[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20200420194359.GP576963@builder.lan>
Date: Mon, 20 Apr 2020 12:43:59 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Jonathan Marek <jonathan@...ek.ca>
Cc: linux-arm-msm@...r.kernel.org, Andy Gross <agross@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] arm64: dts: qcom: fix pm8150 gpio interrupts
On Mon 20 Apr 08:35 PDT 2020, Jonathan Marek wrote:
> This was mistakenly copied from the downstream dts, however the upstream
> driver works differently.
>
> I only tested this with the pm8150_gpios node (used with volume button),
> but the 2 others should be the same.
>
> Signed-off-by: Jonathan Marek <jonathan@...ek.ca>
Applied, thanks Jonathan
Regards,
Bjorn
> ---
> arch/arm64/boot/dts/qcom/pm8150.dtsi | 14 ++------------
> arch/arm64/boot/dts/qcom/pm8150b.dtsi | 14 ++------------
> arch/arm64/boot/dts/qcom/pm8150l.dtsi | 14 ++------------
> 3 files changed, 6 insertions(+), 36 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
> index b6e304748a57..c0b197458665 100644
> --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
> @@ -73,18 +73,8 @@ pm8150_gpios: gpio@...0 {
> reg = <0xc000>;
> gpio-controller;
> #gpio-cells = <2>;
> - interrupts = <0x0 0xc0 0x0 IRQ_TYPE_NONE>,
> - <0x0 0xc1 0x0 IRQ_TYPE_NONE>,
> - <0x0 0xc2 0x0 IRQ_TYPE_NONE>,
> - <0x0 0xc3 0x0 IRQ_TYPE_NONE>,
> - <0x0 0xc4 0x0 IRQ_TYPE_NONE>,
> - <0x0 0xc5 0x0 IRQ_TYPE_NONE>,
> - <0x0 0xc6 0x0 IRQ_TYPE_NONE>,
> - <0x0 0xc7 0x0 IRQ_TYPE_NONE>,
> - <0x0 0xc8 0x0 IRQ_TYPE_NONE>,
> - <0x0 0xc9 0x0 IRQ_TYPE_NONE>,
> - <0x0 0xca 0x0 IRQ_TYPE_NONE>,
> - <0x0 0xcb 0x0 IRQ_TYPE_NONE>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> index 322379d5c31f..40b5d75a4a1d 100644
> --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> @@ -62,18 +62,8 @@ pm8150b_gpios: gpio@...0 {
> reg = <0xc000>;
> gpio-controller;
> #gpio-cells = <2>;
> - interrupts = <0x2 0xc0 0x0 IRQ_TYPE_NONE>,
> - <0x2 0xc1 0x0 IRQ_TYPE_NONE>,
> - <0x2 0xc2 0x0 IRQ_TYPE_NONE>,
> - <0x2 0xc3 0x0 IRQ_TYPE_NONE>,
> - <0x2 0xc4 0x0 IRQ_TYPE_NONE>,
> - <0x2 0xc5 0x0 IRQ_TYPE_NONE>,
> - <0x2 0xc6 0x0 IRQ_TYPE_NONE>,
> - <0x2 0xc7 0x0 IRQ_TYPE_NONE>,
> - <0x2 0xc8 0x0 IRQ_TYPE_NONE>,
> - <0x2 0xc9 0x0 IRQ_TYPE_NONE>,
> - <0x2 0xca 0x0 IRQ_TYPE_NONE>,
> - <0x2 0xcb 0x0 IRQ_TYPE_NONE>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
> index eb0e9a090e42..cf05e0685d10 100644
> --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
> @@ -56,18 +56,8 @@ pm8150l_gpios: gpio@...0 {
> reg = <0xc000>;
> gpio-controller;
> #gpio-cells = <2>;
> - interrupts = <0x4 0xc0 0x0 IRQ_TYPE_NONE>,
> - <0x4 0xc1 0x0 IRQ_TYPE_NONE>,
> - <0x4 0xc2 0x0 IRQ_TYPE_NONE>,
> - <0x4 0xc3 0x0 IRQ_TYPE_NONE>,
> - <0x4 0xc4 0x0 IRQ_TYPE_NONE>,
> - <0x4 0xc5 0x0 IRQ_TYPE_NONE>,
> - <0x4 0xc6 0x0 IRQ_TYPE_NONE>,
> - <0x4 0xc7 0x0 IRQ_TYPE_NONE>,
> - <0x4 0xc8 0x0 IRQ_TYPE_NONE>,
> - <0x4 0xc9 0x0 IRQ_TYPE_NONE>,
> - <0x4 0xca 0x0 IRQ_TYPE_NONE>,
> - <0x4 0xcb 0x0 IRQ_TYPE_NONE>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> };
> };
>
> --
> 2.26.1
>
Powered by blists - more mailing lists