[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <8c7a48e1b06771edf0aa46f5b4cee300aa1eeb06.camel@kernel.crashing.org>
Date: Fri, 10 Apr 2020 08:55:15 +1000
From: Benjamin Herrenschmidt <benh@...nel.crashing.org>
To: rentao.bupt@...il.com, Felipe Balbi <balbi@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
Stephen Boyd <swboyd@...omium.org>, linux-usb@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
openbmc@...ts.ozlabs.org, taoren@...com
Subject: Re: [PATCH v4] usb: gadget: aspeed: improve vhub port irq handling
On Thu, 2020-04-09 at 13:40 -0700, rentao.bupt@...il.com wrote:
> From: Tao Ren <rentao.bupt@...il.com>
>
> This patch evaluates vhub ports' irq mask before going through per-
> port
> irq handling one by one, which helps to speed up irq handling in case
> there is no port interrupt.
>
> Signed-off-by: Tao Ren <rentao.bupt@...il.com>
Acked-by: Benjamin Herrenschmidt <benh@...nel.crashing.org>
> ---
> Changes in v4:
> - use simple for() loop as it runs faster than for_each_set_bit()
> loop on aspeed BMCs.
> Changes in v3:
> - assign istat to (unsigned long) bitmap before calling
> "for_each_set_bit_from".
> Changes in v2:
> - use "for_each_set_bit" to speed up port irq handling.
>
> drivers/usb/gadget/udc/aspeed-vhub/core.c | 12 +++++++-----
> drivers/usb/gadget/udc/aspeed-vhub/vhub.h | 11 ++++++-----
> 2 files changed, 13 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c
> b/drivers/usb/gadget/udc/aspeed-vhub/core.c
> index f8d35dd60c34..fb36bad2c0b7 100644
> --- a/drivers/usb/gadget/udc/aspeed-vhub/core.c
> +++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c
> @@ -134,11 +134,11 @@ static irqreturn_t ast_vhub_irq(int irq, void
> *data)
> }
>
> /* Handle device interrupts */
> - for (i = 0; i < vhub->max_ports; i++) {
> - u32 dev_mask = VHUB_IRQ_DEVICE1 << i;
> -
> - if (istat & dev_mask)
> - ast_vhub_dev_irq(&vhub->ports[i].dev);
> + if (istat & vhub->port_irq_mask) {
> + for (i = 0; i < vhub->max_ports; i++) {
> + if (istat & VHUB_DEV_IRQ(i))
> + ast_vhub_dev_irq(&vhub->ports[i].dev);
> + }
> }
>
> /* Handle top-level vHub EP0 interrupts */
> @@ -332,6 +332,8 @@ static int ast_vhub_probe(struct platform_device
> *pdev)
>
> spin_lock_init(&vhub->lock);
> vhub->pdev = pdev;
> + vhub->port_irq_mask = GENMASK(VHUB_IRQ_DEV1_BIT + vhub-
> >max_ports - 1,
> + VHUB_IRQ_DEV1_BIT);
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> vhub->regs = devm_ioremap_resource(&pdev->dev, res);
> diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
> b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
> index fac79ef6d669..b80e3ddff797 100644
> --- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
> +++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
> @@ -51,14 +51,11 @@
> #define VHUB_CTRL_UPSTREAM_CONNECT (1 << 0)
>
> /* IER & ISR */
> +#define VHUB_IRQ_DEV1_BIT 9
> #define VHUB_IRQ_USB_CMD_DEADLOCK (1 << 18)
> #define VHUB_IRQ_EP_POOL_NAK (1 << 17)
> #define VHUB_IRQ_EP_POOL_ACK_STALL (1 << 16)
> -#define VHUB_IRQ_DEVICE5 (1 << 13)
> -#define VHUB_IRQ_DEVICE4 (1 << 12)
> -#define VHUB_IRQ_DEVICE3 (1 << 11)
> -#define VHUB_IRQ_DEVICE2 (1 << 10)
> -#define VHUB_IRQ_DEVICE1 (1 << 9)
> +#define VHUB_IRQ_DEVICE1 (1 <<
> (VHUB_IRQ_DEV1_BIT))
> #define VHUB_IRQ_BUS_RESUME (1 << 8)
> #define VHUB_IRQ_BUS_SUSPEND (1 << 7)
> #define VHUB_IRQ_BUS_RESET (1 << 6)
> @@ -70,6 +67,9 @@
> #define VHUB_IRQ_HUB_EP0_SETUP (1 << 0)
> #define VHUB_IRQ_ACK_ALL 0x1ff
>
> +/* Downstream device IRQ mask. */
> +#define VHUB_DEV_IRQ(n) (VHUB_IRQ_DEVIC
> E1 << (n))
> +
> /* SW reset reg */
> #define VHUB_SW_RESET_EP_POOL (1 << 9)
> #define VHUB_SW_RESET_DMA_CONTROLLER (1 << 8)
> @@ -402,6 +402,7 @@ struct ast_vhub {
> /* Per-port info */
> struct ast_vhub_port *ports;
> u32 max_ports;
> + u32 port_irq_mask;
>
> /* Generic EP data structures */
> struct ast_vhub_ep *epns;
Powered by blists - more mailing lists