linux-kernel - Re: [PATCH v3 1/2] arm: rpi: Add function to trigger VL805's firmware load

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <f162c378380dc4b1bd2af24b44b30082b6e1e310.camel@suse.de>
Date:   Wed, 06 May 2020 10:31:51 +0200
From:   Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To:     Bin Meng <bmeng.cn@...il.com>
Cc:     mbrugger@...e.com, U-Boot Mailing List <u-boot@...ts.denx.de>,
        Marek Vasut <marex@...x.de>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        Simon Glass <sjg@...omium.org>, m.szyprowski@...sung.com,
        Sylwester Nawrocki <s.nawrocki@...sung.com>,
        mark.kettenis@...all.nl
Subject: Re: [PATCH v3 1/2] arm: rpi: Add function to trigger VL805's
 firmware load

Hi Bin,

On Wed, 2020-05-06 at 13:33 +0800, Bin Meng wrote:
> Hi Nicolas,
> 
> On Wed, May 6, 2020 at 12:26 AM Nicolas Saenz Julienne
> <nsaenzjulienne@...e.de> wrote:
> > On the Raspberry Pi 4, after a PCI reset, VL805's (a xHCI chip) firmware
> > may either be loaded directly from an EEPROM or, if not present, by the
> > SoC's VideCore (the SoC's co-processor). Introduce the function that
> > informs VideCore that VL805 may need its firmware loaded.
> > 
> 
> I still did not get it. Without the firmware being loaded, does xHCI
> on RPi 4 still work?

On newer revisions of RPi4, no, it will not work.

> What exact functionality does the firmware provide?

It provides xHCI functionality.

The old RPi4 design loaded this vl805 firmware trough a dedicated EEPROM
memory. But they removed it, probably in order to save costs. They then created
this new interface to trigger a firmware load from RPi4's co-processor.

Regards,
Nicolas


Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)