[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200420153543.14512-1-jonathan@marek.ca>
Date: Mon, 20 Apr 2020 11:35:43 -0400
From: Jonathan Marek <jonathan@...ek.ca>
To: linux-arm-msm@...r.kernel.org
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH] arm64: dts: qcom: fix pm8150 gpio interrupts
This was mistakenly copied from the downstream dts, however the upstream
driver works differently.
I only tested this with the pm8150_gpios node (used with volume button),
but the 2 others should be the same.
Signed-off-by: Jonathan Marek <jonathan@...ek.ca>
---
arch/arm64/boot/dts/qcom/pm8150.dtsi | 14 ++------------
arch/arm64/boot/dts/qcom/pm8150b.dtsi | 14 ++------------
arch/arm64/boot/dts/qcom/pm8150l.dtsi | 14 ++------------
3 files changed, 6 insertions(+), 36 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index b6e304748a57..c0b197458665 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -73,18 +73,8 @@ pm8150_gpios: gpio@...0 {
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
- interrupts = <0x0 0xc0 0x0 IRQ_TYPE_NONE>,
- <0x0 0xc1 0x0 IRQ_TYPE_NONE>,
- <0x0 0xc2 0x0 IRQ_TYPE_NONE>,
- <0x0 0xc3 0x0 IRQ_TYPE_NONE>,
- <0x0 0xc4 0x0 IRQ_TYPE_NONE>,
- <0x0 0xc5 0x0 IRQ_TYPE_NONE>,
- <0x0 0xc6 0x0 IRQ_TYPE_NONE>,
- <0x0 0xc7 0x0 IRQ_TYPE_NONE>,
- <0x0 0xc8 0x0 IRQ_TYPE_NONE>,
- <0x0 0xc9 0x0 IRQ_TYPE_NONE>,
- <0x0 0xca 0x0 IRQ_TYPE_NONE>,
- <0x0 0xcb 0x0 IRQ_TYPE_NONE>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 322379d5c31f..40b5d75a4a1d 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -62,18 +62,8 @@ pm8150b_gpios: gpio@...0 {
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
- interrupts = <0x2 0xc0 0x0 IRQ_TYPE_NONE>,
- <0x2 0xc1 0x0 IRQ_TYPE_NONE>,
- <0x2 0xc2 0x0 IRQ_TYPE_NONE>,
- <0x2 0xc3 0x0 IRQ_TYPE_NONE>,
- <0x2 0xc4 0x0 IRQ_TYPE_NONE>,
- <0x2 0xc5 0x0 IRQ_TYPE_NONE>,
- <0x2 0xc6 0x0 IRQ_TYPE_NONE>,
- <0x2 0xc7 0x0 IRQ_TYPE_NONE>,
- <0x2 0xc8 0x0 IRQ_TYPE_NONE>,
- <0x2 0xc9 0x0 IRQ_TYPE_NONE>,
- <0x2 0xca 0x0 IRQ_TYPE_NONE>,
- <0x2 0xcb 0x0 IRQ_TYPE_NONE>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index eb0e9a090e42..cf05e0685d10 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -56,18 +56,8 @@ pm8150l_gpios: gpio@...0 {
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
- interrupts = <0x4 0xc0 0x0 IRQ_TYPE_NONE>,
- <0x4 0xc1 0x0 IRQ_TYPE_NONE>,
- <0x4 0xc2 0x0 IRQ_TYPE_NONE>,
- <0x4 0xc3 0x0 IRQ_TYPE_NONE>,
- <0x4 0xc4 0x0 IRQ_TYPE_NONE>,
- <0x4 0xc5 0x0 IRQ_TYPE_NONE>,
- <0x4 0xc6 0x0 IRQ_TYPE_NONE>,
- <0x4 0xc7 0x0 IRQ_TYPE_NONE>,
- <0x4 0xc8 0x0 IRQ_TYPE_NONE>,
- <0x4 0xc9 0x0 IRQ_TYPE_NONE>,
- <0x4 0xca 0x0 IRQ_TYPE_NONE>,
- <0x4 0xcb 0x0 IRQ_TYPE_NONE>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
};
--
2.26.1
Powered by blists - more mailing lists