth_else();
> > > preempt_enable();
> > >
> >
> > Right, the example makes sense.
> >
> > That is assuming there are various other expected racy reads that are
> > fine. If that's not true, ASSERT_EXCLUSIVE_ACCESS should be
> > considered.
> >
> > > , no matter how long the delay is set. Another example: let's say the
> > > do_sth_else() above is actually an operation that queues a callback
> > > which writes to "var". In one version, do_sth_else() uses call_rcu(),
> > > which works, because preemption-off is treated as RCU read-side critical
> > > section, so we are fine. But if someone else changes it to queue_work()
> > > for some reason, the code is just broken, and KCSAN cannot detect it, no
> > > matter how long the delay is.
> > >
> > > To summarize, a delay is helpful to trigger a problem because it allows
> > > _other_ CPU/threads to run more code and do more memory accesses,
> > > however it's not helpful if a particular problem happens due to some
> > > memory effects of the current/watched CPU/thread. While *_{BEGIN/END}
> > > can be helpful in this case.
> >
> > Makes sense.
> >
> > > > Re feasibility: Right now setting up and removing watchpoints is not
> > > > exposed, and doing something like this would be an extremely intrusive
> > > > change. Because of that, without being able to quantify the actual
> > > > usefulness of this, and having evaluated better options (see below),
> > > > I'd recommend not pursuing this.
> > > >
> > > > > Thoughts?
> > > >
> > > > Firstly, what is your objective? From what I gather you want to
> > > > increase the probability of detecting a race with 'var'.
> > > >
> > >
> > > Right, I want to increase the probablity.
> > >
> > > > I agree, and have been thinking about it, but there are other options
> > > > that haven't been exhausted, before we go and make the interface more
> > > > complicated.
> > > >
> > > > == Interface design ==
> > > > The interface as it is right now, is intuitive and using it is hard to
> > > > get wrong. Demanding begin/end markers introduces complexity that will
> > >
> > > Yeah, the interface is intuitive, however it's still an extra effort to
> > > put those assertions, right? Which means it doesn't come for free,
> > > compared to other detection KCSAN can do, the developers don't need to
> > > put extra lines of code. Given the extra effort for developers to use
> > > the detect, I think we should dicuss the design thoroughly.
> > >
> > > Besides the semantics of assertions is usually "do some checking right
> > > now to see if things go wrong", and I don't think it quite matches the
> > > semantics of an exclusive writer: "in this piece of code, I'm the only
> > > one who can do the write".
> > >
> > > > undoubtedly result in incorrect usage, because as soon as you somehow
> > > > forget to end the region, you'll get tons of false positives. This may
> > > > be due to control-flow that was missed etc. We had a similar problem
> > > > with seqlocks, and getting them to work correctly with KCSAN was
> > > > extremely difficult, because clear begin and end markers weren't
> > > > always given. I imagine introducing an interface like this will
> > > > ultimately result in similar problems, as much as we'd like to believe
> > > > this won't ever happen.
> > > >
> > >
> > > Well, if we use *_{BEGIN,END} approach, one solution is combining them
> > > with sections introducing primitives (such as preemp_disable() and
> > > preempt_enable()), for example, we can add
> > >
> > > #define preempt_disable_for(var) \
> > > do { \
> > > preempt_disable(); \
> > > ASSERT_EXCLUSIVE_WRITER_BEGIN(var); \
> > > }
> > >
> > > #define preempt_enable_for(var) \
> > > do { \
> > > ASSERT_EXCLUSIVE_WRITER_END(var); \
> > > preempt_enable(); \
> > > }
> > >
> > > (similar for spin lock)
> > >
> > > #define spin_lock_for(lock, var) \
> > > do { \
> > > spin_lock(lock); \
> > > ASSERT_EXCLUSIVE_WRITER_BEGIN(var); \
> > > }
> > >
> > > #define spin_unlock_for(lock, var) \
> > > do { \
> > > ASSERT_EXCLUSIVE_WRITER_END(var); \
> > > spin_unlock(lock); \
> > > }
> > >
> > > I admit that I haven't thought this thoroughly, but I think this works,
> > > and besides primitives like above can help the reader to understand the
> > > questions like: what this lock/preemption-off critical sections are
> > > protecting?
> >
> > I can't say anything about introducing even more macros. I'd say we
> > need at least a dozen use-cases or more and understand them, otherwise
> > we may end up with the wrong API that we can never take back.
> >
>
> Agreed, real use-cases are needed for the justification of introducing
> those APIs.
>
> > > Thoughts?
> >
> > Makes sense for the cases you described.
> >
> > Changing KCSAN to do this is a major change. On surface, it seems like
> > a refactor and exporting some existing functionality, but there are
> > various new corner cases, because now 2 accesses don't really have to
> > be concurrent anymore to detect a race (and simple properties like a
> > thread can't race with itself need to be taken care of). The existing
> > ASSERT_EXCLUSIVE macros were able to leverage existing functionality
> > mostly as-is. So, to motivate something like this, we need at least a
> > dozen or so good use-cases, where careful placement of an existing
> > ASSERT_EXCLUSIVE would not catch what you describe.
> >
>
> Right, I think at this point, I'm not object to merging this into
> kernel, using ASSERT_EXCLUSIVE_*() does provide more chances for us to
> catch bugs. That said, I think it's better if we have some comments
> describing the semantics (or the limitation) of the annotations to avoid
> "mis-use"s (for example, using multiple ASSERT_EXCLUSIVE_WRITER()s for
> one variables in a function). But that doesn't necessarily block the
> merge of this feature, we can always do that later.
>
> Also, I think it's worthwhile to do some experiments on the
> *_{BEGIN,END} interfaces. If you're interested and have cycles to work
> on this, please let me, othwerwise, I can have a look at it.
Because I really think the BEGIN/END interface is error-prone, I was
curious if I could make this work:
preempt_disable();
{
ASSERT_EXCLUSIVE_WRITER_SCOPED(var);
do_sth();
raw_cpu_write(var, 1);
do_sth_else();
}
preempt_enable();
Since all compilers that support TSAN instrumentation support
attribute "cleanup", this works for KCSAN. Half-baked patch:
https://github.com/melver/linux/commit/d5a510a80b9755909d8b2ccc7bcfdeac99fc0080
Since it's not too intrusive, I'd be fine including this. But I think
you have to come up with the use-cases. :-)
I can send the patch once I'm done with it.
Thanks,
-- Marco
> Thanks!
>
> Regards,
> Boqun
>
>
> > Thanks,
> > -- Marco
> >
> > > Regards,
> > > Boqun
> > >
> [...]
Powered by blists - more mailing lists