| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHLCerOY9gBM-E2oJXi0TnUODj5bzpDpgvD3ixW_oLNN8hnpDg@mail.gmail.com>
Date: Thu, 9 Apr 2020 19:23:43 +0530
From: Amit Kucheria <amit.kucheria@...durent.com>
To: Anson Huang <Anson.Huang@....com>
Cc: Zhang Rui <rui.zhang@...el.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>, kernel@...gutronix.de,
Fabio Estevam <festevam@...il.com>,
Linux PM list <linux-pm@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
lakml <linux-arm-kernel@...ts.infradead.org>,
LKML <linux-kernel@...r.kernel.org>,
dl-linux-imx <Linux-imx@....com>
Subject: Re: [PATCH] dt-bindings: thermal: Convert i.MX to json-schema
On Thu, Apr 9, 2020 at 10:29 AM Anson Huang <Anson.Huang@....com> wrote:
>
> Convert the i.MX thermal binding to DT schema format using json-schema
>
> Signed-off-by: Anson Huang <Anson.Huang@....com>
> ---
> .../devicetree/bindings/thermal/imx-thermal.txt | 61 --------------
> .../devicetree/bindings/thermal/imx-thermal.yaml | 97 ++++++++++++++++++++++
> 2 files changed, 97 insertions(+), 61 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/thermal/imx-thermal.txt
> create mode 100644 Documentation/devicetree/bindings/thermal/imx-thermal.yaml
>
> diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
> deleted file mode 100644
> index 823e417..0000000
> --- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt
> +++ /dev/null
> @@ -1,61 +0,0 @@
> -* Temperature Monitor (TEMPMON) on Freescale i.MX SoCs
> -
> -Required properties:
> -- compatible : must be one of following:
> - - "fsl,imx6q-tempmon" for i.MX6Q,
> - - "fsl,imx6sx-tempmon" for i.MX6SX,
> - - "fsl,imx7d-tempmon" for i.MX7S/D.
> -- interrupts : the interrupt output of the controller:
> - i.MX6Q has one IRQ which will be triggered when temperature is higher than high threshold,
> - i.MX6SX and i.MX7S/D have two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC,
> - when temperature is below than low threshold, IRQ_LOW will be triggered, when temperature
> - is higher than panic threshold, system will auto reboot by SRC module.
> -- fsl,tempmon : phandle pointer to system controller that contains TEMPMON
> - control registers, e.g. ANATOP on imx6q.
> -- nvmem-cells: A phandle to the calibration cells provided by ocotp.
> -- nvmem-cell-names: Should be "calib", "temp_grade".
> -
> -Deprecated properties:
> -- fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON
> - calibration data, e.g. OCOTP on imx6q. The details about calibration data
> - can be found in SoC Reference Manual.
> -
> -Direct access to OCOTP via fsl,tempmon-data is incorrect on some newer chips
> -because it does not handle OCOTP clock requirements.
> -
> -Optional properties:
> -- clocks : thermal sensor's clock source.
> -
> -Example:
> -ocotp: ocotp@...c000 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "fsl,imx6sx-ocotp", "syscon";
> - reg = <0x021bc000 0x4000>;
> - clocks = <&clks IMX6SX_CLK_OCOTP>;
> -
> - tempmon_calib: calib@38 {
> - reg = <0x38 4>;
> - };
> -
> - tempmon_temp_grade: temp-grade@20 {
> - reg = <0x20 4>;
> - };
> -};
> -
> -tempmon: tempmon {
> - compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
> - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> - fsl,tempmon = <&anatop>;
> - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
> - nvmem-cell-names = "calib", "temp_grade";
> - clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
> -};
> -
> -Legacy method (Deprecated):
> -tempmon {
> - compatible = "fsl,imx6q-tempmon";
> - fsl,tempmon = <&anatop>;
> - fsl,tempmon-data = <&ocotp>;
> - clocks = <&clks 172>;
> -};
> diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
> new file mode 100644
> index 0000000..ad12622
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
> @@ -0,0 +1,97 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/imx-thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX Thermal Binding
> +
> +maintainers:
> + - Anson Huang <Anson.Huang@....com>
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - enum:
> + - fsl,imx6q-tempmon
> + - fsl,imx6sx-tempmon
> + - fsl,imx7d-tempmon
> +
> + interrupts:
> + description: |
> + The interrupt output of the controller, the IRQ will be triggered
> + when temperature is higher than high threshold.
> + maxItems: 1
> +
> + nvmem-cells:
> + description: |
> + Phandle to the calibration cells provided by ocotp for calibration
> + data and temperature grade.
> + maxItems: 2
> +
> + nvmem-cell-names:
> + maxItems: 2
> + items:
> + - const: calib
> + - const: temp_grade
> +
> + fsl,tempmon:
> + description: |
> + Phandle pointer to system controller that contains TEMPMON control
> + registers, e.g. ANATOP on imx6q.
> + $ref: '/schemas/types.yaml#/definitions/phandle'
> +
> + fsl,tempmon-data:
> + description: |
> + Deprecated property, phandle pointer to fuse controller that contains
> + TEMPMON calibration data, e.g. OCOTP on imx6q. The details about
> + calibration data can be found in SoC Reference Manual.
> + $ref: '/schemas/types.yaml#/definitions/phandle'
> +
> + clocks:
> + description: |
> + Thermal sensor's clock source.
> + maxItems: 1
> +
> +required:
> + - compatible
> + - interrupts
> + - fsl,tempmon
> + - clocks
> + - nvmem-cells
> + - nvmem-cell-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/imx6sx-clock.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + ocotp: ocotp@...c000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "fsl,imx6sx-ocotp", "syscon";
> + reg = <0x021bc000 0x4000>;
> + clocks = <&clks IMX6SX_CLK_OCOTP>;
> +
> + tempmon_calib: calib@38 {
> + reg = <0x38 4>;
> + };
> +
> + tempmon_temp_grade: temp-grade@20 {
> + reg = <0x20 4>;
> + };
> + };
> +
> + tempmon: tempmon {
> + compatible = "fsl,imx6sx-tempmon";
> + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> + fsl,tempmon = <&anatop>;
> + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
> + nvmem-cell-names = "calib", "temp_grade";
> + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
Also, #thermal-sensor-cells property is missing in the example and in
the property list above.
> + };
> +
> +...
> --
> 2.7.4
>
Powered by blists - more mailing lists