[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200409204030.21330-1-rentao.bupt@gmail.com>
Date: Thu, 9 Apr 2020 13:40:30 -0700
From: rentao.bupt@...il.com
To: Felipe Balbi <balbi@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
Stephen Boyd <swboyd@...omium.org>, linux-usb@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
openbmc@...ts.ozlabs.org, taoren@...com
Cc: Tao Ren <rentao.bupt@...il.com>
Subject: [PATCH v4] usb: gadget: aspeed: improve vhub port irq handling
From: Tao Ren <rentao.bupt@...il.com>
This patch evaluates vhub ports' irq mask before going through per-port
irq handling one by one, which helps to speed up irq handling in case
there is no port interrupt.
Signed-off-by: Tao Ren <rentao.bupt@...il.com>
---
Changes in v4:
- use simple for() loop as it runs faster than for_each_set_bit()
loop on aspeed BMCs.
Changes in v3:
- assign istat to (unsigned long) bitmap before calling
"for_each_set_bit_from".
Changes in v2:
- use "for_each_set_bit" to speed up port irq handling.
drivers/usb/gadget/udc/aspeed-vhub/core.c | 12 +++++++-----
drivers/usb/gadget/udc/aspeed-vhub/vhub.h | 11 ++++++-----
2 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c
index f8d35dd60c34..fb36bad2c0b7 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/core.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c
@@ -134,11 +134,11 @@ static irqreturn_t ast_vhub_irq(int irq, void *data)
}
/* Handle device interrupts */
- for (i = 0; i < vhub->max_ports; i++) {
- u32 dev_mask = VHUB_IRQ_DEVICE1 << i;
-
- if (istat & dev_mask)
- ast_vhub_dev_irq(&vhub->ports[i].dev);
+ if (istat & vhub->port_irq_mask) {
+ for (i = 0; i < vhub->max_ports; i++) {
+ if (istat & VHUB_DEV_IRQ(i))
+ ast_vhub_dev_irq(&vhub->ports[i].dev);
+ }
}
/* Handle top-level vHub EP0 interrupts */
@@ -332,6 +332,8 @@ static int ast_vhub_probe(struct platform_device *pdev)
spin_lock_init(&vhub->lock);
vhub->pdev = pdev;
+ vhub->port_irq_mask = GENMASK(VHUB_IRQ_DEV1_BIT + vhub->max_ports - 1,
+ VHUB_IRQ_DEV1_BIT);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
vhub->regs = devm_ioremap_resource(&pdev->dev, res);
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
index fac79ef6d669..b80e3ddff797 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
+++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
@@ -51,14 +51,11 @@
#define VHUB_CTRL_UPSTREAM_CONNECT (1 << 0)
/* IER & ISR */
+#define VHUB_IRQ_DEV1_BIT 9
#define VHUB_IRQ_USB_CMD_DEADLOCK (1 << 18)
#define VHUB_IRQ_EP_POOL_NAK (1 << 17)
#define VHUB_IRQ_EP_POOL_ACK_STALL (1 << 16)
-#define VHUB_IRQ_DEVICE5 (1 << 13)
-#define VHUB_IRQ_DEVICE4 (1 << 12)
-#define VHUB_IRQ_DEVICE3 (1 << 11)
-#define VHUB_IRQ_DEVICE2 (1 << 10)
-#define VHUB_IRQ_DEVICE1 (1 << 9)
+#define VHUB_IRQ_DEVICE1 (1 << (VHUB_IRQ_DEV1_BIT))
#define VHUB_IRQ_BUS_RESUME (1 << 8)
#define VHUB_IRQ_BUS_SUSPEND (1 << 7)
#define VHUB_IRQ_BUS_RESET (1 << 6)
@@ -70,6 +67,9 @@
#define VHUB_IRQ_HUB_EP0_SETUP (1 << 0)
#define VHUB_IRQ_ACK_ALL 0x1ff
+/* Downstream device IRQ mask. */
+#define VHUB_DEV_IRQ(n) (VHUB_IRQ_DEVICE1 << (n))
+
/* SW reset reg */
#define VHUB_SW_RESET_EP_POOL (1 << 9)
#define VHUB_SW_RESET_DMA_CONTROLLER (1 << 8)
@@ -402,6 +402,7 @@ struct ast_vhub {
/* Per-port info */
struct ast_vhub_port *ports;
u32 max_ports;
+ u32 port_irq_mask;
/* Generic EP data structures */
struct ast_vhub_ep *epns;
--
2.17.1
Powered by blists - more mailing lists