| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <eaa00592-8b9b-458e-f445-c7f7b5bcd007@roeck-us.net>
Date: Sat, 25 Apr 2020 10:02:50 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Michael Walle <michael@...le.cc>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-hwmon@...r.kernel.org,
linux-pwm@...r.kernel.org, linux-watchdog@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Cc: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Jean Delvare <jdelvare@...e.com>,
Lee Jones <lee.jones@...aro.org>,
Thierry Reding <thierry.reding@...il.com>,
Uwe Kleine-König <u.kleine-koenig@...gutronix.de>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Shawn Guo <shawnguo@...nel.org>, Li Yang <leoyang.li@....com>,
Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Marc Zyngier <maz@...nel.org>, Mark Brown <broonie@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: Re: [PATCH v3 07/16] watchdog: add support for sl28cpld watchdog
On 4/23/20 10:45 AM, Michael Walle wrote:
> This adds support for the watchdog of the sl28cpld board management
> controller. This is part of a multi-function device driver.
>
> Signed-off-by: Michael Walle <michael@...le.cc>
Acked-by: Guenter Roeck <linux@...ck-us.net>
> ---
> drivers/watchdog/Kconfig | 11 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/sl28cpld_wdt.c | 233 ++++++++++++++++++++++++++++++++
> 3 files changed, 245 insertions(+)
> create mode 100644 drivers/watchdog/sl28cpld_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 0663c604bd64..6c53c1d0f348 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -340,6 +340,17 @@ config MLX_WDT
> To compile this driver as a module, choose M here: the
> module will be called mlx-wdt.
>
> +config SL28CPLD_WATCHDOG
> + tristate "Kontron sl28 watchdog"
> + depends on MFD_SL28CPLD
> + select WATCHDOG_CORE
> + help
> + Say Y here to include support for the watchdog timer
> + on the Kontron sl28 CPLD.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called sl28cpld_wdt.
> +
> # ALPHA Architecture
>
> # ARM Architecture
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 6de2e4ceef19..b9ecdf2d7347 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -224,3 +224,4 @@ obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o
> obj-$(CONFIG_MENZ069_WATCHDOG) += menz69_wdt.o
> obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o
> obj-$(CONFIG_STPMIC1_WATCHDOG) += stpmic1_wdt.o
> +obj-$(CONFIG_SL28CPLD_WATCHDOG) += sl28cpld_wdt.o
> diff --git a/drivers/watchdog/sl28cpld_wdt.c b/drivers/watchdog/sl28cpld_wdt.c
> new file mode 100644
> index 000000000000..2640084ace5c
> --- /dev/null
> +++ b/drivers/watchdog/sl28cpld_wdt.c
> @@ -0,0 +1,233 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * sl28cpld watchdog driver.
> + *
> + * Copyright 2019 Kontron Europe GmbH
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/watchdog.h>
> +
> +/*
> + * Watchdog timer block registers.
> + */
> +#define WDT_CTRL 0x00
> +#define WDT_CTRL_EN BIT(0)
> +#define WDT_CTRL_LOCK BIT(2)
> +#define WDT_CTRL_ASSERT_SYS_RESET BIT(6)
> +#define WDT_CTRL_ASSERT_WDT_TIMEOUT BIT(7)
> +#define WDT_TIMEOUT 0x01
> +#define WDT_KICK 0x02
> +#define WDT_KICK_VALUE 0x6b
> +#define WDT_COUNT 0x03
> +
> +#define WDT_DEFAULT_TIMEOUT 10
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
> + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +static int timeout;
> +module_param(timeout, int, 0);
> +MODULE_PARM_DESC(timeout, "Initial watchdog timeout in seconds");
> +
> +struct sl28cpld_wdt {
> + struct watchdog_device wdd;
> + struct regmap *regmap;
> + u32 offset;
> + bool assert_wdt_timeout;
> +};
> +
> +static int sl28cpld_wdt_ping(struct watchdog_device *wdd)
> +{
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> + return regmap_write(wdt->regmap, wdt->offset + WDT_KICK,
> + WDT_KICK_VALUE);
> +}
> +
> +static int sl28cpld_wdt_start(struct watchdog_device *wdd)
> +{
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
> + unsigned int val;
> +
> + val = WDT_CTRL_EN | WDT_CTRL_ASSERT_SYS_RESET;
> + if (wdt->assert_wdt_timeout)
> + val |= WDT_CTRL_ASSERT_WDT_TIMEOUT;
> + if (nowayout)
> + val |= WDT_CTRL_LOCK;
> +
> + return regmap_update_bits(wdt->regmap, wdt->offset + WDT_CTRL,
> + val, val);
> +}
> +
> +static int sl28cpld_wdt_stop(struct watchdog_device *wdd)
> +{
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> + return regmap_update_bits(wdt->regmap, wdt->offset + WDT_CTRL,
> + WDT_CTRL_EN, 0);
> +}
> +
> +static unsigned int sl28cpld_wdt_get_timeleft(struct watchdog_device *wdd)
> +{
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
> + unsigned int val;
> + int ret;
> +
> + ret = regmap_read(wdt->regmap, wdt->offset + WDT_COUNT, &val);
> +
> + return (ret < 0) ? 0 : val;
> +}
> +
> +static int sl28cpld_wdt_set_timeout(struct watchdog_device *wdd,
> + unsigned int timeout)
> +{
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
> + int ret;
> +
> + ret = regmap_write(wdt->regmap, wdt->offset + WDT_TIMEOUT, timeout);
> + if (!ret)
> + wdd->timeout = timeout;
> +
> + return ret;
> +}
> +
> +static const struct watchdog_info sl28cpld_wdt_info = {
> + .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
> + .identity = "sl28cpld watchdog",
> +};
> +
> +static struct watchdog_ops sl28cpld_wdt_ops = {
> + .owner = THIS_MODULE,
> + .start = sl28cpld_wdt_start,
> + .stop = sl28cpld_wdt_stop,
> + .ping = sl28cpld_wdt_ping,
> + .set_timeout = sl28cpld_wdt_set_timeout,
> + .get_timeleft = sl28cpld_wdt_get_timeleft,
> +};
> +
> +static int sl28cpld_wdt_probe(struct platform_device *pdev)
> +{
> + struct watchdog_device *wdd;
> + struct sl28cpld_wdt *wdt;
> + struct resource *res;
> + unsigned int status;
> + unsigned int val;
> + int ret;
> +
> + if (!pdev->dev.parent)
> + return -ENODEV;
> +
> + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> + if (!wdt)
> + return -ENOMEM;
> +
> + wdt->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> + if (!wdt->regmap)
> + return -ENODEV;
> +
> + res = platform_get_resource(pdev, IORESOURCE_REG, 0);
> + if (!res)
> + return -EINVAL;
> + wdt->offset = res->start;
> +
> + wdt->assert_wdt_timeout = device_property_read_bool(&pdev->dev,
> + "kontron,assert-wdt-timeout-pin");
> +
> + /* initialize struct watchdog_device */
> + wdd = &wdt->wdd;
> + wdd->parent = &pdev->dev;
> + wdd->info = &sl28cpld_wdt_info;
> + wdd->ops = &sl28cpld_wdt_ops;
> + wdd->min_timeout = 1;
> + wdd->max_timeout = 255;
> +
> + watchdog_set_drvdata(wdd, wdt);
> + watchdog_stop_on_reboot(wdd);
> +
> + /*
> + * Read the status early, in case of an error, we haven't modified the
> + * hardware.
> + */
> + ret = regmap_read(wdt->regmap, wdt->offset + WDT_CTRL, &status);
> + if (ret < 0)
> + return ret;
> +
> + /*
> + * Initial timeout value, may be overwritten by device tree or module
> + * parmeter in watchdog_init_timeout().
> + *
> + * Reading a zero here means that either the hardware has a default
> + * value of zero (which is very unlikely and definitely a hardware
> + * bug) or the bootloader set it to zero. In any case, we handle
> + * this case gracefully and set out own timeout.
> + */
> + ret = regmap_read(wdt->regmap, wdt->offset + WDT_TIMEOUT, &val);
> + if (ret < 0)
> + return ret;
> +
> + if (val)
> + wdd->timeout = val;
> + else
> + wdd->timeout = WDT_DEFAULT_TIMEOUT;
> +
> + watchdog_init_timeout(wdd, timeout, &pdev->dev);
> + sl28cpld_wdt_set_timeout(wdd, wdd->timeout);
> +
> + /* if the watchdog is locked, we set nowayout */
> + if (status & WDT_CTRL_LOCK)
> + nowayout = true;
> + watchdog_set_nowayout(wdd, nowayout);
> +
> + /*
> + * If watchdog is already running, keep it enabled, but make
> + * sure its mode is set correctly.
> + */
> + if (status & WDT_CTRL_EN) {
> + sl28cpld_wdt_start(wdd);
> + set_bit(WDOG_HW_RUNNING, &wdd->status);
> + }
> +
> + ret = devm_watchdog_register_device(&pdev->dev, wdd);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to register watchdog device\n");
> + return ret;
> + }
> +
> + dev_info(&pdev->dev, "initial timeout %d sec%s\n",
> + wdd->timeout, nowayout ? ", nowayout" : "");
> +
> + return 0;
> +}
> +
> +static const struct of_device_id sl28cpld_wdt_of_match[] = {
> + { .compatible = "kontron,sl28cpld-wdt" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, sl28cpld_wdt_of_match);
> +
> +static const struct platform_device_id sl28cpld_wdt_id_table[] = {
> + { "sl28cpld-wdt" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(platform, sl28cpld_wdt_id_table);
> +
> +static struct platform_driver sl28cpld_wdt_driver = {
> + .probe = sl28cpld_wdt_probe,
> + .id_table = sl28cpld_wdt_id_table,
> + .driver = {
> + .name = KBUILD_MODNAME,
> + .of_match_table = sl28cpld_wdt_of_match,
> + },
> +};
> +module_platform_driver(sl28cpld_wdt_driver);
> +
> +MODULE_DESCRIPTION("sl28cpld Watchdog Driver");
> +MODULE_AUTHOR("Michael Walle <michael@...le.cc>");
> +MODULE_LICENSE("GPL");
>
Powered by blists - more mailing lists