| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <TYAPR01MB45443DF63B9EF29054F7C41FD8C60@TYAPR01MB4544.jpnprd01.prod.outlook.com>
Date: Thu, 2 Apr 2020 10:16:57 +0000
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
To: "john.stultz@...aro.org" <john.stultz@...aro.org>
CC: "gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"rafael@...nel.org" <rafael@...nel.org>,
"iommu@...ts.linux-foundation.org" <iommu@...ts.linux-foundation.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: How to fix WARN from drivers/base/dd.c in next-20200401 if
CONFIG_MODULES=y?
Hi John,
I found an issue after applied the following patches:
---
64c775f driver core: Rename deferred_probe_timeout and make it global
0e9f8d0 driver core: Remove driver_deferred_probe_check_state_continue()
bec6c0e pinctrl: Remove use of driver_deferred_probe_check_state_continue()
e2cec7d driver core: Set deferred_probe_timeout to a longer default if CONFIG_MODULES is set
c8c43ce driver core: Fix driver_deferred_probe_check_state() logic
---
Before these patches, on my environment [1], some device drivers
which has iommus property output the following message when probing:
[ 3.222205] ravb e6800000.ethernet: ignoring dependency for device, assuming no driver
[ 3.257174] ravb e6800000.ethernet eth0: Base address at 0xe6800000, 2e:09:0a:02:eb:2d, IRQ 117.
So, since ravb driver is probed within 4 seconds, we can use NFS rootfs correctly.
However, after these patches are applied, since the patches are always waiting for 30 seconds
for of_iommu_configure() when IOMMU hardware is disabled, drivers/base/dd.c output WARN.
Also, since ravb cannot be probed for 30 seconds, we cannot use NFS rootfs anymore.
JFYI, I copied the kernel log to the end of this email.
I guess the patches will be merged into v5.7-rc1 because the patches are contained from
next-20200316, I'd like to fix the issue in v5.7-rcN cycle somehow.
[1]
- R-Car H3 (r8a77951).
- Using defconfig of arch/arm64.
-- So, the IOMMU hardware of the environment is not enabled.
Best regards,
Yoshihiro Shimoda
--- log ---
[ 0.000162] NOTICE: BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.21
[ 0.005735] NOTICE: BL2: PRR is R-Car H3 Ver.3.0
[ 0.010412] NOTICE: BL2: Board is Salvator-XS Rev.1.0
[ 0.015532] NOTICE: BL2: Boot device is HyperFlash(160MHz)
[ 0.021054] NOTICE: BL2: LCM state is CM
[ 0.025100] NOTICE: BL2: AVS setting succeeded. DVFS_SetVID=0x53
[ 0.031085] NOTICE: BL2: CH0: 0x400000000 - 0x480000000, 2 GiB
[ 0.036956] NOTICE: BL2: CH1: 0x500000000 - 0x580000000, 2 GiB
[ 0.042840] NOTICE: BL2: CH2: 0x600000000 - 0x680000000, 2 GiB
[ 0.048725] NOTICE: BL2: CH3: 0x700000000 - 0x780000000, 2 GiB
[ 0.054650] NOTICE: BL2: DDR3200(rev.0.33)NOTICE: [COLD_BOOT]NOTICE: ..0
[ 0.100344] NOTICE: BL2: DRAM Split is 4ch(DDR f)
[ 0.104839] NOTICE: BL2: QoS is default setting(rev.0.07)
[ 0.110291] NOTICE: BL2: DRAM refresh interval 1.95 usec
[ 0.115720] NOTICE: BL2: v1.4(release):15dba6b
[ 0.120156] NOTICE: BL2: Built : 02:55:27, Sep 4 2018
[ 0.125352] NOTICE: BL2: Normal boot
[ 0.129004] NOTICE: BL2: dst=0xe6322d00 src=0x8180000 len=512(0x200)
[ 0.135395] NOTICE: BL2: dst=0x43f00000 src=0x8180400 len=6144(0x1800)
[ 0.142003] NOTICE: BL2: dst=0x44000000 src=0x81c0000 len=65536(0x10000)
[ 0.149012] NOTICE: BL2: dst=0x44100000 src=0x8200000 len=1048576(0x100000)
[ 0.159988] NOTICE: BL2: dst=0x50000000 src=0x8640000 len=1048576(0x100000)
U-Boot 2015.04 (Sep 04 2018 - 10:09:18)
CPU: Renesas Electronics R8A7795 rev 3.0
Board: Salvator-X
I2C: ready
DRAM: 7.9 GiB
Bank #0: 0x048000000 - 0x0bfffffff, 1.9 GiB
Bank #1: 0x500000000 - 0x57fffffff, 2 GiB
Bank #2: 0x600000000 - 0x67fffffff, 2 GiB
Bank #3: 0x700000000 - 0x77fffffff, 2 GiB
MMC: sh-sdhi: 0, sh-sdhi: 1, sh-sdhi: 2
In: serial
Out: serial
Err: serial
Net: ravb
Hit any key to stop autoboot: 2 1 0
ravb Waiting for PHY auto negotiation to complete..... done
ravb: 1000Base/Full
Using ravb device
TFTP from server 192.168.10.111; our IP address is 192.168.10.224
Filename 'lava/775/tftp-deploy-8205xjm0/kernel/Image'.
Load address: 0x48080000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##########################################################
3.2 MiB/s
done
Bytes transferred = 29467136 (1c1a200 hex)
ravb:0 is connected to ravb. Reconnecting to ravb
ravb Waiting for PHY auto negotiation to complete... done
ravb: 1000Base/Full
Using ravb device
TFTP from server 192.168.10.111; our IP address is 192.168.10.224
Filename 'lava/775/tftp-deploy-8205xjm0/dtb/r8a77951-salvator-xs.dtb'.
Load address: 0x48000000
Loading: * #####
6.9 MiB/s
done
Bytes transferred = 72290 (11a62 hex)
## Flattened Device Tree blob at 48000000
Booting using the fdt blob at 0x48000000
Loading Device Tree to 00000000bfe3c000, end 00000000bfe50a61 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd073]
[ 0.000000] Linux version 5.6.0-next-20200401 (root@...66f1d7ca7) (gcc version 7.3.0 (GCC)) #1203 SMP PREEMPT Wed Apr 1 07:54:21 UTC 2020
[ 0.000000] Machine model: Renesas Salvator-X 2nd version board based on r8a77951
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 32 MiB at 0x00000000bdc00000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000048000000-0x000000077fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x77efd9100-0x77efdafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000048000000-0x000000007fffffff]
[ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000077fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000048000000-0x00000000bfffffff]
[ 0.000000] node 0: [mem 0x0000000500000000-0x000000057fffffff]
[ 0.000000] node 0: [mem 0x0000000600000000-0x000000067fffffff]
[ 0.000000] node 0: [mem 0x0000000700000000-0x000000077fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000048000000-0x000000077fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS resident on physical CPU 0x0
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 23 pages/cpu s53848 r8192 d32168 u94208
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: EL2 vector hardening
[ 0.000000] CPU features: detected: ARM erratum 1319367
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2032128
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: console=ttySC0,115200 rw root=/dev/nfs nfsroot=192.168.10.111:/data/tftpboot/lava/775/extract-nfsrootfs-ymjrkbkv,tcp ip=192.168.10.224
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x7bfff000-0x7ffff000] (64MB)
[ 0.000000] Memory: 7968848K/8257536K available (13884K kernel code, 2088K rwdata, 7272K rodata, 5504K init, 485K bss, 255920K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] random: get_random_bytes called from start_kernel+0x2b0/0x488 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 8.32MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1eb398c07, max_idle_ns: 440795202503 ns
[ 0.000003] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255503ns
[ 0.000169] Console: colour dummy device 80x25
[ 0.000234] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.64 BogoMIPS (lpj=33280)
[ 0.000242] pid_max: default: 32768 minimum: 301
[ 0.000296] LSM: Security Framework initializing
[ 0.000373] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.000417] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.001691] rcu: Hierarchical SRCU implementation.
[ 0.003021] Detected Renesas R-Car Gen3 r8a7795 ES3.0
[ 0.004669] EFI services will not be available.
[ 0.004960] smp: Bringing up secondary CPUs ...
[ 0.005349] Detected PIPT I-cache on CPU1
[ 0.005391] CPU1: Booted secondary processor 0x0000000001 [0x411fd073]
[ 0.005810] Detected PIPT I-cache on CPU2
[ 0.005833] CPU2: Booted secondary processor 0x0000000002 [0x411fd073]
[ 0.006217] Detected PIPT I-cache on CPU3
[ 0.006239] CPU3: Booted secondary processor 0x0000000003 [0x411fd073]
[ 0.006618] CPU features: detected: ARM erratum 845719
[ 0.006630] Detected VIPT I-cache on CPU4
[ 0.006672] CPU4: Booted secondary processor 0x0000000100 [0x410fd034]
[ 0.007110] Detected VIPT I-cache on CPU5
[ 0.007134] CPU5: Booted secondary processor 0x0000000101 [0x410fd034]
[ 0.007530] Detected VIPT I-cache on CPU6
[ 0.007555] CPU6: Booted secondary processor 0x0000000102 [0x410fd034]
[ 0.007956] Detected VIPT I-cache on CPU7
[ 0.007981] CPU7: Booted secondary processor 0x0000000103 [0x410fd034]
[ 0.008063] smp: Brought up 1 node, 8 CPUs
[ 0.008083] SMP: Total of 8 processors activated.
[ 0.008088] CPU features: detected: 32-bit EL0 Support
[ 0.008093] CPU features: detected: CRC32 instructions
[ 0.019757] CPU: All CPU(s) started at EL1
[ 0.019790] alternatives: patching kernel code
[ 0.021027] devtmpfs: initialized
[ 0.026319] KASLR disabled due to lack of seed
[ 0.026621] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.026634] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.027243] pinctrl core: initialized pinctrl subsystem
[ 0.028574] thermal_sys: Registered thermal governor 'step_wise'
[ 0.028576] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.028970] DMI not present or invalid.
[ 0.029370] NET: Registered protocol family 16
[ 0.030139] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.030149] audit: initializing netlink subsys (disabled)
[ 0.030267] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1
[ 0.031359] cpuidle: using governor menu
[ 0.031545] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.031650] ASID allocator initialised with 65536 entries
[ 0.032694] Serial: AMBA PL011 UART driver
[ 0.035447] sh-pfc e6060000.pin-controller: r8a77951_pfc support registered
[ 0.058967] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.058973] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.058978] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.058982] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.060856] cryptd: max_cpu_qlen set to 1000
[ 0.064219] ACPI: Interpreter disabled.
[ 0.068145] iommu: Default domain type: Translated
[ 0.068385] vgaarb: loaded
[ 0.068571] SCSI subsystem initialized
[ 0.068810] usbcore: registered new interface driver usbfs
[ 0.068829] usbcore: registered new interface driver hub
[ 0.068875] usbcore: registered new device driver usb
[ 0.069926] i2c-sh_mobile e60b0000.i2c: I2C adapter 7, bus speed 400000 Hz
[ 0.070284] pps_core: LinuxPPS API ver. 1 registered
[ 0.070288] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@...ux.it>
[ 0.070297] PTP clock support registered
[ 0.070431] EDAC MC: Ver: 3.0.0
[ 0.071989] FPGA manager framework
[ 0.072042] Advanced Linux Sound Architecture Driver Initialized.
[ 0.072546] clocksource: Switched to clocksource arch_sys_counter
[ 0.072696] VFS: Disk quotas dquot_6.6.0
[ 0.072737] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.072853] pnp: PnP ACPI: disabled
[ 0.076113] NET: Registered protocol family 2
[ 0.076352] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.076413] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.076709] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.077264] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.077375] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.077482] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.077707] NET: Registered protocol family 1
[ 0.078025] RPC: Registered named UNIX socket transport module.
[ 0.078030] RPC: Registered udp transport module.
[ 0.078033] RPC: Registered tcp transport module.
[ 0.078036] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.078044] PCI: CLS 0 bytes, default 64
[ 0.078840] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.079073] hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 counters available
[ 0.079624] kvm [1]: HYP mode not available
[ 0.085109] Initialise system trusted keyrings
[ 0.085206] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[ 0.088591] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.089018] NFS: Registering the id_resolver key type
[ 0.089034] Key type id_resolver registered
[ 0.089037] Key type id_legacy registered
[ 0.089046] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.089136] 9p: Installing v9fs 9p2000 file system support
[ 0.098755] Key type asymmetric registered
[ 0.098761] Asymmetric key parser 'x509' registered
[ 0.098784] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.098790] io scheduler mq-deadline registered
[ 0.098793] io scheduler kyber registered
[ 0.112322] gpio_rcar e6050000.gpio: driving 16 GPIOs
[ 0.112509] gpio_rcar e6051000.gpio: driving 29 GPIOs
[ 0.112715] gpio_rcar e6052000.gpio: driving 15 GPIOs
[ 0.112890] gpio_rcar e6053000.gpio: driving 16 GPIOs
[ 0.113061] gpio_rcar e6054000.gpio: driving 18 GPIOs
[ 0.113231] gpio_rcar e6055000.gpio: driving 26 GPIOs
[ 0.113406] gpio_rcar e6055400.gpio: driving 32 GPIOs
[ 0.113575] gpio_rcar e6055800.gpio: driving 4 GPIOs
[ 0.115254] rcar-pcie fe000000.pcie: host bridge /soc/pcie@...00000 ranges:
[ 0.115274] rcar-pcie fe000000.pcie: IO 0x00fe100000..0x00fe1fffff -> 0x0000000000
[ 0.115290] rcar-pcie fe000000.pcie: MEM 0x00fe200000..0x00fe3fffff -> 0x00fe200000
[ 0.115304] rcar-pcie fe000000.pcie: MEM 0x0030000000..0x0037ffffff -> 0x0030000000
[ 0.115313] rcar-pcie fe000000.pcie: MEM 0x0038000000..0x003fffffff -> 0x0038000000
[ 0.115324] rcar-pcie fe000000.pcie: IB MEM 0x0040000000..0x007fffffff -> 0x0040000000
[ 0.180068] rcar-pcie fe000000.pcie: PCIe link down
[ 0.180207] rcar-pcie ee800000.pcie: host bridge /soc/pcie@...00000 ranges:
[ 0.180223] rcar-pcie ee800000.pcie: IO 0x00ee900000..0x00ee9fffff -> 0x0000000000
[ 0.180238] rcar-pcie ee800000.pcie: MEM 0x00eea00000..0x00eebfffff -> 0x00eea00000
[ 0.180250] rcar-pcie ee800000.pcie: MEM 0x00c0000000..0x00c7ffffff -> 0x00c0000000
[ 0.180259] rcar-pcie ee800000.pcie: MEM 0x00c8000000..0x00cfffffff -> 0x00c8000000
[ 0.180269] rcar-pcie ee800000.pcie: IB MEM 0x0040000000..0x007fffffff -> 0x0040000000
[ 0.244057] rcar-pcie ee800000.pcie: PCIe link down
[ 0.246298] EINJ: ACPI disabled.
[ 0.261318] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.263436] SuperH (H)SCI(F) driver initialized
[ 0.263828] e6550000.serial: ttySC1 at MMIO 0xe6550000 (irq = 34, base_baud = 0) is a hscif
[ 0.264299] e6e88000.serial: ttySC0 at MMIO 0xe6e88000 (irq = 120, base_baud = 0) is a scif
[ 1.294234] printk: console [ttySC0] enabled
[ 1.299351] msm_serial: driver initialized
[ 1.311162] loop: module loaded
[ 1.315557] megasas: 07.713.01.00-rc1
[ 1.324653] libphy: Fixed MDIO Bus: probed
[ 1.329073] tun: Universal TUN/TAP device driver, 1.6
[ 1.335038] thunder_xcv, ver 1.0
[ 1.338289] thunder_bgx, ver 1.0
[ 1.341529] nicpf, ver 1.0
[ 1.345449] hclge is initializing
[ 1.348797] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 1.356020] hns3: Copyright (c) 2017 Huawei Corporation.
[ 1.361357] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.368404] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.374169] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.380000] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.385937] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 1.392896] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.398488] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 1.406317] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.412622] sky2: driver version 1.30
[ 1.417571] VFIO - User Level meta-driver version: 0.3
[ 1.424618] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.431147] ehci-pci: EHCI PCI platform driver
[ 1.435606] ehci-platform: EHCI generic platform driver
[ 1.441177] ehci-platform ee0a0100.usb: EHCI Host Controller
[ 1.446855] ehci-platform ee0a0100.usb: new USB bus registered, assigned bus number 1
[ 1.454779] ehci-platform ee0a0100.usb: irq 166, io mem 0xee0a0100
[ 1.476556] ehci-platform ee0a0100.usb: USB 2.0 started, EHCI 1.10
[ 1.483074] hub 1-0:1.0: USB hub found
[ 1.486840] hub 1-0:1.0: 1 port detected
[ 1.491058] ehci-platform ee0c0100.usb: EHCI Host Controller
[ 1.496727] ehci-platform ee0c0100.usb: new USB bus registered, assigned bus number 2
[ 1.504606] ehci-platform ee0c0100.usb: irq 167, io mem 0xee0c0100
[ 1.524553] ehci-platform ee0c0100.usb: USB 2.0 started, EHCI 1.10
[ 1.530993] hub 2-0:1.0: USB hub found
[ 1.534757] hub 2-0:1.0: 1 port detected
[ 1.564598] ehci-platform ee0e0100.usb: EHCI Host Controller
[ 1.570273] ehci-platform ee0e0100.usb: new USB bus registered, assigned bus number 3
[ 1.578157] ehci-platform ee0e0100.usb: irq 168, io mem 0xee0e0100
[ 1.596553] ehci-platform ee0e0100.usb: USB 2.0 started, EHCI 1.10
[ 1.602996] hub 3-0:1.0: USB hub found
[ 1.606761] hub 3-0:1.0: 1 port detected
[ 1.610938] ehci-orion: EHCI orion driver
[ 1.615160] ehci-exynos: EHCI Exynos driver
[ 1.619443] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.625635] ohci-pci: OHCI PCI platform driver
[ 1.630110] ohci-platform: OHCI generic platform driver
[ 1.635592] ohci-platform ee0a0000.usb: Generic Platform OHCI controller
[ 1.642308] ohci-platform ee0a0000.usb: new USB bus registered, assigned bus number 4
[ 1.650177] ohci-platform ee0a0000.usb: irq 166, io mem 0xee0a0000
[ 1.743513] hub 4-0:1.0: USB hub found
[ 1.747279] hub 4-0:1.0: 1 port detected
[ 1.751412] ohci-platform ee0c0000.usb: Generic Platform OHCI controller
[ 1.758121] ohci-platform ee0c0000.usb: new USB bus registered, assigned bus number 5
[ 1.765985] ohci-platform ee0c0000.usb: irq 167, io mem 0xee0c0000
[ 1.859402] hub 5-0:1.0: USB hub found
[ 1.863166] hub 5-0:1.0: 1 port detected
[ 1.867306] ohci-platform ee0e0000.usb: Generic Platform OHCI controller
[ 1.874015] ohci-platform ee0e0000.usb: new USB bus registered, assigned bus number 6
[ 1.881877] ohci-platform ee0e0000.usb: irq 168, io mem 0xee0e0000
[ 1.975344] hub 6-0:1.0: USB hub found
[ 1.979111] hub 6-0:1.0: 1 port detected
[ 1.983257] ohci-exynos: OHCI Exynos driver
[ 1.988017] xhci-hcd ee000000.usb: xHCI Host Controller
[ 1.993250] xhci-hcd ee000000.usb: new USB bus registered, assigned bus number 7
[ 2.000693] xhci-hcd ee000000.usb: Direct firmware load for r8a779x_usb3_v3.dlmem failed with error -2
[ 2.010013] xhci-hcd ee000000.usb: can't setup: -2
[ 2.014812] xhci-hcd ee000000.usb: USB bus 7 deregistered
[ 2.020242] xhci-hcd: probe of ee000000.usb failed with error -2
[ 2.026644] usbcore: registered new interface driver usb-storage
[ 2.035603] i2c /dev entries driver
[ 2.047518] cs2000-cp 2-004f: revision - C1
[ 2.051753] i2c-rcar e6510000.i2c: probed
[ 2.056144] pca953x 4-0020: supply vcc not found, using dummy regulator
[ 2.063577] GPIO line 355 (PCIE/SATA switch) hogged as output/low
[ 2.075409] random: fast init done
[ 2.079190] i2c-rcar e66d8000.i2c: probed
[ 2.090506] rcar_gen3_thermal e6198000.thermal: TSC0: Loaded 1 trip points
[ 2.101529] rcar_gen3_thermal e6198000.thermal: TSC1: Loaded 1 trip points
[ 2.112534] rcar_gen3_thermal e6198000.thermal: TSC2: Loaded 2 trip points
[ 2.122193] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0
[ 2.132201] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 2 >= em_cap_state1
[ 2.142322] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1497600 KHz
[ 2.149748] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[ 2.158590] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0
[ 2.168594] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 2 >= em_cap_state1
[ 2.178680] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 1198080 KHz
[ 2.186389] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 1200000 KHz
[ 2.197031] sdhci: Secure Digital Host Controller Interface driver
[ 2.203212] sdhci: Copyright(c) Pierre Ossman
[ 2.208869] Synopsys Designware Multimedia Card Interface Driver
[ 2.216058] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.223625] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.230967] usbcore: registered new interface driver usbhid
[ 2.236542] usbhid: USB HID core driver
[ 2.245206] NET: Registered protocol family 17
[ 2.249772] 9pnet: Installing 9P2000 support
[ 2.254076] Key type dns_resolver registered
[ 2.258678] registered taskstats version 1
[ 2.262783] Loading compiled-in X.509 certificates
[ 2.276809] renesas_irqc e61c0000.interrupt-controller: driving 6 irqs
[ 2.292451] bd9571mwv 7-0030: Device: BD9571MWV rev. 4
[ 2.336574] ehci-platform ee080100.usb: EHCI Host Controller
[ 2.342251] ehci-platform ee080100.usb: new USB bus registered, assigned bus number 7
[ 2.350131] ehci-platform ee080100.usb: irq 165, io mem 0xee080100
[ 2.408559] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 2.424555] ehci-platform ee080100.usb: USB 2.0 started, EHCI 1.10
[ 2.431198] hub 7-0:1.0: USB hub found
[ 2.434963] hub 7-0:1.0: 1 port detected
[ 2.439734] ohci-platform ee080000.usb: Generic Platform OHCI controller
[ 2.442742] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 2.446449] ohci-platform ee080000.usb: new USB bus registered, assigned bus number 8
[ 2.453488] scsi host0: usb-storage 1-1:1.0
[ 2.460403] ohci-platform ee080000.usb: irq 165, io mem 0xee080000
[ 2.559603] hub 8-0:1.0: USB hub found
[ 2.563370] hub 8-0:1.0: 1 port detected
[ 2.581397] input: keys as /devices/platform/keys/input/input0
[ 3.493831] scsi 0:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
[ 3.503554] sd 0:0:0:0: [sda] 121307136 512-byte logical blocks: (62.1 GB/57.8 GiB)
[ 3.512657] sd 0:0:0:0: [sda] Write Protect is off
[ 3.518524] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.617985] sda: sda1
[ 3.624341] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 14.884990] ALSA device list:
[ 14.887961] No soundcards found.
[ 33.765863] ------------[ cut here ]------------
[ 33.770490] renesas_sdhi_internal_dmac ee100000.sd: deferred probe timeout, ignoring dependency
[ 33.770538] WARNING: CPU: 3 PID: 194 at ../drivers/base/dd.c:270 driver_deferred_probe_check_state+0x48/0x68
[ 33.789044] Modules linked in:
[ 33.792096] CPU: 3 PID: 194 Comm: kworker/3:2 Not tainted 5.6.0-next-20200401 #1203
[ 33.799744] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[ 33.807657] Workqueue: events deferred_probe_work_func
[ 33.812789] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 33.817573] pc : driver_deferred_probe_check_state+0x48/0x68
[ 33.823225] lr : driver_deferred_probe_check_state+0x48/0x68
[ 33.828875] sp : ffff8000121cba70
[ 33.832182] x29: ffff8000121cba70 x28: 0000000000000000
[ 33.837487] x27: ffff000734cc51b8 x26: ffff800011ca6cd0
[ 33.842792] x25: ffff8000113c4150 x24: ffff8000113c4160
[ 33.848096] x23: ffff00073f01dbf8 x22: ffff0007355d0410
[ 33.853401] x21: 0000000000000000 x20: ffff8000121cbb28
[ 33.858705] x19: ffff0007355d0410 x18: ffffffffffffffff
[ 33.864009] x17: 0000000000000020 x16: ffff800010ef5118
[ 33.869313] x15: ffff800011a99948 x14: 202c74756f656d69
[ 33.874618] x13: 742065626f727020 x12: 6465727265666564
[ 33.879922] x11: 203a64732e303030 x10: ffff800011caac10
[ 33.885226] x9 : 6d645f6c616e7265 x8 : 65646e6570656420
[ 33.890531] x7 : 676e69726f6e6769 x6 : ffff800011caa85b
[ 33.895835] x5 : 0000000000000000 x4 : 0000000000000000
[ 33.901139] x3 : 00000000ffffffff x2 : ffff80072d8d4000
[ 33.906444] x1 : c105309b57ee0b00 x0 : 0000000000000000
[ 33.911748] Call trace:
[ 33.914190] driver_deferred_probe_check_state+0x48/0x68
[ 33.919497] of_iommu_xlate+0xd8/0xe8
[ 33.923153] of_iommu_configure+0xdc/0x228
[ 33.927246] of_dma_configure+0xd8/0x218
[ 33.931162] platform_dma_configure+0x1c/0xa8
[ 33.935512] really_probe+0xd4/0x378
[ 33.939080] driver_probe_device+0x5c/0x110
[ 33.943256] __device_attach_driver+0x9c/0xc0
[ 33.947606] bus_for_each_drv+0x68/0xd0
[ 33.951435] __device_attach+0xe0/0x148
[ 33.955264] device_initial_probe+0x14/0x20
[ 33.959440] bus_probe_device+0x9c/0xa8
[ 33.963268] deferred_probe_work_func+0x74/0xb0
[ 33.967795] process_one_work+0x1ec/0x368
[ 33.971797] worker_thread+0x20c/0x490
[ 33.975539] kthread+0x150/0x158
[ 33.978761] ret_from_fork+0x10/0x18
[ 33.982329] ---[ end trace 03534809175888cc ]---
[ 33.987087] renesas_sdhi_internal_dmac ee100000.sd: Got CD GPIO
[ 33.993025] renesas_sdhi_internal_dmac ee100000.sd: Got WP GPIO
[ 34.047656] renesas_sdhi_internal_dmac ee100000.sd: mmc0 base at 0xee100000 max clock rate 200 MHz
[ 34.057858] ------------[ cut here ]------------
[ 34.062480] renesas_sdhi_internal_dmac ee140000.sd: deferred probe timeout, ignoring dependency
[ 34.062527] WARNING: CPU: 3 PID: 194 at ../drivers/base/dd.c:270 driver_deferred_probe_check_state+0x48/0x68
[ 34.081031] Modules linked in:
[ 34.084081] CPU: 3 PID: 194 Comm: kworker/3:2 Tainted: G W 5.6.0-next-20200401 #1203
[ 34.093118] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[ 34.101029] Workqueue: events deferred_probe_work_func
[ 34.106161] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 34.110945] pc : driver_deferred_probe_check_state+0x48/0x68
[ 34.116597] lr : driver_deferred_probe_check_state+0x48/0x68
[ 34.122248] sp : ffff8000121cba70
[ 34.125555] x29: ffff8000121cba70 x28: 0000000000000000
[ 34.130860] x27: ffff000734cc51b8 x26: ffff800011ca6cd0
[ 34.136164] x25: ffff8000113c4150 x24: ffff8000113c4160
[ 34.141469] x23: ffff00073f01e8b8 x22: ffff0007355d0810
[ 34.146774] x21: 0000000000000000 x20: ffff8000121cbb28
[ 34.152078] x19: ffff0007355d0810 x18: ffffffffffffffff
[ 34.157382] x17: 0000000000000020 x16: ffff800010ef5118
[ 34.162687] x15: ffff800011a99948 x14: 202c74756f656d69
[ 34.167991] x13: 742065626f727020 x12: 6465727265666564
[ 34.173295] x11: 203a64732e303030 x10: ffff800011caac10
[ 34.178599] x9 : 6d645f6c616e7265 x8 : 65646e6570656420
[ 34.183903] x7 : 676e69726f6e6769 x6 : ffff800011caa85b
[ 34.189208] x5 : 0000000000000000 x4 : 0000000000000000
[ 34.194512] x3 : 00000000ffffffff x2 : ffff80072d8d4000
[ 34.199816] x1 : c105309b57ee0b00 x0 : 0000000000000000
[ 34.205120] Call trace:
[ 34.207561] driver_deferred_probe_check_state+0x48/0x68
[ 34.212867] of_iommu_xlate+0xd8/0xe8
[ 34.216522] of_iommu_configure+0xdc/0x228
[ 34.220613] of_dma_configure+0xd8/0x218
[ 34.224530] platform_dma_configure+0x1c/0xa8
[ 34.228879] really_probe+0xd4/0x378
[ 34.232447] driver_probe_device+0x5c/0x110
[ 34.236623] __device_attach_driver+0x9c/0xc0
[ 34.240973] bus_for_each_drv+0x68/0xd0
[ 34.244802] __device_attach+0xe0/0x148
[ 34.248631] device_initial_probe+0x14/0x20
[ 34.252806] bus_probe_device+0x9c/0xa8
[ 34.256634] deferred_probe_work_func+0x74/0xb0
[ 34.261160] process_one_work+0x1ec/0x368
[ 34.265161] worker_thread+0x20c/0x490
[ 34.268904] kthread+0x150/0x158
[ 34.272126] ret_from_fork+0x10/0x18
[ 34.275694] ---[ end trace 03534809175888cd ]---
[ 34.328930] renesas_sdhi_internal_dmac ee140000.sd: mmc1 base at 0xee140000 max clock rate 200 MHz
[ 34.338891] ------------[ cut here ]------------
[ 34.343512] renesas_sdhi_internal_dmac ee160000.sd: deferred probe timeout, ignoring dependency
[ 34.343553] WARNING: CPU: 3 PID: 194 at ../drivers/base/dd.c:270 driver_deferred_probe_check_state+0x48/0x68
[ 34.362058] Modules linked in:
[ 34.365107] CPU: 3 PID: 194 Comm: kworker/3:2 Tainted: G W 5.6.0-next-20200401 #1203
[ 34.374143] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[ 34.382054] Workqueue: events deferred_probe_work_func
[ 34.387186] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 34.391970] pc : driver_deferred_probe_check_state+0x48/0x68
[ 34.397621] lr : driver_deferred_probe_check_state+0x48/0x68
[ 34.403272] sp : ffff8000121cba70
[ 34.406578] x29: ffff8000121cba70 x28: 0000000000000000
[ 34.411884] x27: ffff000734cc51b8 x26: ffff800011ca6cd0
[ 34.417189] x25: ffff8000113c4150 x24: ffff8000113c4160
[ 34.422493] x23: ffff00073f01f0f8 x22: ffff0007355d0c10
[ 34.427797] x21: 0000000000000000 x20: ffff8000121cbb28
[ 34.433102] x19: ffff0007355d0c10 x18: ffffffffffffffff
[ 34.438406] x17: 0000000000000020 x16: ffff800010ef5118
[ 34.443710] x15: ffff800011a99948 x14: 202c74756f656d69
[ 34.449015] x13: 742065626f727020 x12: 6465727265666564
[ 34.454319] x11: 203a64732e303030 x10: ffff800011caac10
[ 34.459623] x9 : 6d645f6c616e7265 x8 : 65646e6570656420
[ 34.464928] x7 : 676e69726f6e6769 x6 : ffff800011caa85b
[ 34.470232] x5 : 0000000000000000 x4 : 0000000000000000
[ 34.475536] x3 : 00000000ffffffff x2 : ffff80072d8d4000
[ 34.480840] x1 : c105309b57ee0b00 x0 : 0000000000000000
[ 34.486145] Call trace:
[ 34.488586] driver_deferred_probe_check_state+0x48/0x68
[ 34.493892] of_iommu_xlate+0xd8/0xe8
[ 34.497547] of_iommu_configure+0xdc/0x228
[ 34.501637] of_dma_configure+0xd8/0x218
[ 34.505554] platform_dma_configure+0x1c/0xa8
[ 34.509903] really_probe+0xd4/0x378
[ 34.513471] driver_probe_device+0x5c/0x110
[ 34.517648] __device_attach_driver+0x9c/0xc0
[ 34.521997] bus_for_each_drv+0x68/0xd0
[ 34.525825] __device_attach+0xe0/0x148
[ 34.529654] device_initial_probe+0x14/0x20
[ 34.533830] bus_probe_device+0x9c/0xa8
[ 34.537659] deferred_probe_work_func+0x74/0xb0
[ 34.542183] process_one_work+0x1ec/0x368
[ 34.546186] worker_thread+0x20c/0x490
[ 34.549928] kthread+0x150/0x158
[ 34.553149] ret_from_fork+0x10/0x18
[ 34.556716] ---[ end trace 03534809175888ce ]---
[ 34.561463] renesas_sdhi_internal_dmac ee160000.sd: Got CD GPIO
[ 34.567414] renesas_sdhi_internal_dmac ee160000.sd: Got WP GPIO
[ 34.603185] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[ 34.610327] mmcblk0: mmc0:aaaa AGGCD 29.7 GiB
[ 34.618045] mmcblk0: p1
[ 34.627845] renesas_sdhi_internal_dmac ee160000.sd: mmc2 base at 0xee160000 max clock rate 200 MHz
[ 34.637484] ------------[ cut here ]------------
[ 34.642117] rcar-dmac e6700000.dma-controller: deferred probe timeout, ignoring dependency
[ 34.642159] WARNING: CPU: 3 PID: 194 at ../drivers/base/dd.c:270 driver_deferred_probe_check_state+0x48/0x68
[ 34.660230] Modules linked in:
[ 34.663281] CPU: 3 PID: 194 Comm: kworker/3:2 Tainted: G W 5.6.0-next-20200401 #1203
[ 34.672317] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[ 34.680229] Workqueue: events deferred_probe_work_func
[ 34.685361] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 34.690145] pc : driver_deferred_probe_check_state+0x48/0x68
[ 34.695797] lr : driver_deferred_probe_check_state+0x48/0x68
[ 34.701447] sp : ffff8000121cba70
[ 34.704754] x29: ffff8000121cba70 x28: 0000000000000000
[ 34.710060] x27: ffff000734cc51b8 x26: ffff800011ca6cd0
[ 34.715364] x25: ffff8000113c4150 x24: ffff8000113c4160
[ 34.720669] x23: ffff00073eff8158 x22: ffff00073552c410
[ 34.725973] x21: 0000000000000000 x20: ffff8000121cbb28
[ 34.731277] x19: ffff00073552c410 x18: ffffffffffffffff
[ 34.736582] x17: 0000000000000020 x16: 0000000000000001
[ 34.741886] x15: 0000261a1afe96aa x14: 726f6e6769202c74
[ 34.747190] x13: 756f656d69742065 x12: 626f727020646572
[ 34.752495] x11: 7265666564203a72 x10: ffff800011caac10
[ 34.757799] x9 : 632d616d642e3030 x8 : 3030303736652063
[ 34.763103] x7 : 616d642d72616372 x6 : ffff800011caa856
[ 34.768408] x5 : 0000000000000000 x4 : 0000000000000000
[ 34.773712] x3 : 00000000ffffffff x2 : ffff80072d8d4000
[ 34.779016] x1 : c105309b57ee0b00 x0 : 0000000000000000
[ 34.784321] Call trace:
[ 34.786762] driver_deferred_probe_check_state+0x48/0x68
[ 34.792068] of_iommu_xlate+0xd8/0xe8
[ 34.795723] of_iommu_configure+0xdc/0x228
[ 34.799816] of_dma_configure+0xd8/0x218
[ 34.803732] platform_dma_configure+0x1c/0xa8
[ 34.808082] really_probe+0xd4/0x378
[ 34.811650] driver_probe_device+0x5c/0x110
[ 34.815825] __device_attach_driver+0x9c/0xc0
[ 34.820175] bus_for_each_drv+0x68/0xd0
[ 34.824004] __device_attach+0xe0/0x148
[ 34.827833] device_initial_probe+0x14/0x20
[ 34.832008] bus_probe_device+0x9c/0xa8
[ 34.835837] deferred_probe_work_func+0x74/0xb0
[ 34.840360] process_one_work+0x1ec/0x368
[ 34.844362] worker_thread+0x20c/0x490
[ 34.848105] kthread+0x150/0x158
[ 34.851328] ret_from_fork+0x10/0x18
[ 34.854896] ---[ end trace 03534809175888cf ]---
[ 34.862804] ------------[ cut here ]------------
[ 34.867430] rcar-dmac e7300000.dma-controller: deferred probe timeout, ignoring dependency
[ 34.867478] WARNING: CPU: 3 PID: 194 at ../drivers/base/dd.c:270 driver_deferred_probe_check_state+0x48/0x68
[ 34.885549] Modules linked in:
[ 34.888600] CPU: 3 PID: 194 Comm: kworker/3:2 Tainted: G W 5.6.0-next-20200401 #1203
[ 34.897637] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[ 34.905548] Workqueue: events deferred_probe_work_func
[ 34.910681] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 34.915464] pc : driver_deferred_probe_check_state+0x48/0x68
[ 34.921116] lr : driver_deferred_probe_check_state+0x48/0x68
[ 34.926767] sp : ffff8000121cba70
[ 34.930074] x29: ffff8000121cba70 x28: 0000000000000000
[ 34.935379] x27: ffff000734cc51b8 x26: ffff800011ca6cd0
[ 34.940684] x25: ffff8000113c4150 x24: ffff8000113c4160
[ 34.945988] x23: ffff00073eff8708 x22: ffff00073552c810
[ 34.951293] x21: 0000000000000000 x20: ffff8000121cbb28
[ 34.956597] x19: ffff00073552c810 x18: ffffffffffffffff
[ 34.961901] x17: 00000000000000c0 x16: fffffe001cb28a88
[ 34.967206] x15: ffff800011a99948 x14: 726f6e6769202c74
[ 34.972509] x13: 756f656d69742065 x12: 626f727020646572
[ 34.977814] x11: 7265666564203a72 x10: ffff800011caac10
[ 34.983118] x9 : 632d616d642e3030 x8 : 3030303337652063
[ 34.988422] x7 : 616d642d72616372 x6 : ffff800011caa856
[ 34.993726] x5 : 0000000000000000 x4 : 0000000000000000
[ 34.999031] x3 : 00000000ffffffff x2 : ffff80072d8d4000
[ 35.004335] x1 : c105309b57ee0b00 x0 : 0000000000000000
[ 35.009640] Call trace:
[ 35.012080] driver_deferred_probe_check_state+0x48/0x68
[ 35.017386] of_iommu_xlate+0xd8/0xe8
[ 35.021041] of_iommu_configure+0xdc/0x228
[ 35.025132] of_dma_configure+0xd8/0x218
[ 35.029049] platform_dma_configure+0x1c/0xa8
[ 35.033398] really_probe+0xd4/0x378
[ 35.036966] driver_probe_device+0x5c/0x110
[ 35.041142] __device_attach_driver+0x9c/0xc0
[ 35.045491] bus_for_each_drv+0x68/0xd0
[ 35.049320] __device_attach+0xe0/0x148
[ 35.053148] device_initial_probe+0x14/0x20
[ 35.057324] bus_probe_device+0x9c/0xa8
[ 35.061153] deferred_probe_work_func+0x74/0xb0
[ 35.065678] process_one_work+0x1ec/0x368
[ 35.069680] worker_thread+0x20c/0x490
[ 35.073421] kthread+0x150/0x158
[ 35.076644] ret_from_fork+0x10/0x18
[ 35.080211] ---[ end trace 03534809175888d0 ]---
[ 35.087228] ------------[ cut here ]------------
[ 35.091855] rcar-dmac e7310000.dma-controller: deferred probe timeout, ignoring dependency
[ 35.091898] WARNING: CPU: 3 PID: 194 at ../drivers/base/dd.c:270 driver_deferred_probe_check_state+0x48/0x68
[ 35.109969] Modules linked in:
[ 35.113018] CPU: 3 PID: 194 Comm: kworker/3:2 Tainted: G W 5.6.0-next-20200401 #1203
[ 35.122055] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[ 35.129966] Workqueue: events deferred_probe_work_func
[ 35.135098] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 35.139882] pc : driver_deferred_probe_check_state+0x48/0x68
[ 35.145534] lr : driver_deferred_probe_check_state+0x48/0x68
[ 35.151184] sp : ffff8000121cba70
[ 35.154491] x29: ffff8000121cba70 x28: 0000000000000000
[ 35.159796] x27: ffff000734cc51b8 x26: ffff800011ca6cd0
[ 35.165100] x25: ffff8000113c4150 x24: ffff8000113c4160
[ 35.170405] x23: ffff00073eff8cb8 x22: ffff00073552cc10
[ 35.175709] x21: 0000000000000000 x20: ffff8000121cbb28
[ 35.181013] x19: ffff00073552cc10 x18: ffffffffffffffff
[ 35.186318] x17: 00000000000000c0 x16: fffffe001cb28a88
[ 35.191622] x15: ffff800011a99948 x14: 726f6e6769202c74
[ 35.196926] x13: 756f656d69742065 x12: 626f727020646572
[ 35.202230] x11: 7265666564203a72 x10: ffff800011caac10
[ 35.207535] x9 : 632d616d642e3030 x8 : 3030313337652063
[ 35.212839] x7 : 616d642d72616372 x6 : ffff800011caa856
[ 35.218143] x5 : 0000000000000000 x4 : 0000000000000000
[ 35.223446] x3 : 00000000ffffffff x2 : ffff80072d8d4000
[ 35.228751] x1 : c105309b57ee0b00 x0 : 0000000000000000
[ 35.234055] Call trace:
[ 35.236495] driver_deferred_probe_check_state+0x48/0x68
[ 35.241802] of_iommu_xlate+0xd8/0xe8
[ 35.245457] of_iommu_configure+0xdc/0x228
[ 35.249547] of_dma_configure+0xd8/0x218
[ 35.253464] platform_dma_configure+0x1c/0xa8
[ 35.257813] really_probe+0xd4/0x378
[ 35.261382] driver_probe_device+0x5c/0x110
[ 35.265558] __device_attach_driver+0x9c/0xc0
[ 35.269907] bus_for_each_drv+0x68/0xd0
[ 35.273736] __device_attach+0xe0/0x148
[ 35.277564] device_initial_probe+0x14/0x20
[ 35.281739] bus_probe_device+0x9c/0xa8
[ 35.285568] deferred_probe_work_func+0x74/0xb0
[ 35.290093] process_one_work+0x1ec/0x368
[ 35.294094] worker_thread+0x20c/0x490
[ 35.297836] kthread+0x150/0x158
[ 35.301058] ret_from_fork+0x10/0x18
[ 35.304625] ---[ end trace 03534809175888d1 ]---
[ 35.311782] ------------[ cut here ]------------
[ 35.316445] rcar-dmac ec700000.dma-controller: deferred probe timeout, ignoring dependency
[ 35.316487] WARNING: CPU: 3 PID: 194 at ../drivers/base/dd.c:270 driver_deferred_probe_check_state+0x48/0x68
[ 35.334558] Modules linked in:
[ 35.337609] CPU: 3 PID: 194 Comm: kworker/3:2 Tainted: G W 5.6.0-next-20200401 #1203
[ 35.346645] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[ 35.354557] Workqueue: events deferred_probe_work_func
[ 35.359690] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 35.364474] pc : driver_deferred_probe_check_state+0x48/0x68
[ 35.370126] lr : driver_deferred_probe_check_state+0x48/0x68
[ 35.375777] sp : ffff8000121cba70
[ 35.379083] x29: ffff8000121cba70 x28: 0000000000000000
[ 35.384389] x27: ffff000734cc51b8 x26: ffff800011ca6cd0
[ 35.389693] x25: ffff8000113c4150 x24: ffff8000113c4160
[ 35.394998] x23: ffff00073f018998 x22: ffff00073557c410
[ 35.400302] x21: 0000000000000000 x20: ffff8000121cbb28
[ 35.405607] x19: ffff00073557c410 x18: ffffffffffffffff
[ 35.410911] x17: 00000000000000c0 x16: fffffe001cb28a88
[ 35.416215] x15: 0000002a2b34a012 x14: 726f6e6769202c74
[ 35.421520] x13: 756f656d69742065 x12: 626f727020646572
[ 35.426824] x11: 7265666564203a72 x10: ffff800011caac10
[ 35.432128] x9 : 632d616d642e3030 x8 : 3030303763652063
[ 35.437432] x7 : 616d642d72616372 x6 : ffff800011caa856
[ 35.442736] x5 : 0000000000000000 x4 : 0000000000000000
[ 35.448041] x3 : 00000000ffffffff x2 : ffff80072d8d4000
[ 35.453345] x1 : c105309b57ee0b00 x0 : 0000000000000000
[ 35.458650] Call trace:
[ 35.461091] driver_deferred_probe_check_state+0x48/0x68
[ 35.466397] of_iommu_xlate+0xd8/0xe8
[ 35.470052] of_iommu_configure+0xdc/0x228
[ 35.474143] of_dma_configure+0xd8/0x218
[ 35.478059] platform_dma_configure+0x1c/0xa8
[ 35.482408] really_probe+0xd4/0x378
[ 35.485976] driver_probe_device+0x5c/0x110
[ 35.490152] __device_attach_driver+0x9c/0xc0
[ 35.494501] bus_for_each_drv+0x68/0xd0
[ 35.498330] __device_attach+0xe0/0x148
[ 35.502159] device_initial_probe+0x14/0x20
[ 35.506334] bus_probe_device+0x9c/0xa8
[ 35.510163] deferred_probe_work_func+0x74/0xb0
[ 35.514688] process_one_work+0x1ec/0x368
[ 35.518690] worker_thread+0x20c/0x490
[ 35.522431] kthread+0x150/0x158
[ 35.525653] ret_from_fork+0x10/0x18
[ 35.529221] ---[ end trace 03534809175888d2 ]---
[ 35.536287] ------------[ cut here ]------------
[ 35.540939] rcar-dmac ec720000.dma-controller: deferred probe timeout, ignoring dependency
[ 35.540985] WARNING: CPU: 3 PID: 194 at ../drivers/base/dd.c:270 driver_deferred_probe_check_state+0x48/0x68
[ 35.559056] Modules linked in:
[ 35.562106] CPU: 3 PID: 194 Comm: kworker/3:2 Tainted: G W 5.6.0-next-20200401 #1203
[ 35.571142] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[ 35.579054] Workqueue: events deferred_probe_work_func
[ 35.584186] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 35.588970] pc : driver_deferred_probe_check_state+0x48/0x68
[ 35.594622] lr : driver_deferred_probe_check_state+0x48/0x68
[ 35.600273] sp : ffff8000121cba70
[ 35.603580] x29: ffff8000121cba70 x28: 0000000000000000
[ 35.608885] x27: ffff000734cc51b8 x26: ffff800011ca6cd0
[ 35.614190] x25: ffff8000113c4150 x24: ffff8000113c4160
[ 35.619494] x23: ffff00073f018f48 x22: ffff00073557c810
[ 35.624799] x21: 0000000000000000 x20: ffff8000121cbb28
[ 35.630103] x19: ffff00073557c810 x18: ffffffffffffffff
[ 35.635407] x17: 00000000000000c0 x16: fffffe001cb28a88
[ 35.640711] x15: ffff800011a99948 x14: 726f6e6769202c74
[ 35.646016] x13: 756f656d69742065 x12: 626f727020646572
[ 35.651320] x11: 7265666564203a72 x10: ffff800011caac10
[ 35.656624] x9 : 632d616d642e3030 x8 : 3030323763652063
[ 35.661929] x7 : 616d642d72616372 x6 : ffff800011caa856
[ 35.667233] x5 : 0000000000000000 x4 : 0000000000000000
[ 35.672537] x3 : 00000000ffffffff x2 : ffff80072d8d4000
[ 35.677841] x1 : c105309b57ee0b00 x0 : 0000000000000000
[ 35.683146] Call trace:
[ 35.685586] driver_deferred_probe_check_state+0x48/0x68
[ 35.690892] of_iommu_xlate+0xd8/0xe8
[ 35.694547] of_iommu_configure+0xdc/0x228
[ 35.698637] of_dma_configure+0xd8/0x218
[ 35.702553] platform_dma_configure+0x1c/0xa8
[ 35.706903] really_probe+0xd4/0x378
[ 35.710470] driver_probe_device+0x5c/0x110
[ 35.714647] __device_attach_driver+0x9c/0xc0
[ 35.718996] bus_for_each_drv+0x68/0xd0
[ 35.722824] __device_attach+0xe0/0x148
[ 35.726653] device_initial_probe+0x14/0x20
[ 35.730829] bus_probe_device+0x9c/0xa8
[ 35.734657] deferred_probe_work_func+0x74/0xb0
[ 35.739183] process_one_work+0x1ec/0x368
[ 35.743184] worker_thread+0x20c/0x490
[ 35.746926] kthread+0x150/0x158
[ 35.750149] ret_from_fork+0x10/0x18
[ 35.753717] ---[ end trace 03534809175888d3 ]---
[ 35.761335] ------------[ cut here ]------------
[ 35.765973] sata_rcar ee300000.sata: deferred probe timeout, ignoring dependency
[ 35.766016] WARNING: CPU: 3 PID: 194 at ../drivers/base/dd.c:270 driver_deferred_probe_check_state+0x48/0x68
[ 35.783219] Modules linked in:
[ 35.786269] CPU: 3 PID: 194 Comm: kworker/3:2 Tainted: G W 5.6.0-next-20200401 #1203
[ 35.795305] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[ 35.803216] Workqueue: events deferred_probe_work_func
[ 35.808348] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 35.813133] pc : driver_deferred_probe_check_state+0x48/0x68
[ 35.818785] lr : driver_deferred_probe_check_state+0x48/0x68
[ 35.824436] sp : ffff8000121cba70
[ 35.827742] x29: ffff8000121cba70 x28: 0000000000000000
[ 35.833048] x27: ffff000734cc51b8 x26: ffff800011ca6cd0
[ 35.838352] x25: ffff8000113c4150 x24: ffff8000113c4160
[ 35.843656] x23: ffff00073f01f938 x22: ffff0007355d1010
[ 35.848961] x21: 0000000000000000 x20: ffff8000121cbb28
[ 35.854265] x19: ffff0007355d1010 x18: ffffffffffffffff
[ 35.859570] x17: 00000000000000c0 x16: fffffe001cb2e808
[ 35.864874] x15: 000000167d716670 x14: 646e657065642067
[ 35.870178] x13: 6e69726f6e676920 x12: 2c74756f656d6974
[ 35.875483] x11: 2065626f72702064 x10: ffff800011caac10
[ 35.880787] x9 : 3a617461732e3030 x8 : 3030303365652072
[ 35.886091] x7 : 6163725f61746173 x6 : ffff800011caa84c
[ 35.891396] x5 : 0000000000000000 x4 : 0000000000000000
[ 35.896700] x3 : 00000000ffffffff x2 : ffff80072d8d4000
[ 35.902004] x1 : c105309b57ee0b00 x0 : 0000000000000000
[ 35.907309] Call trace:
[ 35.909750] driver_deferred_probe_check_state+0x48/0x68
[ 35.915056] of_iommu_xlate+0xd8/0xe8
[ 35.918711] of_iommu_configure+0xdc/0x228
[ 35.922802] of_dma_configure+0xd8/0x218
[ 35.926719] platform_dma_configure+0x1c/0xa8
[ 35.931068] really_probe+0xd4/0x378
[ 35.934636] driver_probe_device+0x5c/0x110
[ 35.938812] __device_attach_driver+0x9c/0xc0
[ 35.943161] bus_for_each_drv+0x68/0xd0
[ 35.946990] __device_attach+0xe0/0x148
[ 35.950818] device_initial_probe+0x14/0x20
[ 35.954993] bus_probe_device+0x9c/0xa8
[ 35.958822] deferred_probe_work_func+0x74/0xb0
[ 35.963346] process_one_work+0x1ec/0x368
[ 35.967347] worker_thread+0x20c/0x490
[ 35.971089] kthread+0x150/0x158
[ 35.974311] ret_from_fork+0x10/0x18
[ 35.977880] ---[ end trace 03534809175888d4 ]---
[ 35.983218] scsi host1: sata_rcar
[ 35.986664] ata1: SATA max UDMA/133 irq 172
[ 35.991972] ------------[ cut here ]------------
[ 35.996623] ravb e6800000.ethernet: deferred probe timeout, ignoring dependency
[ 35.996662] WARNING: CPU: 3 PID: 194 at ../drivers/base/dd.c:270 driver_deferred_probe_check_state+0x48/0x68
[ 36.013777] Modules linked in:
[ 36.016827] CPU: 3 PID: 194 Comm: kworker/3:2 Tainted: G W 5.6.0-next-20200401 #1203
[ 36.025863] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[ 36.033774] Workqueue: events deferred_probe_work_func
[ 36.038905] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 36.043690] pc : driver_deferred_probe_check_state+0x48/0x68
[ 36.049341] lr : driver_deferred_probe_check_state+0x48/0x68
[ 36.054992] sp : ffff8000121cba70
[ 36.058299] x29: ffff8000121cba70 x28: 0000000000000000
[ 36.063604] x27: ffff000734cc51b8 x26: ffff800011ca6cd0
[ 36.068908] x25: ffff8000113c4150 x24: ffff8000113c4160
[ 36.074213] x23: ffff00073effc8c8 x22: ffff000735579410
[ 36.079517] x21: 0000000000000000 x20: ffff8000121cbb28
[ 36.084822] x19: ffff000735579410 x18: ffffffffffffffff
[ 36.090126] x17: 0000000000000020 x16: ffff800010ef5118
[ 36.095430] x15: 00009fb67591bca2 x14: 65646e6570656420
[ 36.100735] x13: 676e69726f6e6769 x12: 202c74756f656d69
[ 36.106039] x11: 742065626f727020 x10: ffff800011caac10
[ 36.111343] x9 : 203a74656e726568 x8 : 74652e3030303030
[ 36.116647] x7 : 3836652062766172 x6 : ffff800011caa84b
[ 36.121952] x5 : 0000000000000000 x4 : 0000000000000000
[ 36.127256] x3 : 00000000ffffffff x2 : ffff80072d8d4000
[ 36.132560] x1 : c105309b57ee0b00 x0 : 0000000000000000
[ 36.137865] Call trace:
[ 36.140305] driver_deferred_probe_check_state+0x48/0x68
[ 36.145611] of_iommu_xlate+0xd8/0xe8
[ 36.149266] of_iommu_configure+0xdc/0x228
[ 36.153357] of_dma_configure+0xd8/0x218
[ 36.157274] platform_dma_configure+0x1c/0xa8
[ 36.161624] really_probe+0xd4/0x378
[ 36.165192] driver_probe_device+0x5c/0x110
[ 36.169368] __device_attach_driver+0x9c/0xc0
[ 36.173717] bus_for_each_drv+0x68/0xd0
[ 36.177545] __device_attach+0xe0/0x148
[ 36.181374] device_initial_probe+0x14/0x20
[ 36.185550] bus_probe_device+0x9c/0xa8
[ 36.189378] deferred_probe_work_func+0x74/0xb0
[ 36.193903] process_one_work+0x1ec/0x368
[ 36.197904] worker_thread+0x20c/0x490
[ 36.201646] kthread+0x150/0x158
[ 36.204868] ret_from_fork+0x10/0x18
[ 36.208436] ---[ end trace 03534809175888d5 ]---
[ 36.213636] libphy: ravb_mii: probed
[ 36.218666] ravb e6800000.ethernet eth0: Base address at 0xe6800000, 2e:09:0a:02:eb:2d, IRQ 117.
[ 36.228658] mmc1: new HS400 MMC card at address 0001
[ 36.233965] mmcblk1: mmc1:0001 BGSD4R 29.1 GiB
[ 36.238593] mmcblk1boot0: mmc1:0001 BGSD4R partition 1 31.9 MiB
[ 36.244626] mmcblk1boot1: mmc1:0001 BGSD4R partition 2 31.9 MiB
[ 36.250737] mmcblk1rpmb: mmc1:0001 BGSD4R partition 3 4.00 MiB, chardev (234:0)
[ 36.260159] mmcblk1: p1
[ 36.404638] ata1: link resume succeeded after 1 retries
[ 36.506130] mmc2: new ultra high speed SDR104 SDHC card at address aaaa
[ 36.513271] mmcblk2: mmc2:aaaa AGGCD 29.7 GiB
[ 36.516163] ata1: SATA link down (SStatus 0 SControl 300)
[ 113.637217] VFS: Unable to mount root fs via NFS, trying floppy.
[ 113.643691] VFS: Cannot open root device "nfs" or unknown-block(2,0): error -6
[ 113.650939] Please append a correct "root=" boot option; here are the available partitions:
[ 113.659303] 0800 60653568 sda
[ 113.659305] driver: sd
[ 113.665408] 0801 10485760 sda1 8e680d09-01
[ 113.665409]
[ 113.671769] b300 31166976 mmcblk0
[ 113.671771] driver: mmcblk
[ 113.678566] b301 10485760 mmcblk0p1 e38b1b5e-01
[ 113.678568]
[ 113.685364] b320 30535680 mmcblk1
[ 113.685366] driver: mmcblk
[ 113.692158] b321 30534639 mmcblk1p1 250e284c-e8fb-4cfc-b978-084f29d69466
[ 113.692159]
[ 113.701127] b380 31166976 mmcblk2
[ 113.701128] driver: mmcblk
[ 113.707920] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
[ 113.716178] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.6.0-next-20200401 #1203
[ 113.724868] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[ 113.732777] Call trace:
[ 113.735227] dump_backtrace+0x0/0x1b0
[ 113.738883] show_stack+0x18/0x28
[ 113.742195] dump_stack+0xc0/0x10c
[ 113.745591] panic+0x170/0x37c
[ 113.748644] mount_block_root+0x1a4/0x254
[ 113.752647] mount_root+0x130/0x168
[ 113.756128] prepare_namespace+0x13c/0x180
[ 113.760218] kernel_init_freeable+0x244/0x268
[ 113.764569] kernel_init+0x14/0x110
[ 113.768051] ret_from_fork+0x10/0x18
[ 113.771628] SMP: stopping secondary CPUs
[ 113.775637] Kernel Offset: disabled
[ 113.779119] CPU features: 0x090002,21006004
[ 113.783294] Memory Limit: none
[ 113.786347] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0) ]---
Powered by blists - more mailing lists