linux-kernel - Re: [PATCH v3 2/3] dt-bindings: add Qualcomm IPQ4019 MDIO bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CA+HBbNF4S=o059AwW3UpNQ8+US1PCQ_edZM+O0m8r0ozJ5TBfw@mail.gmail.com>
Date:   Tue, 28 Apr 2020 18:40:56 +0200
From:   Robert Marko <robert.marko@...tura.hr>
To:     Rob Herring <robh@...nel.org>
Cc:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King - ARM Linux admin <linux@...linux.org.uk>,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Mark Rutland <mark.rutland@....com>,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        devicetree@...r.kernel.org, Luka Perkov <luka.perkov@...tura.hr>
Subject: Re: [PATCH v3 2/3] dt-bindings: add Qualcomm IPQ4019 MDIO bindings

On Tue, Apr 28, 2020 at 5:09 PM Rob Herring <robh@...nel.org> wrote:
>
> On Wed, Apr 15, 2020 at 05:02:46PM +0200, Robert Marko wrote:
> > This patch adds the binding document for the IPQ40xx MDIO driver.
> >
> > Signed-off-by: Robert Marko <robert.marko@...tura.hr>
> > Cc: Luka Perkov <luka.perkov@...tura.hr>
> > ---
> > Changes from v2 to v3:
> > * Remove status from example
> >
> >  .../bindings/net/qcom,ipq40xx-mdio.yaml       | 61 +++++++++++++++++++
> >  1 file changed, 61 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/net/qcom,ipq40xx-mdio.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/net/qcom,ipq40xx-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq40xx-mdio.yaml
> > new file mode 100644
> > index 000000000000..8d4542ccd38c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/qcom,ipq40xx-mdio.yaml
> > @@ -0,0 +1,61 @@
> > +# SPDX-License-Identifier: GPL-2.0
>
> Dual license new bindings please:
>
> (GPL-2.0-only OR BSD-2-Clause)
Ok, will change it in next revision.
>
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/qcom,ipq40xx-mdio.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm IPQ40xx MDIO Controller Device Tree Bindings
> > +
> > +maintainers:
> > +  - Robert Marko <robert.marko@...tura.hr>
> > +
> > +allOf:
> > +  - $ref: "mdio.yaml#"
> > +
> > +properties:
> > +  compatible:
> > +    const: qcom,ipq40xx-mdio
>
> Don't use wildcards in compatible names. Should be SoC specific. If 'all
> the same', then use a fallback to the 1st implementation.
Ok, I will change it to qcom,ipq4019 then.
The whole IPQ40xx series uses the same controller.
>
> > +
> > +  "#address-cells":
> > +    const: 1
> > +
> > +  "#size-cells":
> > +    const: 0
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - "#address-cells"
> > +  - "#size-cells"
> > +
> > +examples:
> > +  - |
> > +    mdio@...00 {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +      compatible = "qcom,ipq40xx-mdio";
> > +      reg = <0x90000 0x64>;
> > +
> > +      ethphy0: ethernet-phy@0 {
> > +        reg = <0>;
> > +      };
> > +
> > +      ethphy1: ethernet-phy@1 {
> > +        reg = <1>;
> > +      };
> > +
> > +      ethphy2: ethernet-phy@2 {
> > +        reg = <2>;
> > +      };
> > +
> > +      ethphy3: ethernet-phy@3 {
> > +        reg = <3>;
> > +      };
> > +
> > +      ethphy4: ethernet-phy@4 {
> > +        reg = <4>;
> > +      };
> > +    };
> > --
> > 2.26.0
> >