Date:   Fri, 17 Apr 2020 07:52:50 +0000
From:   Loic PALLARDY <loic.pallardy@...com>
To:     Rishabh Bhatnagar <rishabhb@...eaurora.org>,
        "linux-remoteproc@...r.kernel.org" <linux-remoteproc@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC:     "bjorn.andersson@...aro.org" <bjorn.andersson@...aro.org>,
        "ohad@...ery.com" <ohad@...ery.com>,
        "mathieu.poirier@...aro.org" <mathieu.poirier@...aro.org>,
        "tsoni@...eaurora.org" <tsoni@...eaurora.org>,
        "psodagud@...eaurora.org" <psodagud@...eaurora.org>,
        "sidgup@...eaurora.org" <sidgup@...eaurora.org>
Subject: RE: [PATCH 2/3] remoteproc: Add inline coredump functionality

Hi Rishabh,

> -----Original Message-----
> From: linux-remoteproc-owner@...r.kernel.org <linux-remoteproc-
> owner@...r.kernel.org> On Behalf Of Rishabh Bhatnagar
> Sent: jeudi 16 avril 2020 20:39
> To: linux-remoteproc@...r.kernel.org; linux-kernel@...r.kernel.org
> Cc: bjorn.andersson@...aro.org; ohad@...ery.com;
> mathieu.poirier@...aro.org; tsoni@...eaurora.org;
> psodagud@...eaurora.org; sidgup@...eaurora.org; Rishabh Bhatnagar
> <rishabhb@...eaurora.org>
> Subject: [PATCH 2/3] remoteproc: Add inline coredump functionality
> 
> This patch adds the inline coredump functionality. The current
> coredump implementation uses vmalloc area to copy all the segments.
> But this might put a lot of strain on low memory targets as the
> firmware size sometimes is in ten's of MBs. The situation becomes
> worse if there are multiple remote processors  undergoing recovery
> at the same time. This patch directly copies the device memory to
> userspace buffer and avoids extra memory usage. This requires
> recovery to be halted until data is read by userspace and free
> function is called.
> 
> Signed-off-by: Rishabh Bhatnagar <rishabhb@...eaurora.org>
> ---
>  drivers/remoteproc/remoteproc_coredump.c | 130
> +++++++++++++++++++++++++++++++
>  drivers/remoteproc/remoteproc_internal.h |  23 +++++-
>  include/linux/remoteproc.h               |   2 +
>  3 files changed, 153 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/remoteproc/remoteproc_coredump.c
> b/drivers/remoteproc/remoteproc_coredump.c
> index 9de0467..888b7dec91 100644
> --- a/drivers/remoteproc/remoteproc_coredump.c
> +++ b/drivers/remoteproc/remoteproc_coredump.c
> @@ -12,6 +12,84 @@
>  #include <linux/remoteproc.h>
>  #include "remoteproc_internal.h"
> 
> +static void rproc_free_dump(void *data)
> +{
> +	struct rproc_coredump_state *dump_state = data;
> +
> +	complete(&dump_state->dump_done);
> +}
> +
> +static unsigned long resolve_addr(loff_t user_offset,
> +				   struct list_head *segments,
> +				   unsigned long *data_left)
> +{
> +	struct rproc_dump_segment *segment;
> +
> +	list_for_each_entry(segment, segments, node) {
> +		if (user_offset >= segment->size)
> +			user_offset -= segment->size;
> +		else
> +			break;
> +	}
> +
> +	if (&segment->node == segments) {
> +		*data_left = 0;
> +		return 0;
> +	}
> +
> +	*data_left = segment->size - user_offset;
> +
> +	return segment->da + user_offset;
> +}
> +
> +static ssize_t rproc_read_dump(char *buffer, loff_t offset, size_t count,
> +				void *data, size_t header_size)
> +{
> +	void *device_mem;
> +	size_t data_left, copy_size, bytes_left = count;
> +	unsigned long addr;
> +	struct rproc_coredump_state *dump_state = data;
> +	struct rproc *rproc = dump_state->rproc;
> +	void *elfcore = dump_state->header;
> +
> +	/* Copy the header first */
> +	if (offset < header_size) {
> +		copy_size = header_size - offset;
> +		copy_size = min(copy_size, bytes_left);
> +
> +		memcpy(buffer, elfcore + offset, copy_size);
> +		offset += copy_size;
> +		bytes_left -= copy_size;
> +		buffer += copy_size;
> +	}
> +
> +	while (bytes_left) {
> +		addr = resolve_addr(offset - header_size,
> +				    &rproc->dump_segments, &data_left);
> +		/* EOF check */
> +		if (data_left == 0) {
> +			pr_info("Ramdump complete %lld bytes read",
> offset);
> +			break;
> +		}
> +
> +		copy_size = min_t(size_t, bytes_left, data_left);
> +
> +		device_mem = rproc->ops->da_to_va(rproc, addr,
> copy_size);
> +		if (!device_mem) {
> +			pr_err("Address:%lx with size %zd out of remoteproc
> carveout\n",
> +				addr, copy_size);
> +			return -ENOMEM;
> +		}
> +		memcpy(buffer, device_mem, copy_size);
> +
> +		offset += copy_size;
> +		buffer += copy_size;
> +		bytes_left -= copy_size;
> +	}
> +
> +	return count - bytes_left;
> +}
> +
>  static void create_elf_header(void *data, int phnum, struct rproc *rproc)
>  {
>  	struct elf32_phdr *phdr;
> @@ -55,6 +133,58 @@ static void create_elf_header(void *data, int phnum,
> struct rproc *rproc)
>  }
> 
>  /**
> + * rproc_inline_coredump() - perform synchronized coredump
> + * @rproc:	rproc handle
> + *
> + * This function will generate an ELF header for the registered segments
> + * and create a devcoredump device associated with rproc. This function
> + * directly copies the segments from device memory to userspace. The
> + * recovery is stalled until the enitire coredump is read. This approach
Typo entire -> entire
> + * avoids using extra vmalloc memory(which can be really large).
> + */
> +void rproc_inline_coredump(struct rproc *rproc)
> +{
> +	struct rproc_dump_segment *segment;
> +	struct elf32_phdr *phdr;
> +	struct elf32_hdr *ehdr;
> +	struct rproc_coredump_state *dump_state;
> +	size_t header_size;
> +	void *data;
> +	int phnum = 0;
> +
> +	if (list_empty(&rproc->dump_segments))
> +		return;
> +
> +	header_size = sizeof(*ehdr);
> +	list_for_each_entry(segment, &rproc->dump_segments, node) {
> +		header_size += sizeof(*phdr);
> +
> +		phnum++;
> +	}
> +
> +	data = vmalloc(header_size);
> +	if (!data)
> +		return;
> +
> +	ehdr = data;
> +	create_elf_header(data, phnum, rproc);
> +
> +	dump_state = kzalloc(sizeof(*dump_state), GFP_KERNEL);
> +	dump_state->rproc = rproc;
> +	dump_state->header = data;
> +	init_completion(&dump_state->dump_done);
> +
> +	dev_coredumpm(&rproc->dev, NULL, dump_state, header_size,
> GFP_KERNEL,
> +		      rproc_read_dump, rproc_free_dump);
> +
> +	/* Wait until the dump is read and free is called */
> +	wait_for_completion(&dump_state->dump_done);

Maybe good to add a timeout with value programmable via debugfs?

Regards,
Loic
> +
> +	kfree(dump_state);
> +}
> +EXPORT_SYMBOL(rproc_inline_coredump);
> +
> +/**
>   * rproc_default_coredump() - perform coredump
>   * @rproc:	rproc handle
>   *
> diff --git a/drivers/remoteproc/remoteproc_internal.h
> b/drivers/remoteproc/remoteproc_internal.h
> index 28b6af2..ea6146e 100644
> --- a/drivers/remoteproc/remoteproc_internal.h
> +++ b/drivers/remoteproc/remoteproc_internal.h
> @@ -24,6 +24,18 @@ struct rproc_debug_trace {
>  	struct rproc_mem_entry trace_mem;
>  };
> 
> +struct rproc_coredump_state {
> +	struct rproc *rproc;
> +	void *header;
> +	struct completion dump_done;
> +};
> +
> +enum rproc_coredump_conf {
> +	COREDUMP_DEFAULT,
> +	COREDUMP_INLINE,
> +	COREDUMP_DISABLED,
> +};
> +
>  /* from remoteproc_core.c */
>  void rproc_release(struct kref *kref);
>  irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
> @@ -49,6 +61,7 @@ struct dentry *rproc_create_trace_file(const char
> *name, struct rproc *rproc,
> 
>  /* from remoteproc_coredump.c */
>  void rproc_default_coredump(struct rproc *rproc);
> +void rproc_inline_coredump(struct rproc *rproc);
> 
>  void rproc_free_vring(struct rproc_vring *rvring);
>  int rproc_alloc_vring(struct rproc_vdev *rvdev, int i);
> @@ -125,8 +138,14 @@ struct resource_table
> *rproc_find_loaded_rsc_table(struct rproc *rproc,
>  static inline
>  void rproc_coredump(struct rproc *rproc)
>  {
> -	return rproc_default_coredump(rproc);
> -
> +	switch (rproc->coredump_conf) {
> +	case COREDUMP_DEFAULT:
> +		return rproc_default_coredump(rproc);
> +	case COREDUMP_INLINE:
> +		return rproc_inline_coredump(rproc);
> +	default:
> +		break;
> +	}
>  }
> 
>  #endif /* REMOTEPROC_INTERNAL_H */
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index 16ad666..23298ce 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -459,6 +459,7 @@ struct rproc_dump_segment {
>   * @dev: virtual device for refcounting and common remoteproc behavior
>   * @power: refcount of users who need this rproc powered up
>   * @state: state of the device
> + * @coredump_conf: Currenlty selected coredump configuration
>   * @lock: lock which protects concurrent manipulations of the rproc
>   * @dbg_dir: debugfs directory of this rproc device
>   * @traces: list of trace buffers
> @@ -492,6 +493,7 @@ struct rproc {
>  	struct device dev;
>  	atomic_t power;
>  	unsigned int state;
> +	unsigned int coredump_conf;
>  	struct mutex lock;
>  	struct dentry *dbg_dir;
>  	struct list_head traces;
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> Forum,
> a Linux Foundation Collaborative Project

Powered by blists - more mailing lists