lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200429124017.397-1-thunder.leizhen@huawei.com>
Date:   Wed, 29 Apr 2020 20:40:17 +0800
From:   Zhen Lei <thunder.leizhen@...wei.com>
To:     Wolfram Sang <wsa+renesas@...g-engineering.com>,
        linux-i2c <linux-i2c@...r.kernel.org>,
        linux-kernel <linux-kernel@...r.kernel.org>
CC:     Zhen Lei <thunder.leizhen@...wei.com>
Subject: [PATCH 1/1] i2c: sh_mobile: eliminate a misreported warning

The warning is caused by the branches "if (pd->pos == -1)" and
"if (pd->pos == 0)", because they appear after "real_pos = pd->pos - 2",
so the compiler doesn't known the value of real_pos is negative through
these two branches.

To avoid this warning, eliminate the middleman "data".

drivers/i2c/busses/i2c-sh_mobile.c: In function ‘sh_mobile_i2c_isr’:
drivers/i2c/busses/i2c-sh_mobile.c:396:26: warning: ‘data’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   pd->msg->buf[real_pos] = data;
                          ^
drivers/i2c/busses/i2c-sh_mobile.c:369:16: note: ‘data’ was declared here
  unsigned char data;

Signed-off-by: Zhen Lei <thunder.leizhen@...wei.com>
---
 drivers/i2c/busses/i2c-sh_mobile.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index d83ca4028fa0..2cca1b21e26e 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -366,7 +366,6 @@ static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
 
 static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
 {
-	unsigned char data;
 	int real_pos;
 
 	/* switch from TX (address) to RX (data) adds two interrupts */
@@ -387,13 +386,11 @@ static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
 		if (real_pos < 0)
 			i2c_op(pd, OP_RX_STOP);
 		else
-			data = i2c_op(pd, OP_RX_STOP_DATA);
+			pd->msg->buf[real_pos] = i2c_op(pd, OP_RX_STOP_DATA);
 	} else if (real_pos >= 0) {
-		data = i2c_op(pd, OP_RX);
+		pd->msg->buf[real_pos] = i2c_op(pd, OP_RX);
 	}
 
-	if (real_pos >= 0)
-		pd->msg->buf[real_pos] = data;
  done:
 	pd->pos++;
 	return pd->pos == (pd->msg->len + 2);
-- 
2.26.0.106.g9fadedd


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ