[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200420220458.v2.2.I1976736b400a3b30e46efa47782248b86b3bc627@changeid>
Date: Mon, 20 Apr 2020 22:06:18 -0700
From: Douglas Anderson <dianders@...omium.org>
To: linus.walleij@...aro.org, bgolaszewski@...libre.com,
airlied@...ux.ie, daniel@...ll.ch, robh+dt@...nel.org,
narmstrong@...libre.com, a.hajda@...sung.com,
Laurent.pinchart@...asonboard.com, spanda@...eaurora.org
Cc: jonas@...boo.se, jeffrey.l.hugo@...il.com,
linux-gpio@...r.kernel.org, linux-arm-msm@...r.kernel.org,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
jernej.skrabec@...l.net, swboyd@...omium.org,
bjorn.andersson@...aro.org, robdclark@...omium.org,
Douglas Anderson <dianders@...omium.org>,
Sam Ravnborg <sam@...nborg.org>,
Thierry Reding <thierry.reding@...il.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/6] dt-bindings: display: Add hpd-gpios to panel-common bindings
In the cases where there is no connector in a system there's no great
place to put "hpd-gpios". As per discussion [1] the best place to put
it is in the panel. Add this to the device tree bindings.
[1] https://lore.kernel.org/r/20200417180819.GE5861@pendragon.ideasonboard.com
Signed-off-by: Douglas Anderson <dianders@...omium.org>
---
Changes in v2:
- ("dt-bindings: display: Add hpd-gpios to panel-common...") new for v2
.../devicetree/bindings/display/panel/panel-common.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
index ed051ba12084..e9a04a3a4f5f 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
@@ -96,6 +96,12 @@ properties:
(hot plug detect) signal, but the signal isn't hooked up so we should
hardcode the max delay from the panel spec when powering up the panel.
+ hpd-gpios:
+ maxItems: 1
+ description:
+ If Hot Plug Detect (HPD) is connected to a GPIO in the system rather
+ than a dedicated HPD pin the pin can be specified here.
+
# Control I/Os
# Many display panels can be controlled through pins driven by GPIOs. The nature
--
2.26.1.301.g55bc3eb7cb9-goog
Powered by blists - more mailing lists