linux-kernel - [PATCH 0/2] Add software flow control support for STM32 UART

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200412180923.30774-1-mani@kernel.org>
Date:   Sun, 12 Apr 2020 23:39:21 +0530
From:   mani@...nel.org
To:     gregkh@...uxfoundation.org, robh+dt@...nel.org,
        mcoquelin.stm32@...il.com, alexandre.torgue@...com
Cc:     linux-serial@...r.kernel.org, devicetree@...r.kernel.org,
        linux-stm32@...md-mailman.stormreply.com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Manivannan Sadhasivam <mani@...nel.org>
Subject: [PATCH 0/2] Add software flow control support for STM32 UART

From: Manivannan Sadhasivam <mani@...nel.org>

Hello,

This patchset adds software flow control support for STM32 UART controller.
This is necessary for the upcoming STM32MP1 based board called Stinger96
IoT-Box. On that board, a bluetooth chip is connected to one of the UART
controller but the CTS/RTS lines got swapped mistakenly. So in order to
workaround that hardware bug and also to support the usecase of using only
Tx/Rx pins, this patchset adds software flow control support.

This patchset has been validated w/ Stinger96 IoT-Box connected to Murata
WiFi-BT combo chip.

Thanks,
Mani

Manivannan Sadhasivam (2):
  dt-bindings: serial: Add binding for software flow control in STM32
    UART
  tty: serial: Add software flow control support for STM32 USART

 .../bindings/serial/st,stm32-uart.yaml        |  15 +-
 drivers/tty/serial/stm32-usart.c              | 143 +++++++++++++++++-
 drivers/tty/serial/stm32-usart.h              |   4 +
 3 files changed, 155 insertions(+), 7 deletions(-)

-- 
2.17.1