linux-kernel - Re: [PATCH v3 0/7] Add support for Allwinner H6 DVFS

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAJiuCcdDge21pRmN8LzKv_tMqBoD9KHg96MUxDS9gp0+xbroJg@mail.gmail.com>
Date:   Mon, 20 Apr 2020 14:36:32 +0200
From:   Clément Péron <peron.clem@...il.com>
To:     Ondřej Jirman <megous@...ous.com>,
        Maxime Ripard <maxime@...no.tech>,
        Clément Péron <peron.clem@...il.com>,
        Chen-Yu Tsai <wens@...e.org>, Rob Herring <robh+dt@...nel.org>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        devicetree <devicetree@...r.kernel.org>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        linux-sunxi <linux-sunxi@...glegroups.com>
Subject: Re: [PATCH v3 0/7] Add support for Allwinner H6 DVFS

Hi Ondrej, Maxime,

On Mon, 20 Apr 2020 at 12:39, Ondřej Jirman <megous@...ous.com> wrote:
>
> Hi Maxime,
>
> On Mon, Apr 20, 2020 at 10:45:47AM +0200, Maxime Ripard wrote:
> > Hi,
> >
> > On Sun, Apr 19, 2020 at 03:50:04PM +0200, Clément Péron wrote:
> > > Now that required drivers are merged we can contibute on DVFS
> > > support for Allwinner H6.
> > >
> > > This serie is based on Yangtao Li serie[0] and Ondřej Jirman work[1].
> > >
> > > Most of the OPP tables are taken from original vendor kernel[2].
> > > Plus there are new CPU frequencies at 1.6GHz, 1.7GHz and 1.8GHz.
> > >
> > > I wrote a simple script to randomly set a frequency during
> > > a random time[3]. This script is quite stressfull and set some high
> > > frequency without checking temperature. This can result on behavior
> > > that whould not occurs with the real cpufreq framework.
> > > As Maxime point out I also tested with cpufreq-ljt-stress-test
> > > (found here https://github.com/ssvb/cpuburn-arm).
> > > This script doesn't trigger any issue.
> > > I also test that that offlining CPU0 and doing DVFS on other CPUs
> > > works. As CPU regulator is only set for CPU0.
> > >
> > > The GPU devfreq was drop as the regulator is still not properly
> > > drive by panfrost driver[4].
> > > I will re-introduce it later.
> > >
> > > Ondřej Jirman has an Orange Pi 3, Jernej has a PineH64 and a Tanix
> > > TX6 boards and I have a Beelink GS1 board so I have enable these
> > > boards. But CPU Devfreq is really touchy has it depends on:
> > > board design, SoC speed_grade and environement which can affect
> > > thermal cooling and have different behavior for different user.
> > >
> > > If people can test this serie and give feedback, I will try to
> > > introduce this in LibreElec tree, so LE community can test it.
> >
> > Applied all of them, thanks!
>
> Please also apply "[PATCH v2 1/7] arm64: dts: allwinner: h6: Add
> clock to CPU cores" from the v2 series, otherwise cpufreq will
> not work.
>
> I can also send a missing patch adding the trip points, and cpu
> as a cooling device, that I linked in my other reply to this patch
> series afterwards, if Clément wants.

Indeed I have sent using the following cmd : "git send-email --to=XXXX HEAD~7"
from the previous version.

I should had do Instead: "git send-email --to=XXXX next/master "

Sorry for that :(
Clément

>
> regards,
>         o.
>
> > Maxime
>
>